similar to: random hangups on RBS T1

Upgrading an ancient customer installation... was running 1.4.23.1 (Trixbox) with Zaptel 1.4.12.9 and a Sangoma A102D, which has been running fine for 5+ years. Customer getting anxious about hardware failure, so we built a new box and installed 1.8.24.0, Dahdi 2.7.0.1, and a new Sangoma A104D. The single active span is an RBS T1 B8ZS/ESF/E&M Wink. I tried to move one span over one

Howdy, New installation, trying to connect an RBS T1 with AMI/D4 framing and E&M Wink. Using a Sangoma A102d and asterisk 1.4.22-2 on Centos5 (Trixbox 2.6.2.1). Outbound calls work fine, but inbound calls fail to read the DID information, and with debug set to 10 I get the following: [Feb 2 19:40:23] DEBUG[25184] chan_zap.c: Monitor doohicky got event Wink/Flash on channel 3 [Feb 2

asterisk 1.4.35 dahdi 2.3.0.1+2.3.0 one span on a 4port T1 card Got complaints this morning that outbound and inbound calls were "scratchy" and I made a few test calls. It kind of sounds like the gain is too high somewhere, and the audio is overdriven. Is this a problem at the carrier? I'm trying to call them now, but it's Sunday morning in the sticks, and my chances of

Howdy, Just installed a new switch in a new location (Ubuntu, 2.6.24-24 kernel, zaptel 1.4.12.1 built from source, libpri-1.4.10.1 built from source, asterisk 1.4.26 built from source, wanpipe 3.5.4 built from source, Sangoma A104d with firmware that is probably a year old). I plugged in an RBS T1, ESF, B8ZS, wink start, and MF signalling. I stuck with the defaults that the wanpipe build

Has anyone here used T1s with RBS with asterisk? Cary Fitch

We have upgraded a box from 6.2 to 6.3-RELEASE. Afterwards the box does not recognize its ST Lab I-160 serial card with Netmos 9845 Chipset. It worked flawlessly on 6.2 with puc(4) driver. >From dmesg: pci1: <simple comms, UART> at device 8.0 (no driver attached) ~# pciconf -l -v | grep -B 4 UART none2@pci1:8:0: class=0x070002 card=0x00041000 chip=0x98459710 rev=0x01 hdr=0x00

Hey Rugby Lovers!! Enjoy to watch Italy vs England live stream U20 Six Nations 2012 Game online rugby Exciting match with your Favorite TV channel. Stream coverage Rugby League online TV, Live Rugby games watch on skysports TV, bet with sky bet, betfair TV, ESPN TV, fox sports TV, internet TV. You get links from the site — Just click the link. Enjoy Rugby live broadcast, live sopcast, live

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! I'm test CentOS in this moment, before used White Box and I had the same problem when I change from normal user to postgres: [puc at carcel ]$ su - postgres Password: free(): invalid pointer 0x7ed1d0! free(): invalid pointer 0x9af7930! Segmentation fault [puc at carcel ]$ I'm using LDAP, but user "puc" is a local user, if I

I am connecting to a siemens hipath 4000 with dahdi 2.1.0.4 and asterisk 1.4.23 using a Te210P card. the phone guy is saying that the lines are reporting always BUSY. however on my end the status shows OK. Anyone seen this? Is there something different about connecting PRI to siemens hipath? system.conf shows: loadzone=us defaultzone=us span=1,1,6,esf,b8zs bchan=1-5 dchan=24

Ok, I'm about to take the plunge, and am trying to decide between Channelized T1 E&M and PRI. I'm getting an "Integrated T1" which will have data and voice capability, all plugged directly into my digium single T1 card. In either case the data piece looks pretty straighforward, just setup the channel properly, hand it off to the linux hdlc layer, and route away.... the

Hello, I'm trying to make my asterisk box to act as a telco, in order to reproduce a US environment in europe. Our telco provider is giving us those settings: ESF B8ZF Inbound = E&M Immediate Outbound sig =Wink Start Yield to Glare = Yes Those trunks are using CAS for signaling. I have tried many configs/combinations in zaptel.conf and zapata-channels.conf In zaptel.conf, when having

Hi all, as good? I try to install asterisk-1.2.14, zaptel-1.2.12,libpri-1.2.4,addons-1.2.5 , sounds-1.2.1 and wanpipe-2.3.4-3 and hwec-utils-beta4-2.3.4 But it is not compiling drivers of the Sangoma, why udev's for board in "/dev/zap"(1-31, channel,ctl,pseudo,timer) is not created. But when I install a board TE110P Digium, udev's is created and asterisk functions perfectly. : )

I need to change the code of Garch to the FCGARCH (a non-linear multi-regime GARCH). I don't know nothing about R. I'd like to know how can I get the code of the garch in order to change it and make the fit for the FC-GARCH. Any non-linear code will be helpfull because if doesn't help in the programming it helps in getting familiar with R. Thank you Renato -- PhD Student Renato

Hi, I encoded file in a ipaq 1940, pocket pc 2003, processor Samsung s3c241(similar to ARM), 266 Mhz. I would like to know your opinion for the quality output if this is right to entered parameters. File original: http://padawan.ing.puc.cl/chavezorig.wav File encoded: http://padawan.ing.puc.cl/chavezq1.wav The parameters for encoded are: state = speex_encoder_init(&speex_nb_mode); int tmp=0;

I am trying to read a csv file using the code; contol <- read.csv("RBS.csv") This is the error message I got; Error in file(file, "r") : unable to open connection In addition: Warning message: In file(file, "r") : cannot open file 'RBS.csv', reason 'No such file or directory' Where was the mistake? -- OYEYEMI, Gafar Matanmi (Ph.D) Senior

Hi, To solve echo problems, I'm considering 2 alternatives. 1> Sangoma A104d - I can't find support for asterisk 1.2.1 2> Desktop echo canceller - http://www.oriontelecom.com/echo_canceller/desktop/e1_ec_desktop.html - I want to know where to buy and price. Any suggestion is appreciated. Thanks. Jason. p.s. : asterisk cli command "reload" can change rx_gain and

Hi, For some time now I have noticed that our RBS T1 (asterisk 1.4.35, Dahdi 2.3.0+2.3.0, TE410P) often has channels stuck in the state "Ringing", like this poor chap who got stuck on two calls in a row, apparently: [excerpt from "core show channels"] SIP/7157997-0000534b 7760308 at business:1 Ring Dial(Dahdi/g0/7760308) DAHDI/3-1 5130262 at from-pstn:1

I need your help I have a sangoma A104D on my dell server; I got card status ok with no alarm If I dialed the extension 6210006, it shows the output as stated below, but there is no ringing from the pstn number nor the iax softphone am using on my pc. I will be glad if someone can give me a working config? What I want to achieve is to send all my call to the pstn on A104D? The pstn am

I'm going to need to build a few Asterisk boxes that have dual and quad T1 interfaces. I knew Digium made T1 interface cards and on this list I heard about Sangoma so I did a quick search and found the hardware page at voip-info.org which lists several manufactures I didn't know about. All that leads to this question: I'll be using T1s in the USA. What experiences have you all had

Hi All, I am from the packaging team in RBS. We use R DCOMServer Manager 2.0, this application uses RGUI 2.3.0 as one of its components. We are planning to upgrade to the latest version of RGUI 2.8.0 but found that R DCOMServer manager is not compatible with the latest version. Can you direct me from where can I download the compatible version of DCON server Manager? Thanks, Smita Kumar RBS