Displaying 20 results from an estimated 2000 matches similar to: "GXP-21XX"
2005 Mar 14
18
Grandstream GXP-2000
FYI, spoke with Grandstream this morning, the GXP-2000 release has been
delayed again. Looking like April now before these hit the street.
--
Cory Andrews
Senior Partner
VOIPSupply.com
+++++++++++++
V: 800.398.VOIP X22
F: 716.630.1548
E: Cory@VOIPSupply.com
2006 Oct 30
6
How to do Automatic Daylight Saving on Grandstream GXP-2000
Hi,
I'd set the daylight saving option to yes on all the GXP-2000 phones, but
apparantly it doesn't move it an hour back on last sunday of October. So now
I am stuck will all the phones showing the wrong time. Isn't there an option
so that it'll automatically update daylight savings?
Thanks
--
Zeeshan A Zakaria
-------------- next part --------------
An HTML attachment was
2009 Jan 16
4
Snom 300 vs Grandstream gxp
Can anyone who has used both comment on the pros and cons ? Need to buy
about 30 of these, for a small company with limited IT support.
Julian
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
2007 Oct 24
1
Grandstream GXP-2000's and Asterisk.
I have 5 GXP 2000's with firmware 1.1.4.25 running with Asterisk 1.4.13.
Is anyone else getting the following error in the asterisk console:
[Oct 22 11:39:01] WARNING[7100]: rtp.c:1142 ast_rtp_read: RTP Read too short
every couple of seconds when a handset is in a call?
I didn't notice this happening when I was using an older GXP2000 with
the same firmware (doesn't mean that it
2006 Jun 06
10
GXP-2000
I'm using a few GXP-2000 with firmware 1.0.2.13 and everything seems
to be working fine. However, there are a couple of issues I'd like to
know if are possible:
1) Even though the phone has 4 line appearances, if I am speaking on
a line, the phone can no longer receive phone calls. I can manually
select another line and make calls, but when Asterisk tries to send a
call to it, I
2005 Dec 31
6
GXP-2000 fw 1.0.1.13 and NTP
Hi all
Slightly OT but I know a lot of GS experts hang out here - I just upgraded a
GXP-2000 to firmware 1.0.1.13 to try out the BLF functionality with Asterisk
(which so far works as expected), but as a side-effect the phone won't sync
with an NTP server - I've tried different server names (time.nist.gov and
pool.ntp.org) and IPs in the config, but it refuses to update the time on
2009 Jan 14
1
gxp2000 and no sound asterisk 1.6
Hi
I have a grandstream gxp-2000 and trying it on an asterisk 1.6.
When I call internally between extensions I can hear the other person in the gxp2000, but when I call externally from the gxp I can't hear the person on the other end, but he can hear me.
How do you configure the grandstream 2000 to work on asterisk 1.6?
Regards
/ralf
________________________________________________
Ralf
2005 Jun 08
5
GXP2000 and hint LED's
Asterisk 1.0.7
Has anyone got the hint function working, and maybe with the GXP2000.
I am testing with 2 GXP2000 phones (firmware 1.0.1.9) at the moment
trying to get the LED's to light up.
On ext 690, button 1 is setup for ext 691, I did this using both methods
691, and <sip:691@192.168.69.1>
On ext 691, button 1 is setup for ext 690, I did this using both methods
690, and
2005 Jul 20
5
Grandstream GXP2000 resetting all the time
All,
I have AAH 1.0 installed using Digium TDM04B and Grandstream GXP2000 phones.
All seems well other than the phones have to be reset up to 5 times per day.
It is like they lose thier ip connection or maybe thier SIP connection. Has
anyone else experienced this issue? I have the phones set for static IP
addresses and that doesnt seem to help either. Any help would be greatly
2015 Mar 12
2
GXP 1405 and asterisk
Hi list, someone has successfully change different ringtone from
dialpan with asterisk with this model Granstream?
for example:
exten => 0,1,Playback(pls-wait-connect-call)
same=> n,SIPAddHeader(Alert-Info:;info=ring3)
same=> n,Dial(SIP/310&SIP/318,30,t)
can not get it to work
any idea o tips?
regardss
--
rickygm
http://gnuforever.homelinux.com
2006 Jan 04
5
Grandstream web configuration utility
I just purchased a Grandstream gxp-2000, budgetone102 and a HT-386.
Browsing to each device by IP address, I can get logged in using admin
and I can see the advanced settings, however, if I try to change the
settings and clicking the Change button, it just brings me back to ask
for the password again..
I can't get into the Status page or any of the Account1-4 pages either.
It just keeps
2006 Jun 17
4
Which phones are good, or at least acceptable, for home and office
I am looking to replace all of the old "Bell" (POTS) phones in my home
and office with IP phones. As you can imagine I don't have a huge
budget to work with but I want phones that will provide acceptable voice
quality and durability.
There are basically three categories as I see it
1. satellite phones (low cost, low function)
2. primary domestic phone (good quality, POE capable,
2006 Dec 17
5
BLF on GXP2000
I am trying to set up the BLF on a GXP2000.
Currently what I have is
extensions.conf:
[globals]
polycom430=SIP/101
[internal]
exten => 101,1,Macro(voicemail,${polycom430})
[macro-voicemail]
exten => s,1,Dial(${ARG1},10,tT)
exten => s,2,VoiceMail(u${MACRO_EXTEN}@default )
exten => s,102,VoiceMail(b${MACRO_EXTEN}@default)
[ext-local-custom]
exten => 101,hint,${polycom430}
2006 Feb 23
3
Codec order sent wrong from Asterisk
I'm communicating a softphone (SJPhone) to a Grandstream phone GXP-2000.
The codec order on each one is the next:
SJPhone: GSM - iLBC - PCMA - PCMU
GXP2000: G729 - GSM - PCMA - PCMU
(I have a G729 license, so there's no problem with transcoding G729)
In my sip.conf, I've defined the following codec order:
disallow=all
allow=g729
allow=gsm
allow=g726
allow=alaw
allow=ulaw
And my
2006 Mar 14
1
Bug Help or Suggestion - Grandstream GXP2000 (firmware 1.0.2.8) - BLF, Hints, call-limit
Version - Asterisk SVN-trunk-r12793M (1.2.4)
I have 4 Grandstream GXP 2000 phones configured. However at the moment,
I have had to disable BLF, Hints, and Call Limiting due to an extremely
annoying bug which seems to make the phones channels "lock" in busy
after a call has been hungup.
If I do a show hints after say extension 200 has hung up I get the
following
-= Registered
2007 Apr 02
1
SIP 484 (Early Dial) and International Dialing
I'm building a dialplan for use with a bunch of GXP2000 desk sets. During
testing, we had some user issues surrounding the lack of an on-phone
dialplan. Users would hit 9 and sit there waiting for a redial tone, and
the GXP would time out, sending just '9' to *, which couldn't do much other
than spit back a 404 or play pbx-invalid.
I turned on the "early dial" option
2006 Mar 01
2
GXP-2000 Volume Issue
Is anyone else having an issue with GXP-2000s and transmit gain? All my
other phones are fine on my TDM400P with txgain set at 0, but the GXP-2000
caps at about a third of the scale in ztmonitor. I'm getting people
complaining they can't hear me on my GXP-2000s, whereas my Snom 320 and
Polycom 301 are great, and my Budgetones are overmodulating. Is there any
conceivable fix on the
2006 Apr 28
3
Problems if GXP-2000 phones and Asterisk are not on the same network
Hi,
I have a lot of GXP-2000 phones not registering with Asterisk server.
After two days of attempts, it seems that problem is due to the fact that
phones and server are not on the sme network.
Do you know if this is known issue?
--
Domenico Viggiani
2005 May 12
2
GXP 2000 Conference Button and ILBC
Guys.
I just downloaded the recent firmware for GS GXP 2000 and I must say the
phone works great but... How do you make the conf button work?????? Anybody
done that?
Also, with great dissapointment I must ask, where is ILBC support? GS web
page mentions it and the manual says it supports it almost using bolds :)
soooooo where is it????
Any light on this?
2006 Jun 23
4
GXP-2000 and Shared Line Appearances
I have a client with 20 GXP-2000s. Everything seems to be working
fine. However, after a couple of weeks of use, the client is having a
hard time adjusting to the new IP based phone systems and only misses
one feature from their old Lucent system.
That is, they had 8 analog lines before and all their old Lucent
phones showed a button for each line. So, it was easy for anyone to
say,