similar to: How to connect asterisk PBX to PSTN

Hi all, I am planning to do clustering for my company's asterisk servers. I dont know much about it, just read some articles on the internet and learned how to use DUNDi and some basic information about clustering. What I need to know is: 1. can i register end user with multiple asterisk servers at a time? 2. If not, Can I re-route registeration requests to different servers using 1 asterisk

I have a customer that has a Trendnet TEW-435BRM router which has the bad habit of rewriting all external connections so the Asterisk server only sees the IP address of the router itself. Up to today this has not been a problem since all extensions are on the local network but now they want to have a couple external IP phones (SIP). I opened up the ports on the router and my phone can register.

Hi, i'm looking to update some SRV DNS Record , but i didn't find the correct syntax to handle priority, weight and port. The goal is to higher the priority of one of my different DCs. Thanks for your help Alain

Hi, I am facing issue while generating a dial plan for the following case: all caller should be asked a code to enter than All the callers should be connected one extension. also tell me testing scenario : I have pbx setup and currently I have soft phones to use as extension. Currently I have created a dial plan using vdp I tried submitting it here but I don't know how to extract text

Hi, We installed a samba4 AD controller using Gpo for a small group of users (5 users), everything is OK. (Samba4 beta 7 on Ubuntu 12.04) We installed another Samba4 AD controller as a BDC of the first one with the command "samba-tool domain join" with succes. After checking this new installation, we saw that the sysvol share was not replicated from the PDC and all the Policies are

Dear All, I''m trying to configure Xen on a laptop with a BCM4401 ethernet board The Debian xen kerner 2.6.18-5 is not handling wlll that board I get the follwing in messages b44: Probe failed with error -5 Any help is welcome Regards Maurice _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

This is the error I get while building Xen-3.2.1 when I do a make =============================================== make[2]: Entering directory `/usr/src/xen-3.2.1/tools/check'' LIBXENAPI_BINDINGS=n ACM_SECURITY=n ./chk build Xen CHECK-BUILD Fri Jul 18 11:36:34 IST 2008 Checking check_crypto_lib: OK Checking check_curl: unused, OK Checking check_openssl_devel: *** Check for openssl

Thanks Jim for looking into that, I was really starting to wonder what was going on. Let me know if you find a way to tell the compiler to stop complaining. Jean-Marc Jim Crichton a ?crit : > I looked back at my old C55 EC build, and I had the same warning in > mdf.c which Mike found. The assembly code did have a valid shift, and > this build did cancel echo. > > When I built

Hello! I'm trying to registers events of queues in /var/log/asterisk/queue_log and Mysql database .I have configured realtime queue_log on MySQL and works well, but /var/log/asterisk/queue_log file is empty, since you're not registering events of queues. Removing extconfig.conf configurations (queue_log => mysql,general), /var/log/asterisk/queue_log works well, events logs on

hello, I am attempting to compile a Dom0 CentOS 5.2 guest from source, using XenLinux 2.6.18.8 with a Xen 3.2.1 hypervisor. I am able to compile the Dom0 kernel, but when I attempt to boot into it, I receive the following messages: mount: could not find filesystem ''/dev/root'' setuproot: moving /dev failed: No such file or directory setuproot: error mounting /proc: No such

Hi, I'm use a DSP C5510 to implement a solution with voice, but I'm a beginner in the world of DSP, any one has a example or documents about how to use a speex in DSP's ???? Thanks. Att.; Rafael Vieira Gon?alves skype: rafaelvieira.goncalves msn: tux_surf at hotmail.com email: daconfama at gmail.com P Antes de imprimir, pense em sua responsabilidade e compromisso com o

Dear All, This is hard to describe so I made a simple example. set.seed(1001) total <- 0 data <- vector("list", 30) for(i in 1:30) { data[[i]] <- runif(50) } Let's call a data set runif(50). While the for loop is running, 100 data sets are generated. I want to restore 23th data set (the data set generated in 23th for loop) without the loop. I've tried set.seed(1023)

I know in v1.6 its part of logger.c but I noticed this: https://issues.asterisk.org/bug_view_advanced_page.php?bug_id=11625 However, it doesn't seem to ever been applied to any version of 1.4.x branch.. Nor can I figure out what it was applied to? This is over 3 years old, you would of figured it would have been applied to 1.4 at some point in time.. Any ideas?

Jim Crichton a ?crit : > I played briefly with the echo canceller on the C5509A back in May > 2006. I got the same compiler warnings, and sent a message to the > list which included this: > > "I got several compiler warnings for "shift out of range" in mdf.c, > which I fixed by adding EXTEND32 to all of the SHL32s with 16 bit > operands (st->frame_size in 6

Hi Jim, Thanks a lot for investigating. It definitely makes sense now. I'll fix the problem now. Is there any other place where you see that same (or similar) problem? Jean-Marc Jim Crichton a ?crit : > Jean-Marc, > > I dug into this further, and found that the warning occurred when PSHR32 > had a shift greater than 15. > > in fixed_generic.h, PSHR32 is defined as: >

Thanks Jim, But i didnt find this project... It's in CCS folder or on TI site ????? Thk's Em 08/04/2008, ?s 15:52, Jim Crichton escreveu: > The TI directory of the Speex source distribution contains a C5509A > project that builds and runs in TI's Code Composer Studio > simulator. This project does file I/O to files specified in the > main source file. See

Here I am expecting to be configured following scenario: User calls : it will play a sound will ask for input DTMF, then call will be given to particular extension for any DTMF entered. But its not working as expected. I have attached the dial plan file. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Why do CDR second field, src field have a dest???? The real src field is 9500. Is a bug?? Example; "Q-aereos","1147938811","9500","outbound","1147938811","DAHDI/31-1","SIP/9500-0de0ea60","Dial","SIP/9500|60|t","2009-08-11 18:12:41","2009-08-11 18:12:45","2009-08-11

yes, our DSP is 16 bit based, and if those bits of code aren't using 32 bit variables then yes that is what the warnings would be. Does this mean that the preprocessor and echo canceller won't work as well because of this? -Mike >>> Jean-Marc Valin <jean-marc.valin@usherbrooke.ca> 01/18/08 8:42 PM >>> I think these warnings are due to your DSP being 16-bit and

That sounds like the ideal app for me too. Fring requires we register with Fring and give them user id/password pair. In our case it did not work until we put a public IP on our Asterisk. I just bought WeePhone and I'll give it a try on the iPhone. Cheers, Enrique -----Mensaje original----- De: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] En