similar to: asterisk 1.6 and BLF

Hi, Is anyone aware of a SIP hardphone with Busy Lamp Fields supporting 2 colors (or more) ? This could be very useful to support extended presence, for instance. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090519/0b8f1b62/attachment.htm

Hi, I'm banging my head over this. Usually, I'm using a SIP hardphone feature called "Call Pickup Starcode" to enhance BLF with Directed Call Pickup : basically, SIP hardphone (here a Thomson ST2030S) is configured to send an INVITE message whenever a BLF is pressed while blinking. The INVITE is build with the extension number (attached to the BLF that was blinking and pressed)

Hello, I am having some troubles with Snom phones and maybe someone can help me. Let me say this: BLF and pickup works great with Polycomes and Grandstream etc... So I think my problem might not be Asterisk related but I am not 100% sure. The snom phones subscribe to my extensions (hint priority) as expected. The light blinks (ringing) or is turned on (in the call) as expected. My problem is to

Hi all, I'm using 1.2.9.1, with the "metermaid" patches to show parking spot status on Snom BLF lights. I see from http://www.asterisk.org/node/97 that the metermaid code has changed substantially since 1.2.9.1. Is anyone successfully using the "new" metermaid functionality in 1.4.x? I'd like to hear any good/bad experiences before I attempt even a test

Hi, 1. You can now find several SIP harphones with bicolor BLFs (see Polycom, Cisco, ...). Is there a protocol which best describes how to use this bicolor BLD feature ? 2. I would like to map these BLFs to the following user activities : - user is logged off: no light - user is logged in: green light - phone is ringing: blinking light - user is on call: red light It seems that

Hi, Latest SIP firmware for Polycom 601 is 3.1.6. With this, is Directed Pickup supported ? At the moment, when an extension is ringing, I can see BLF turning to solid Red but I can't see it turning to Blinking Red. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I have BLF working on Snom phones. Ringing state (blinking) or "on the phone" state (solid) are working well. So the buttons are configured as "BLF" in the Snom webinterface. Now I would like to add another state for unavailable or dnd. In fact I would like to turn the LED red in the case the phone is not registered or the user pushed the DND button. So I though

Hi, This is a weird request, but does anyone have a Snom 360 monitoring extensions for BLF on several Asterisk servers accross a network? Alternatively, can anyone give me a pointer as to how to setup a Snom 360 to monitor an extension not on it's own server? My scenario is that I have a main site which will have its own server (for storage of call recording data etc because the remote

Would anyone happen to have some examples of polycom configs, specifically the 650 with sidecar for blf. I have the asterisk side all configured since I've set up blf with other types of phones, but I'm missing the polycom side. I've put together a <mac>-directory.xml, and the sidecar now lists numbers as speed dials but does not subscribe to blf.

Hello list, Can I do something like this for BLF functionality : [test-blf] exten => _XX,hint,Macro(GetSIPaccount,${EXTEN}) exten => _XX,hint,SIP/${SIPACCOUNT} GetSIPaccount is a macro that looks at a MySQL-database for the realtime table sip_buddies where the SIPusername is taken from. It works great for internal calls... but how about BLF-functionality ?? Feedback is appreciated !

Hello, I have some trouble with the BLF indicator. I have two phones that use the same hint: 13 => hint,1,SIP/phone13&SIP/phone13-wlan This works great from the asterisk side, but it seems the status change is too quick for the attached Grandstream-phones. When I ring the extension the hint changes to "Ringing". The Grandstream blinks. Great. Now, when someone picks up one of

Hi, I'm having a problem getting a snom 300 to work with BLF (extension 222). I've set it to watch extension 220 in the function key config pages as per the wiki (BLF, <sip:220 at server.com>) but I can't get the light to come on when 220 is ringing. The SIP trace page doesn't show anything coming from my PBX when 220 is ringing or in use. Any help much appreciated as this

I am running 1.8.3 and my BLF lights have stopped working. The hints appear to be intact when I use core show hints. But none of the phones are getting the BLF updates. This has happend in the past and I have had to restart my server. What could be causing this to occur. It did not do this with the 1.6.x builds. Is there a way to reload the hints or force a refresh without re-starting

Hello, is there some way to make Asterisk light up a certain light on an IP-phone ? Like MWI, the message waiting indicator can light up if there is voicemail. Could this light, or even other lights (like BLF-buttons) be used to give a visual notification to the user ? For example : if a certain value is set in the Mysql-DB and Asterisk reads out this value, can Asterisk react upon it inside

I have a 536i expansion module attached to a 57i-CT. The BLF lights on the 536i will light up and work fine for a while... however after a bit they seem to loose their ability to see if someone is on a phone. They still work to dial, if I try to dial, however, they don't light up when someone makes a call, or if their phone rings. If I reboot the phone, the lights start working again

Hi, I used Grandstream (gxp2000, gxp2020) and Snom (370) SIP Phones, but with 2 extensions BLF status does not work correctly. have someone ever tested a Sip Phone with more then 60 BLF without problems? Can someone suggest me model and brand? Thanks, bye. -------------- next part -------------- An HTML attachment was scrubbed... URL:

It has been may years since I've done anything with a dahdi fxo; much has changed in the interim and I havne't found answers googling. The fxo hw is installed on the pots line in parallel to existing pots phones. My goal is to have a blf on the sip phone which lights whenever any of the devices on the pots line are off hook and which, when pressed, INVITEs the asterisk box such that it

Hi, I need to make use of BLF feature on Aastra 6757i phones but its an Asterisk 1.4 using realtime architecture. Extensions are defined in realtime database and dial plan is in AEL. I am able to correctly setup hints in the dialplan, but they don't work. Did some research and found out that hints don't work work with realtime extensions. Is there any work around? On voip-info I read

Hi! I have the following questions/problems with * 1.4. We have several Snom phones (320 and 360). Hints are configured in extensions.conf (core show hints shows the correct values). My Snom phone is registered to some numbers (validated by using sip show subscriptions). I see the lights blinking if someone calls the subscribed number and steady lights if the call is established. So far, so

We have an issue where Polycom's lose BLF functionality after a reboot. The only way to fix it is to reboot the Polycoms. Anyone else have this issue? We are using 1.4.18. If I run 'sip show subscriptions' all the subscriptions come back after the restart but the lights on the phones do not work. Any help would be appreciated. -Thermal -------------- next part -------------- An