similar to: Rotary phone on Asterisk

I'm trying to install both a Sangnoma A102 (with echo cancellation) card and a Digium 8 port analog card with echo cancellation (Digium AEX800E) in the same server. I know I probably shouldn't have mixed vendors - lesson learned for next time. That said, I have everything working fine...except Native Bridging between the Sangnoma and Digium cards. When I do native bridging, I get a very

Folks, I've got one of those GPO 1950's rotary dial phones that I'm trying to get working in the UK. I've got pretty much everything working with my TDM400, the phone rings and I can receive calls but I cannot dial with the rotary dialer. I have set pulsedial=true or whatever the exact setting is and I can dial from the phone by lifting the receiver and tapping out the number on

Will the FXS cards that work with asterisk handle rotary? Are there any channel banks that can convert rotary to touch tone (like some sorta bridge)? The goal is to be able to log input from rotary phones. Full PBX functionality would be nice but... (It's for a project, not for serious production). -- // Ethan O'Toole //

Ok... I am not a telephone guy... I was born after rotary phones, so forgive my ignorance in this matter. I am trying to get a really old rotary phone up and running with an ATA. Why? Who knows... just thought it would be cool. The problem is that it does not have an RJ11 connector, instead it has three wires (green,yellow,red). Does anyone know what that type of connector is called? Or

Looking to install asterisk for a client and was shopping around for prices for 6 POTS lines with or an integrated T1 with voice and data. I called up Sprint and I told the sales rep that there was going to be a Phone system she said that they would have to install "key" rotary lines and then I told the rep that I needed two more lines with hunt group and she told me that would be

Hello, I had two quad-E1 Tormenta2 cards in my system and yesterday i had to replace the CPU. I noticed the rotary switch on each card that sets the card number or ID... Both switches were set up on 0 and everything worked fine. Should i set one card to 0 and the other one to 1, or... "if it works, don't fix it!" ? I had some nightmares with IDs on Dialogic hardware with Bayonne

Only 100? We had a single server over 300. From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Zeeshan Zakaria Sent: Saturday, October 30, 2010 9:49 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Under heavy attack My count has reached 100 for the day. The server serves doesn't serve

On Tue, 2005-01-18 at 09:49 -0600, asterisk-dev-request@lists.digium.com wrote: > > Hi, > > I am Arnaud F?vrier, I teach in a technical university in Marseille. > > I'd like to know if is is possible to connect a very old phone to > asterisk and dial pulses with it? > > Are digium cards pulse dial compatible? > > Is there any specific configuration

Hi, Long story short - I have an ancient Britsh Telecom phone attached to my Asterisk PBX via Dahdi. It works beautifully, receiving calls, and the call quality is excellent. However, dialling out is impossible, as Asterisk consistently mis-reads the number of pulses the dial sends (it could be a squiffy dial, I'm not sure). Not to mention the fact that, in today's modern "want

Folks, I have a TDM400 with an FXS module. I'm having some trouble ringing some phones attached to the device. I have a real el cheapo handset that cost me about 9UKP. It works fine, I plug it into the Wildcard and call the channel and it rings. I have tried plugging in my BT Diverse 3016 cordless phone but it will not ring, although I can call out from it. I have also tried my GPO 332L

Hi. Does anyone know about a simple one-fxs ATA with pulse dialing support that can work with Asterisk? A SIP one would be ok. I've been told that the Digium S101i IAXy does support pulse dialing; although it's a iax2-only ata it could be enough. I need a bunch of them to convert some old fashioned rotary phones into VoIP ones (I'd like to disassemble the ATAs to remove the boards

I've noticed that some callers listen to our main menu and don't press any keys. I have it set up to restart the menu a few times and eventually hang up. I'm wondering if these are wrong numbers (in that case, why don't they hang up) or they really want to speak to someone here but don't understand the menu (what's so hard about "for the operator, press

I've been replacing an old Toshiba DK switch with an Asterisk solution. I'm needing a solution for fax machines that works as well as a POTS line from my carrier. If the POTS line is the solution, I'll keep it, but I'd rather move away from that. Here's what I'm thinking...will it work? I would use a dual-port Digium T1 card. In one port, I'd terminate a telco PRI

Hi, I am just trying to figure out how to setup a TDM04B card for incoming/outgoing calls. I have 4 lines, which are provided as a rotary trunk group, currently hooked into a Nortel system, which asterisk will replace. I have setup a Dell 1800 (Tower) system with the TDM04B card, which seems to work. The question is how do I set it up that all 4 lines are part of a trunk group, such that

Dear all: Does anybody know about label conflicts between xtable and Hmisc? I found a couple of e-mails similar to this problem but is not clear to me how to get around the label problem. The first table(longtable below) is generated with the latex function from Hmisc but for some reason when I try to hyperlink to it,it takes me to the top of the document. The second table created with the xtable

To all Asterisk guru's... Here is my question. 1. Asterisk PBX - 5 Trunks / Incoming lines 2. 1 Building - 3 Companies (sharing phone system) Ok that's the basic layout. Here's the low down - Each company will have one dedicated channel for there company. The other 2 channels they want to be set aside as rollover's (rotary). That is not an issue. Where my concern is, how

We need to monitorate the E1 with nagios, somebody did this? any ideia? Thanks in advance! -- Atenciosamente, ------------------------------------------------------- Dario Quiroz (71) 9275-9080 gtalk: darioquiroz at gmail.com ------------------------------------------------------- -------------- next part -------------- An HTML attachment was

I've been running Asterisk for months with no problems. I have grown to the point where I need an aditional TE cards. After many attempts I was able to add the second card without affecting the performance of the first. However, the second card is not working properly. Setup ===== - Running on a Dell Server. - RedHat 8 - Asterisk 1.0 - I have two TE410Ps on that box, card 0 assigned to

Hi, If I have a PRI with all channels grouped in group=1, I understand when I want to make an outgoing call that asterisk takes the first channel available. Is there any possiblity to "rotate" the channel taken? I was searching in Wiki but I could not find nothing about. Thanks, Alejandro

Thanks for your suggestion. I have compiled according to http://www.voip-info.org/wiki/index.php?page=Asterisk+zaptel+pulse +dialing dialing at 10 pps works fine with Asterisk with the newly compiled wctdm. but when I dial at 20 pps, the pulses cannot be decoded correctly. I tried changing the make/break ratio but dialing at 20 pps still has the decoding problem. Does anyone have any