similar to: Ringback problem. Order of "183 Session Progress" and "180 Ringing"

Hello everyone! I've had this problem for a while and cant figure it out. When an outside caller calls an extension on my asterisk system, they do not hear any sort of ringing. Inside extensions calling other extensions do hear ringing. We have 3 other asterisk systems that are configured the same way, but do not have this problem. We think it has something to do with asterisk 1.6. The other

I don't expect my SIP provider to provide useful "Remote-Party-ID" information. Therefore, I am using "CONNECTEDLINE(num)=xxx" AND "CONNECTEDLINE(name)=yyy" to populate remote party information from a local database. I am also using the "I" (upper case "i") option for Dial. Generally I like to see to see the remote party name appear on the

Hello! I migrated asterisk 11 to 13 as user of FreePBX 12.0.76.2. As customer of German Telekom, I have three numbers and therefore three trunks - each number is bound to one trunk. After migration, some callers complained about missing ringback tone: they didn't hear any ring tone and where surprised that they suddenly got me anyway :-). The connection afterwards was as expected. Deeper

Hi, I have the following situation: At a branch , there is a Cisco Call Manager with users all having Cisco phones. Now I put down a Asterisk 1.2.12 box at the branch, which talks H323 via chan_oh323 to the CCM. So calls go from the CCM, go H323 to the local Asterisk box, then I take it via SIP to another Asterisk box. From there I am hooked up to 2 different providers, for Local and

Any ideas on why callers who call into my customer's SIP trunk are not hearing a ringback tone? I had this on one other asterisk system, and wound up needing to set progressinband=yes in the SIP trunk config. I have set this on the current system & restarted asterisk, but to no avail. I am using: AsteriskNOW distro Asterisk build is 1.6 from AsteriskNOW repository:

On 12.12.18 at 19:43 Joshua C. Colp wrote: > On Wed, Dec 12, 2018, at 12:31 PM, Michael Maier wrote: > > <snip> > >> >> The problem: The extension doesn't create a ringback locally, because >> it most probably expects it to >> be sent by the callee - but the callee doesn't send anything (not >> surprising, because there has been >>

Hello! An extension registered at asterisk 13.23 initiates an external call (pjsip). After the Invite, the callee (-> ISP) sends a 100 Trying 183 Session Progress (*without* SDP) Asterisk now sends to the extension: 183 Session Progress (*with* SDP) 183 Session Progress (*with* SDP) (really two times) The callee meanwhile sends 180 Ringing (*without* SDP) which is

Model: Tripp-lite OMNIVS1500 Error: Network UPS Tools - UPS driver controller 2.2.1- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.1-) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: unknown/unknown libusb_set_report() returned -1 instead of 8 Could not reset watchdog. Please send model information to nut-upsdev mailing

My last problem was nicely solved through this mailing list so hopefully this new problem will have the same happy outcome. My situation is that I have many extensions. Here is a sample: [client-phone](!) type=friend host=dynamic secret=XXXXXXXXXX dtmfmode=auto disallow=all allow=ulaw allow=gsm allow=g723 allow=ilbc subscribemwi=no [4165555555](client-phone) secret=xxxxxxxxxxxxxxxxxxxxxxxxxx

Whoops, email client auto-filled dev previously. Let's try this again. Michael Maier wrote: <snip> > Ok - but this doesn't seem to answer my main question: > > Why must > > progressinband=never > > be applied especially if asterisk uses it by default? The big difference > between w/ and w/o it is: The default in 13 is "no" which still

Hello, We have an asterisk 1.2.13 box that use a Digium TE205P T1 PRI connect to the telco, users mainly use snom 320/300 SIP phones. When dialing to an external phone number with custom ringback music, users reported that they could not hear the music but can only hear the standard ring tone generated by the system. Is there any kind of settings need to allow the ringback music pass to the

Hi, I am using asterisk 1.8.22 and have a problem when calling in parallel several SIP endpoints and I am not sure how to resolve it. In this case Asterisk will not bridge any audio to the caller before the 200 OK. Which means any progress announcements, including remotely generated ringback, are not passed back to the caller. This behavior is completely correct, because there is no way to know

Asterisk and the one that doesn't work returns 100 trying followed by 183 session progress. It is my understanding that 180 ringing causes ringback to be generated by the callee, while 183 means that the caller has early media and will send ringback through RTP. Anyone have any idea why I wouldn't get ringback in this case? Should Asterisk be passing through the early media to the first

Hi All, We have a Cisco CME linked to our Asterisk PBX (named 'epstein'). Off said PBX we have numerous other PBX's, some IAX and some SIP. On a call placed from CME (SIP) to 'epstein' it all works fine except for a few quirks. When calling through epstein to an IAX peer we get '100 trying' followed by '180 ringing' sent back down the SIP leg to CME.

I would just like to follow-up on the ringback problem I'm getting from *. As I've said in my previous post, I am not hearing the "real ringback" from the Cisco gateway terminating my call. I don't want to provide false ringback from * (r option of dial), because it'll still give me ringback even if I am suppose to hear announcement or fastbusy. Below is captured ISDN

I am trying to get Asterisk to emulate the sounds of the earlier telephone systems, and the settings in [us-old] are pretty helpful. The only thing lacking is ringback tone, which is not quite as complex as the real phone systems of the day. For example, it is true that a ringback tone commonly used is 420Hz modulated by 40Hz. This is what shows up in [us-old]. But that modulated tone was

I have progressinband=yes in sip.conf, but Asterisk sends a 180-Ringing to my polycom phones and then it also sends 183-Session Progress. That doesn't seem to make sense. Shouldn't Asterisk NOT send 180-Ringing if progressinband=yes ? Doug.

Hi to all I'm a new user of TDM400P card. The configuration is OK and I have no problem for incoming call. When I try to place a outgoing call towards a PSTN number the call is not always answered. In other words TDM400P seems to not understand that the call has been accepted from the remote party. In other cases (different extension) the call is accepted succesfully. In my opinion TDM400P DSP

Hello, My company is doing some * testing with our Class 5 softswitch and had some questions regarding ringback being provided to our PSTN users (off --> on net calling) Currently with MGCP subscribers, we know the PSTN ringing is provided by a digital PBX for example, However, it looks like with SIP, our softswitch is relying on MGCP signaling on our PSTN gateways to provide ringback

are you giving answer()? ..o-------------------------------------------------------o.. Brian Fertig Network/Systems Engineer IT Administrator Planet Telecom, Inc. Tampa,FL Office -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Juan Jose Comellas Sent: Friday, September 30, 2005 10:32 AM To: Asterisk Users