similar to: sip show channels

I have a high volume asterisk 1.40 installation and I ran a SIP SHOW CHANNELS. (see partial output below). My questions are: 1. "wc-l" of the output shows 4000 lines. Does this mean 2000 active calls? (2 channels per call) 2. The latter part of the output shows "unkn" for Form column. Why does it not know the codec? Could it be UDPTL? Or are these calls messed up? 3.

Hi, I am using Trxibox 2.6 latest ISO install. Following is the output of : "sip show channels" [trixbox ~]# /usr/sbin/asterisk -rx "sip show channels" Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message 212.53.40.40 0218245 6cfb845d050 09011/00000 0x0 (nothing) No 192.168.1.116 (None) YTc4ZmM3NjV 00101/00006 0x0

Hello everyone, I'm getting DIALSTATUS=CHANUNAVAIL when a call is trying to get one of my queue interfaces, despite the fact it is free at that time, can you give help? 1. I see many sip channels from that extension: [root at mysweetpbx]# asterisk -rx "*sip show channels*" |grep 648 Peer User/ANR Call ID Seq (Tx/Rx) Format Hold

Hello all I've discovered that SIP channels sometimes get stuck in *. I've read some posts from Fri 29 Aug 2003 which mentions this issue, but there doesn't seem to be any final answers I don't know if this is related to the 0001604 bug? Below is a list from one of the incidents: I know the (d) means that it is scheduled for destruction but the 10.1.1.45 channel hasn't

Hi, Im looking at using MixMonitor to record calls and I know that I need to set the filename first. However, with the number of calls coming in, hard coding the filename isnt an option. So I need to do something like this:- MixMonitor(RANDOMNUMBER.wav) But can't find a way to generate a random number. I thought that maybe I could use a unique variable that already exists for the current

I am using a2billing as calling card platform with asterisk 1.2.17. After running for several days, if I issue 'sip show channels' command, I got a lot of dead sip channels although 'show channels' command only show 5 channels. What cause these dead channels? How can I clean out these dead channels? Will they pose any problem to my * server if left alone? What does this (d) mean?

My sip show channels shows some channels active that I can not make sense out of, and they have been that way for days, so I am pretty sure they are orphans. Is there a way to show active CALLS (instead of channels) to try and determine the source? Does the output below provide any clues as to why these channels might show active? Anyone aware of related bugs? The #'s indicate original

SIP channel hang ups are progressively getting worse and I'm really grasping at straws here trying to find out what the cause is. The problem start, once a week or so the SIP phones couldn't communicate with the server, though there was no error message on the server and everything appeared fine on the server. It's now doing it multiple times a day and I fear having to go back to our

Hi! I'm trying an asterisk-FWD connection. I'm using X-Lite OR SIPPS as the IP phone. I configured the X-Lite and SIPPS to use GSM codec. Whe I call FWD, I get this info on the channels when the call has not been stablished yet: sip show channels Peer User/ANR Call ID Seq (Tx/Rx) Lag Jitter Format 192.246.69.223 613 1770bf3430d 00102/00000

Hi all, i'm trouble with codec setup on an asterisk machine 1.4.18 and some Thomson ST2030 as extensions. In the users.conf file for internal extension i have: disallow=all allow=g729 allow=alaw allow=ulaw Without any codec installed (i mean with original g729 of asterisk) all go fine, calling from an extension to one other: Peer User/ANR Call ID Seq (Tx/Rx) Format

Hi all, I have a Cisco 1760 gateway and and Cisco 7960 VoIP phone running via Asterisk. Both are running g711A codecs and SIP. On inbound calls I get a native bridge, however on outbound calls I never get a native bridge. With other SIP gateways I do get a native bridge on the outbound call. My sip.conf is as follows: [cisco1760] type=friend context=incoming host=192.168.0.55 insecure=yes nat=no

192.168.1.107 199 6bd3fb49505 00102/00000 ulaw No Tx: ACK 192.168.0.100 110 5c5a4953-65 00101/00005 ulaw Yes Rx: ACK Those channels are stuck talking to each other. The phones are disconnected yet that connection remains. I can clear w/ a restart obviously, but is there any way to tear down a call like that from the CLI? Bill -------------- next

Can someone recommend the best way to view current calls in progress on the Asterisk console? Neither the 'show channels' or 'sip show channels' commands are easy to read. hestia*CLI> show channels Channel Location State Application(Data) SIP/2944093-f9e2 (None) Up Bridged Call(SIP/2944079-e7f2) SIP/2944079-e7f2

Hi all! Quite a mystery. The following happened when I was on holiday, and no one else has changed any configs of either Asterisk or the Cisco's in the building... The situation: Incoming works fine on all phones. Outgoing only works from non-Cisco phones. When calling from a Cisco phone to an external phone, all the Cisco-user hears is a ticking crackle and after about a minute the phone

Hi, I was wondering if anyone is successfully running Asterisk in a cloud environment. If you could state which cloud you are using, I'd appreciate it. Many thanks Dan Journo -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091014/076ff188/attachment.htm

Hi all, Below is what I did to run Asterisk in pass-thru mode: sip.conf: [general] disallow=all allow=ulaw canreinvite=yes For each channel, canreinvite=yes is enabled. No dial command has 't' option. However, it seems that Asterisk still stay in the media path and bridge the 2 end points. Am I missing something??? sip*CLI> show channels Channel (Context Extension

I'm trying to place a call from my Cisco 7960 and I'm receiving this error: Mar 1 06:19:44 NOTICE[3060]: chan_sip.c:7399 handle_request: Unable to create/find channel Mar 1 06:19:58 NOTICE[3060]: chan_sip.c:7399 handle_request: Unable to create/find channel I can't place calls, but I can receive them: mail*CLI> sip show channels Peer User/ANR Call ID Seq

Hi all, I have a question regarding pending (zombie) SIP sessions: on Asterisk CLI, with command 'sip show channels' , I see two channels in use with callID and other infos detailed; also 'sip show inuse' give me same result (in terms of channels usage): Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message xx.xx.xx.79 209

Hi, It seems ive broken my settings and now, asterisk isnt detecting my DTMF tones. What kind of diagnostics can I do to work this out? I've set the extension in sip.conf to everything listed on this page but no result. I've also played around with the settings on the phone with no help either. Someone once said on here that Asterisk and the SIP phone have to match, but that doesnt seem

Is there a guide anywhere which runs through how to set up asterisk with mysql? I've looked and almost all the document misses out relevant information. Thanks Dan Journo -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050920/1ce45adb/attachment.htm