similar to: propagate sip reinvites with directrtpsetup=yes

Hi, I want to be able to bridge two sip channels using direct RTP between my endpoints (Audio IP : not local) but without using reinvites. So I set up my asterisk sip endpoints as follows: [test1] type=friend host=dynamic username=test1 dtmfmode=info context=test_rtp allow=all canreinvite=no directrtpsetup=yes [test2] type=friend host=dynamic username=test2 dtmfmode=info context=test_rtp

Hi, I recently installed asterisk, i used sterisk-1.4.20.1, i i set directrtpsetup to yes, no whow would i know if the rtp/media is not passing to asterisk. any tool> or can u just sniff? regards, ron

Hello all. I am currently using Asterisk 11.7.0 (also tried Asterisk 12, but same behavior) and is having an issue when it comes to reINVITE on BYEs. Apparently one of the SIP providers that I am using does not always process reINVITEs correctly, and would return a 500 Internal Server Error message on some (but not all) of these transactions. To get around this issue, I have been using

Hello! I'm facing ReInvites as caller from UAS despite configured session-timers=refuse (which can be seen in the SIP trace) always after 900s. (The behavior is the same if session-timers is set to accept). This just happens with one provider (German Telekom to callee at kabelbw). - The incoming ReInvite is answered immediately by asterisk (Status 100 / Status 200 - 0.02s). Media stream

Hi All, I'm having a really weird can reinvite issue. I've been banging my head around on this for days now.. I have two asterisk servers. One at 172.20.0.11 One at 172.20.2.5 172.20.0.11 is a hosted box and serves multiple offices 172.20.2.5 is a box on site at a customer's office. A phone at 172.20.128.10 makes a call using server 172.20.0.11 to a phone at 172.20.2.80 via server

Hello, I'm wondering if anyone else has been observing problems lately with 1.4.18 and higher releases of asterisk not properly recording calls. When using MixMonitor, the resulting file is only a few bytes long. I think this is because asterisk is doing Native bridging even though MixMonitor should block that. Did something change around the release of 1.4.18 that would have changed

Hi All, We are using asterisk 16.5 and having an issue with the first re-invite after the call has been established. We can see the call gets up and you see in the logs the bridge type has changed and after that a re-invite is triggered. Is there any possibility to deactivate this kind of reInvite? We have some race conditions while have multiple asterisk in the call flow and the different

Hi All, I haven't started sip traces or debug yet, but was wondering what the deal is with the CCM and reinvite, why it doesn't work with Asterisk (using 1.2.9.1). I can make calls back and forth all day with canreinvite=no, when I try to reinvite an inbound sip call from the CCM with Asterisk server 1 to Asterisk Server 2, I get one-way audio issues. All the RTP ports are configured

Hi, I just ran into what seems to be an issue on re-invites. I'm not sure if it's a bug or as designed, so I thought I'd ask the question. Here's my setup: - Asterisk 1.8.13.0 - Phone A: Polycom ip331, only allowed to use ulaw, canreinvite=yes - Phone B: Polycom ip330, only allowed to use alaw, canreinvite=yes Phone A calls the extension of phone B. After the normal call setup

Hi all, So the scenario is: A -> Asterisk -> B after B send back 200 OK Asterisk is answering the call to A. Directly after the Answer Asterisk generates a ReInvite to A and the only difference between the 200 OK sdp and the reInvite sdp are the offered codecs which are forwarded from B to A. Here i do not understand why this could not be done in the 200OK to A? As far as i understood

Hi My call flow is T38 static IP gateway --> Asterisk --> Sip Provider--> PSTN Call is placed in reverse direction - from PSTN to T38 Gateway. T38 GW reinvites with T38, and asterisk passes it along to the SIP provider. The SIP provider challenges it and asterisk reponds to the Challenge with INVITE with Auth credentials...however, the Asterisk changes the SDP and replaces the T38

Hi all, My Asterisk server is working fine, although every time that in the middle of any call there is a reinvite, the user hears a glitch. Why is this happening? How can I solve this problem? Thanks in advance, Ricardo Carvalho.

I must be doing something incorrectly, or something is wrong with ATA-186 reINVITEs in SIP. Perhaps someone more enlightened than me can lend me a hand. I have been attempting to get two SIP phones to reINVITE to each other, and I've been unable to think of or uncover the correct method. The calls always go through the Asterisk server, no matter what I try. I've simplified things

Hello, I know there's a problem with Asterisk at the moment in that while it's easy for one caller to dial another (using the dial command), it's tricky to connect two calls that are already in progress. I've been using MeetMe to achieve this (with each caller's call being directed to a dynamically created conference room programatically), and this is working - kind of -

Please help. Asterisk 1: Sip.conf [VoipDirect777821] type=friend host=dfvvd.dyndns.org username=VoipDirect777821 secret=xxxxxxxxxxxx accountcode=5260477782 amaflags=billing context=Incoming disallow=all allow=g729 ;allow=alaw ;allow=ulaw trunk=no qualify=yes qualifysmoothing=yes nat=no canreinvite=yes dtmfmode=rfc2833 ;directrtpsetup=no t38pt_udptl = yes Asterisk 2 sip.conf GNU nano 1.3.12

Hello, I think I met a case similar to the one solved by [1] . Quoting this case : * res_pjsip: Handle deferred SDP hold/unhold properly. Some SIP devices indicate hold/unhold using deferred SDP reinvites. In other words, they provide no SDP in the reinvite. A typical transaction that starts hold might look something like this: * Device sends reinvite with no SDP * Asterisk

I've an Asterisk server running in my office, which forwards all long distance calls to a third party SIP service using an extension rule: exten => _1XX0.,1,Dial(SIP/{EXTEN:4}@external_sip_server.com) (1XX0 is the international calls rule for Chile) Also, in my sip.conf, I've defined canreinvite=yes to decrease the network load to the server caused by the RTP. However, the external

Hey guys, I've been having a very odd problem that happens intermittently. I've had this happen with only a couple of providers and somewhat rarely but its to the point now that we need to fix it to be able to do business. The scenario is as follows: We have a DID provider that routes calls to our asterisk boxes and we have an outbound provider to whom we send the calls of the person

I am not proxying the media, but never the less I am forced to store the source media IP in my CDR, for regulatory reasons. Asterisk gets that information when the reinvite comes, but how do I store it? If I don't figure this out my next email will be from Federal Prison. Kindly help me stay away from those guys. Eventually we all need to save that information or we shall not be able to stay

I'm using Asterisk (1.2.14, RedHat 9) but I've been having trouble with SIP re-invites. I have a DiD from an ITSP and when someone calls in, Asterisk plays a menu recording and transfers the call to the external line the caller selects. Since both sides of the call are external, I want to use re-invite to avoid the rtp packets from going through my server after the call is bridged. I