similar to: particular sip registry and outbound proxy

Hello List I work at an SIP Provider and we have added and SBC in front of our Voice Switch to protect it. This requires all our SIP Trunk customers to register via a 'proxy'. I struggle with Asterisk to work over a proxy. This is what I have done so far. register => username at sip.example.com:password at sbc.example.com This works fine, asterisk is sending registrations via the

Hi, I'm going to forward SIP request to special outbound SIP proxy with none SIP port. I have this in my sip.conf [sip_proxy-out] type=peer ; we only want to call out, not be called username=408 host=192.168.0.95 outboundproxy=192.168.0.74 port=9097 I want a To: 408 at 192.168.0.95 by proxy 192.168.0.74:9097 but it turns out the "To" also has the port To: 408 at

I've set up plenty of Asterisk boxes but never one that had to deal with a proxy server to be able to use a line. Using "X-Lite" I have no issue with settings as follows: Display Name: Any Name User name: 00575000010XXXX Password: 00575000010XXXX Authorization user name: <blank> Domain: directnationalloan.com Checked "Register with domain" and "Send outbound

In the latest release of chan_sip2 I've added support for SIP Outbound Proxy. I've seen a lot of requests for that lately, so if you can test this and confirm wheather it works for you or not, I'll be grateful. If I get positive reports, we'll try to add this to chan_sip in CVS. It works like this: * Configure outboundproxy in the general section of sip.conf outboundproxy =

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Guenther Boelter <gboelter at gmail.com> schrieb: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > On 05/31/2015 02:31 PM, Luca Bertoncello wrote: > > Hi list! > > > > Now all works as expected, at least in the simulation I did with > > AsteriskNOW. Hopefully it will work later, when Deutsche Telekom

Hi All, I'm connecting to my carrier which requires setting of outboundproxy. There has been few cases where the proxy server failed due to network issues and required us to use a secondary one. Is there a timeout or qualify setting for outboundproxy setting in sip.conf? I do appreciate if anyone can help please. Thank you -Abeed -------------- next part -------------- An HTML attachment

I'm having some trouble turning with trunk monitoring while using an outbound proxy. While all other sip messaging (e.g. calls) respects the outboundproxy setting, Options packets from setting qualify=yes do not. Asterisk tried to send the Options message directly to the "host=" IP, instead of the "outboundproxy=" IP as it should, verified with tcpdump. I've done a

Hi all, a noob here, I am trying to get outbound calls through asterisk working with Broadvoice. I have consulted the following two online tutorials: http://www.broadvoice.com/support_install_asterisk.html http://www.voip-info.org/wiki/view/Asterisk+settings+Broadvoice in an effort to make outbound calls. My current settings are as follows: sip.conf register =>

Is it possible to set an outboundproxy for REGISTER from Asterisk? register => xxx:yyy at sip99.foobar.com [foobar] type=peer host=sip99.foobar.com disallow=all allow=g729 canreinvite=no secret=yyy fromuser=xxx port=5099 outboundproxy=xxx.42.149.69 However, SIP REGISTER still goes directly to sip99.foobar.com, not xxx.42.149.69. Thanks, Doug.

Hi, I'm trying to enable sip.conf outboundproxy support in version 1.4.20.1 of Asterisk, but for the tests I made, every calls, even internal SIP calls between extensions are sent over the proxy that I have specified with the outboundproxy=xxx.xxx.xxx.xxx in sip.conf. I think this isn't the expected behaviour, right? Only OUTBOUND calls should go through the proxy, right? Am I doing

hi there I'm setting up asterisk@home and I'm using Polycom IP 500 phones. When I call a number that has a digital receptionist (i.e. "dial 1 or such and such, dial 2 for this and that...") the Polycom doesn't seem to send the extra digits. When I try it with X-Lite things appear to work fine, so I think the problem is with the Polycom configuration. Here's some

Hello, I try configuring Quintum DX gateway as link to PSTN for *. Now, I can dial number which is connect to Quintum, and call is diverted to *. I don't know what I should set, if I want call from SIP_phone registred in Asterisk to PSTN via Quitnum. I set in sip.conf account for Quintum [sip_proxy-out] type=peer outboundproxy=QUINTUM_IP , and changed extensions.conf. When

I am trying to configure a Polycom IP4000 for use with Asterisk 1.4.5 on a flat local network. I followed the provisioning guides that I found on the Web, and I have the phone downloading bootrom.ld, sip.ld, and a bunch of configuration files. This all works properly. However, I receive the following error: NOTICE[27345]: chan_sip.c:14725 handle_request_register: Registration from

Darryl Moore <darryl at moores.ca> schrieb: > Ahh. Seen that before! That suggests to me that you don't have your > sip.conf records setup right. > > What's your sip.conf look like? Well, here what I wrote in my sip.conf: register => 00493511111111:MYSECRET at pbxluca/00493511111111 register => 00493512222222:MYSECRET at pbxfax/00493512222222 register =>

Hello i am trying to setup sipgate gateway i can get incoming calls fine, but when i dial in and then try to dial out i get this in asterisk command line -- Called 01179248615 at sipgate [Sep 18 13:58:30] NOTICE[28232]: chan_sip.c:17885 handle_response_invite: Failed to authenticate on INVITE to '"01179553708" <sip:SIP-ID at sipgate.co.uk>;tag=as30eb9dd1' --

Hello, I installed Asterisk 1.6.2.17.3 ( latest as of yesterday ) and had multiple problems with DTMF. I have two machines, we'll call them asterisk and asterisk-pri. Asterisk does IVR and asterisk-pri has a PRI card in it and connects to the PSTN. The two servers communicate via SIP with RFC2833. I setup logger.conf on both machines to display DTMF to the console. Both are built from

I'm stumped on this one and any help would be greatly appreciated. I'm just trying to get my Polycom 601 to have multiple extensions on it. For example, on line 1 I want extension 21, on line 2 I want extension 22, and on line 3 I want extension 23. Ideally I'd actually have each extension appear on 2 lines and therefore filling up all 6. I should be able to do that with the

It looks like chan_sip2 may solve my problem with outboundproxy support. However, I am having problems getting the solution installed. From what I understand these are the tasks... Add chan_sip2 to the channels/Makefile * Rename the file downloaded to chan_sip2.c * make / make install * Change your modules.conf Add "noload=chan_sip.so" if you want to run chan_sip2 * Restart

Hi, I have been using Cisco 7960's with Asterisk for years. I am trying get a 7961 working and have a problem. In my configuration, not all of my line appearances register to the same Asterisk SIP server. I have an Asterisk server at home and another at work. My Line 1 button registers to the home server and my Line 2 button registers to the work server. This has worked for years

Thanks, Mark! Here's a summary of what one needs to do in order to get NAT working with Asterisk. Please note that I have a Cisco ATA-186, and your experience may be slightly different based on the equipment you're using. You'll need to have a CVS updated version of Asterisk as 2003-03-06 ~2:00 PM EST. NOTE: This currently works for outbound calling only, not inbound. In other