similar to: externip/localnet

Hi all, I've tried search this problem on the list... no luck... The case is: without externip/localnet config on sip.conf [general] my SIP trunk works, but with no audio NAT problem (asterisk sends the private 192 address to the outside...) when I configure externip/localnet correctly my SIP trunk simply disappear! Checking the signalling with tcpdump shows me that Im sending the

Hi, We have some Asterisk servers that we are moving behind a NAT to preserve public addresses and make room for growth. This is Asterisk 1.4 NAT works very good with the externip/localnet-setting when we are connected directly to our teleco. But when I try to use NAT and put them behind our Kamailio something interesting happens: The media-address in the SDP is the internal ip and not the

Hi all! Do anybody has a full working environment using externip on an asterisk box behind a nat? I tried with two diferent boxes (Elastix-1.4.24 e Trixbox-1.4.22-3)and the asterisk do not replace neither contact, neither sdp headers info with the externip informed on sip.conf general parameters. I used these two statements: externip=XXX.XXX.XXX.XXX localnet=192.168.200.0/255.255.255.0 Do

ekiga registration fails. I've set nat = yes ( also blank ) and i've set externip. Anybody have a sip.conf that works? Here's the sip debug: Reliably Transmitting (NAT) to 86.64.162.35:5060: REGISTER sip:ekiga.net SIP/2.0 Via: SIP/2.0/UDP 10.10.11.180:5060;branch=z9hG4bK17818198;rport Max-Forwards: 70 From: <sip:test at ekiga.net>;tag=as64618445 To: <sip:test at

Hello, I have setup a samba server at my office as a PDC it stores the profiles on the server fine. I can access the profiles from any computer in the office just fine. My problem is that I work from home 4 days a week and need to access my work profile. I currently VPN into the office network via freeswan. I can log into the the domain from the vpn'd connection and I can access the samba

I am having difficulty configuring SIP behind NAT (using latest CVS). Using sip.conf: [general] port=5060 ; Port to bind to externip=ww.xx.yy.zz bindaddr=0.0.0.0 nat=yes register=>[userid]:[password]@voiptalk.org/2000 [voiptalk.org] nat=yes externip=ww.xx.yy.zz type=friend secret=[password] nat=yes reinvite=no canreinvite=no I fail to register. SIP Debug gives: SIP

Hi list I am having trouble getting asterisk to perceive the firewall's ip address as outside localnet (setting in sip.conf). The situation is this: - phones inside lan work fine when localnet is set to 192.168.0.0/255.255.255.0 - phones outside the lan can't ack the invite from asterisk because asterisk perceives the outside phone to originate from localnet as DNAT is done with iptables

I have an Asterisk 1.4.19.1 server that is behind a Fortinet firewall. Localnet is 192.168.2.0/255.255.255.0 and all external sip devices look as if they are on the same local network because the Fortinet rewrites the incoming IP as its own address. The problem I have is that when I set "externip=148.XXX.XXX.XXX" it is being ignored and I can see SDP packets that have the internal

I've been trying to get this to work for a few days now. I read that domain requests are sent via broadcast, and to use WINS to get around it. Well, I've enabled the WINS server on my Samba PDC, and told the BDC's on each VPN segment that the PDC is a WINS server. WINS resolution works apparently, I can sit on a VPN'd network segment and ping machines across the VPN via their

Will this do the intended thing? This is in sip_nat.conf which is included in sip.conf: externip=192.168.0.200 localnet=192.168.0.200/255.255.255.0 externip=64.168.237.110 localnet=192.168.1.2/255.255.255.0 I have Asterisk running on a box with two Ethernet interfaces and bound to both. One interface, 192.168.1.2 services clients outside the firewall who are led to believe that Asterisk is

I am experiencing a "606 not Acceptable" error trying to set up an Asterisk server as an ekiga.net client. My server is behind a firewall with NAT routing. I have googled this problem and read about Asterisk feeding its local ip address to ekiga.net. That seems to be my problem. I tried putting stunaddr=stun.ekiga.net into the sip.conf file under [ekiga]. I also tried

Thanks for the info so far. I am still trying to asterisk'ize my ML9.2 firewall box and can't get the external SIP registration to work. If I hook up my Sipura directly to the WAN it registers OK. This is the message I get from asterisk: Mar 8 21:03:07 NOTICE[196621]: chan_sip.c:3140 sip_reg_timeout: Registration for '263872@192.246.69.223' timed out, trying again If tried

Hi there, I am trying to setup a configuration that requires me to use SIP and asterisk behind a firewall and over a VPN to a remote office and with some local Phones also. I can't use IAX to my provider because they don't offer it and my handsets ( snom 300 ) also don't support IAX so it's all SIP. The configuration is a follows Asterisk PBX 10.202.17.217/24 ------>|

Dears; It seems my service provider is requesting a complicated settings to allow me to send from behind NAT. What they said: "It shouldn't matter as long as you are handling the NAT correctly your end. We do not fix NAT so if you're sending internal addresses in your INVITEs or SDP then things will fail but if you're handling it correctly, we shouldn't tell the

Hi everybody, I finally want to get rid of 1-way audio problem. Please help me here. I have 3 scenarios. 1. Audio is always one way. Caller who dialed can't listen the called party but called party can listen him. In this scenatio Asterisk is on dynamic IP with dyndns FQDN. sip.conf has externip = abc.dyndns.org and localnet = xxx.xxx.xxx.xxx entry. Trunk and extensions are SIP. Where is

Hi, I'm using an Asterisk 1.2.18 box with a remote Snom 360. My Snom always rings but sometimes (it happens randomly!) no voice is passing thru (2 ways). Asterisk CLI shows this warning: Jan 10 10:03:26 WARNING[19164] chan_sip.c: Forbidden - wrong password on authentication for INVITE to '"unknown" <sip:unknown at xxx.xxx.xxx.xxx> I have already set localnet and

On Thu, Mar 9, 2023 at 9:42 PM Jerry Geis <jerry.geis at gmail.com> wrote: > I have a SIP trunk - calls going out work fine. > > Trying to setup an incoming call with a DNIS > > When I dial the number - I see nothing on the CLI. > The person says the server is returning 401 > > How do I debug that. Using asterisk 18.8.0 > > Thanks > > Jerry > Thanks I

Hi All; I was using since one year Asterisk 1.4.19.2 and zaptel 1.4.10.1 and they were working fine via SIP, IAX and Digium fxo and fxs ports. Suddenly just before 2 or 3 days, the voice become garbage like robot when I place a call from the SIP Phone (which is in a country and the Asterisk box in another country). I am surprise what is the reason that let rtp become like this ! The sound now

Hi, I can't receive/send calls with Asterisk. Could someone please give me a few pointers on my configuration? Regards, Norman Zhang ; sip.conf [general] disallow=all allow=ulaw port=5060 bindaddr=0.0.0.0 externip=x.x.x.x localnet=192.168.22.0 mask=255.255.255.0 context=inbound-sip maxexpirey=180 defaultexpirey=160 tos=reliability srvlookup=yes register =>

On Fri, Mar 10, 2023 at 9:49 AM Jerry Geis <jerry.geis at gmail.com> wrote: > > > On Thu, Mar 9, 2023 at 9:42 PM Jerry Geis <jerry.geis at gmail.com> wrote: > >> I have a SIP trunk - calls going out work fine. >> >> Trying to setup an incoming call with a DNIS >> >> When I dial the number - I see nothing on the CLI. >> The person says