similar to: digits in chan_dahdi

Hi, After some testing I've found out that my client's hardware recognizes DTMF only if digits are sent 50ms apart with 50ms of tone duration. This was tested using a test device which generates DTMF. Now asterisk doesn't do it by default because digits going out from Asterisk are not being recognized. Using command sendDTMF, I can control inter-digit duration, and using

My outgoing FXO calls are answered but have no audio in either direction if I have callprogress=no in chan_dahdi.conf. If I change to callprogress=yes then the audio returns. My chan_dahdi.conf file is listed below. Can anyone point-out why callprogress=no isn't working? #cat /tmp/a [trunkgroups] [channels] language=en context=incoming toneduration=40 ;usedistinctiveringdetection=yes

Hi, I am using asterisknow 1.5.0 and Wildcard TDM410P card. Everything is working fine except the caller ID of incoming call from PSTN line. The phone display is showing "Unknown" when there is an incoming call. I think the same problem listed here: https://issues.asterisk.org/view.php?id=6683 There is one patch on this link but i don't know how to apply patch on asterisknow.

Hi, We are running 1.4.22 and have been experiencing problems with certain IVRs and DTMF Tone duration. We would like to be able to increase DTMF Tone duration by 50 to 100ms over what the user is pressing on his phone. We have a PRI test circuit and an analyer in between to measure tone duration. We have tried setting chan_dahdi.conf parameter 'toneduration', but that does not do

Hi All; I am using Background in my configuration, and I noticed the following so if any can help: 1) If I pressed 1 twice (11), so it runs the step related to first 1 and then it runs the step related to second 1, so it does buffering for my input and run two steps, how can I make it run only the step related to first entered digit "1" and does not do buffering (so ignoring the second

I have a trixbox 2.2 and Nortel santral that are speak each other. I use digium TDM100M 2 fxs-2fxo. After I made yum update I had met with some problems when I want to make any call from extension of trixbox to extension of nortel. When I attend to log (/var/log/messages) I meet with these messages as you see below. When I try to make any call from trixbox extension the call seems established but

I just had a user report that they called out to someone on a cell phone this morning, and after a short conversation, the call was dropped/lost. The person on the cell phone says that this is very rare, and would not suspect the dropped/lost call to be on their side. I have looked at the asterisk/full log as thoroughly as I can, and have pasted the lines which seem relevant to that call below.

Hi, We have a PRI Trunk (physical E1) and we are getting some rather weird and very isolocated problems. On outbound calls to specific numbers, it would seem to me that DTMF from the remote side is affecting the local asterisk system. Basically what happens: - We make a OUTBOUND call via the PSTN (PRI Trunk) to a remote System - Remote Answers, and converse - Remote sends DTMF on their site to

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

Hello List, I am having a strange issue with a trixbox system we installed for a client, and I would appreciate any help on this one. The issue is that occasionally when they go to answer an inbound call from the Sangoma A200 - there is no one there, and they are presented with dial tone. The calling party is hung up. A bit of background: The client actually has two systems install (one at

On Wed, Jun 16, 2010 at 4:35 PM, Shina Owolabi <shinacalypse at gmail.com>wrote: > Hi! > I've installed Asterisk 1.4.32 with freepbx-2.6.0 in an attempt to provide > a conference bridge for an existing Avaya PBX. I have no control over the > Avaya system, but I am able to speak with the admin in charge when I need > stuff done. I am running all this in a VirtualBox

Does the application PGSQL has been removed from Asterisk? Couldn't find it on Asterisk source and addons. Atenciosamente, Vin?cius Fontes Gerente de Seguran?a da Informa??o Canall Tecnologia em Comunica??es Passo Fundo - RS - Brasil +55 54 2104-7000 Information Security Manager Canall Tecnologia em Comunica??es Passo Fundo - RS - Brazil +55 54 2104-7000

The Asterisk Development Team would like to announce the release of asterisk-18.20.0. The release artifacts are available for immediate download at https://github.com/asterisk/asterisk/releases/tag/18.20.0 and https://downloads.asterisk.org/pub/telephony/asterisk This release resolves issues reported by the community and would have not been possible without your participation. Thank You!

The Asterisk Development Team would like to announce the release of asterisk-18.20.0. The release artifacts are available for immediate download at https://github.com/asterisk/asterisk/releases/tag/18.20.0 and https://downloads.asterisk.org/pub/telephony/asterisk This release resolves issues reported by the community and would have not been possible without your participation. Thank You!

The Asterisk Development Team would like to announce the release of asterisk-20.5.0. The release artifacts are available for immediate download at https://github.com/asterisk/asterisk/releases/tag/20.5.0 and https://downloads.asterisk.org/pub/telephony/asterisk This release resolves issues reported by the community and would have not been possible without your participation. Thank You!

The Asterisk Development Team would like to announce the release of asterisk-20.5.0. The release artifacts are available for immediate download at https://github.com/asterisk/asterisk/releases/tag/20.5.0 and https://downloads.asterisk.org/pub/telephony/asterisk This release resolves issues reported by the community and would have not been possible without your participation. Thank You!

2023-11-08 18:14:13] ERROR[571246][C-000017e2] : Got 19 backtrace records # 0: [0x5bd18a] asterisk utils.c:2800 __ast_assert_failed() # 1: [0x4618e3] asterisk astobj2.c:589 __ao2_ref() # 2: [0x58e660] asterisk stasis_cache.c:824 update_create() # 3: [0x58efed] asterisk stasis_cache.c:903 caching_topic_exec() # 4: [0x586b90] asterisk stasis.c:1380 dispatch_message() # 5: [inlined] asterisk

Quick and dirty question: for the TDM410P I must use the wctdm24xxp driver? Att Vin?cius Fontes Desenvolvimento Canall Tecnologia em Comunica??es Ltda.

Hello everyone. I got a little problem in here: I want to set up a queue so that if anything of these happens: a) No agents logged in b) All agents busy Then the user gets diverted somewhere. I used this (for testing purposes only, of course): exten => 7080,1,Answer() exten => 7080,n,Queue(teste) exten => 7080,n,Goto(${QUEUESTATUS}) exten => 7080,n(ERROR),NoOp(${QUEUESTATUS}) exten

I am trying to help a guy out with his Atcom IP04. He has set it up like this. He has a handful of IP phones all connecting via SIP. He has two phone lines connected to the FXO ports one from telecom, another from vodaphone. He has set up the dialplan so that one of the trunks fails over to the other trunk. Everything seems to be working OK except for outgoing calls. He can call from