similar to: DAHDI fxstest?

In the following example exten => _1NXXNXXXXXX,1,Set(GROUP(outbound)=myprovider) exten => _1NXXNXXXXXX,n,Set(COUNT=${GROUP_COUNT(myprovider at outbound)}) exten => _1NXXNXXXXXX,n,NoOp(There are ${COUNT} calls for myprovider) exten => _1NXXNXXXXXX,n,GotoIf($[ ${COUNT} > 2 ]?denied : continue) exten => _1NXXNXXXXXX,n(denied),NoOp(There are too many calls up) exten =>

I am using a context to change values in a DB. Currently in my context, I am passing it to exten => s,1,WaitExten(7) ; 7 seconds to input exten => s,n,Set(NEW_VAR=${EXTEN}) ;Here is my problem. This is the only way I know how to 'grab' user input, which was normally from ${EXTEN} but I realize this won't work for extension 's'...... The short google search I did

How can I mute the message "please enter the number you wish to call and press the # key" in a2billing??? I tried use_dnid = YES but still I keep getting the message prompt... thanks

hi folks. recently some of our customers complained about bad voice quality on the phone system. i looked at the logs and found a lot of these: [2012-11-03 08:26:38] NOTICE[11305] chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 1 [2012-11-03 08:26:45] NOTICE[11305] chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 1 [2012-11-03 08:26:54] NOTICE[11305]

does anyone get a hold of the SPA-941 Provisioning Guide? i tried call Sipura's tech support, seems like none of them heard of the term "remote provisioning". they kept refering me to their web site which i've check thoroughly, and could not find any documentations on the SPA-941. finally they gave me a phone number to call, which appears to be a fax machine. that's when i

Still a couple of questions...... I did configure extconfig.conf ... ;iaxusers => odbc,asterisk ;iaxpeers => odbc,asterisk ;sipusers => odbc,asterisk sipusers => mysql,asterisk,sip_devices sippeers => mysql,asterisk,sip_devices ;sippeers => odbc,asterisk ;sipregs => odbc,asterisk ;voicemail => odbc,asterisk ;extensions => odbc,asterisk ;meetme => mysql,general

Hi, I have small confusion in my configuration which is I had some DID's like 044578900-04457999. I was configured dial plan below mention. exten => _0XXXXXXXXX,1,NoOp(Int exten:${CALLERID(num)}) exten => _0XXXXXXXXX,2,Set(outgoing_ident=0445789${CALLERID(num):-2}) exten => _0XXXXXXXXX,3,NoOp(Ext ident:${outgoing_ident}) exten =>

our * crashed twice in a month with segmentation fault & a core dump. here's the stack trace: #0 0xb7e11965 in mallopt () from /lib/tls/libc.so.6 #1 0xb7e10c43 in malloc () from /lib/tls/libc.so.6 #2 0xb7e17090 in strdup () from /lib/tls/libc.so.6 #3 0x08057ada in ast_verbose (fmt=0x0) at logger.c:879 #4 0xb7b29009 in moh_files_release (chan=0x9455ca0, data=0xb657be48) at

Hi all, I cant ring my phone with fxstest, but all else works (playing tones, stats , regdump). My ring voltage is -53.7680 volts as reported by stats option to fxstest. However, I can ring my phone with Asterisk !!! With fxstest, I just hear a click if I am off hook, and ask it to ring my phone. I am in the UK, and have a ring capacitor installed to the fxs port. Even without that,

hi. i connected Asterisk to an NEC NEAX system with a crossover T1 cable and the Digium TE405P using E&M wink signaling. the connection's ok. however when dialing from the NEC to the Asterisk. most of the time the Asterisk only sees the first digit of the dialed number(which is 4 digits). some time if i dialed the 4 digits very fast it might get through. seems like there's a timming

I have deployed several 1.8.3.2 systems as upgrades of customers systems and now I am seeing random crashes. For some reason the builds lock up and stop taking sip connections. Existing calls stay on but when the user hangs up no new calls or reg attempts work. In most cases a "core restart now" cleans things up. Some times I have to kill the asterisk process. The stability of 1.8.2

hi folks. we recently deployed 10 Cisco 7960G w/ SIP firmware 7.3 on our network and we start having problems of dropping calls (actually the calls wasn't dropped it just the sound was muted for about 5-10 seconds, but most users will think the call dropped and hangup/redial). i've check the console output. there was a lot of messages like the following: Sep 28 15:00:49 NOTICE[8182]:

hi folks. i have the following puzzle: when i call certain cell phone# using a regular phone & POTS. the called cell phone co. usually return a message such as phone travel out of range or phone is busy etc. if the phone is unreachable. now when i have the following setup: sip phone -> asterisk -> PRI -> phone co. i call the same cell# and if it's unavailable. the PRI return

i recently bought an SP4000 conference phone but having problem provisioning it using ftp, every time it just hangs at "Updating initial configuration..." screen. when i switch it to tftp, it'll work fine. i though it was bootrom/firmware issue so i upgrade it to bootrom 3.2.2/sip 2.0.1 but it makes no difference. any thoughts? p.s. i'm using debian sarge proftpd 1.2.10 and the

hi folks. we've experienced some weird problems lately. we have about 600 SIP phone on a single system running *1.4.26.2 for about a month. recently there was massive UNREACHABLE messages like this one showed up: chan_sip.c: Peer '2699' is now UNREACHABLE! Last qualify: 1252 then they all became reachable again in a few seconds. sometimes it last for couple minutes. but sometimes

Hello, I installed Asterisk 1.6.2.17.3 ( latest as of yesterday ) and had multiple problems with DTMF. I have two machines, we'll call them asterisk and asterisk-pri. Asterisk does IVR and asterisk-pri has a PRI card in it and connects to the PSTN. The two servers communicate via SIP with RFC2833. I setup logger.conf on both machines to display DTMF to the console. Both are built from

hi folks. i'm experimenting with iaxmodem + hylafax using DID to determine where to send the fax to it's final destination. however i have difficulties passing the DID information from iaxmodem to hylafax. in extensions.conf: exten => _XXXX,1,Dial(IAX2/iaxmodem0/${EXTEN}|20|r) exten => _XXXX,n,Dial(IAX2/iaxmodem1/${EXTEN}|20|r) exten => _XXXX,n,Busy exten => _XXXX,n,Hangup

Hi to All, I've an Asterisk CVS Head working with Mysql. My problem is that instead of ANSWERED or something like, into the CDR database records, I find only numbers. This is also a problem to let ASTPP works, infact I receive an error: ERROR - ERROR - ERROR - ERROR - ERROR DISPOSITION NOT MATCHED and the call has no cost. Any suggestions? Thanks -- .:FaberK:.

Hi all, I have installed this package onto my Debian and placed the files i want the Cisco 7960 phone to get from the tftpdboot directory. But it doesn't seem to work. Are ther any special settings I should do to this server? Many thanks for all your help, Christian

I'm running Asterisk 1.4.18 and having a problem with the clearglobalvars option. I have a NIGHT_SERVICE variable which I initially set equal to off. I then have an extension they can dial which will toggle that variable. My problem is when you enter the CLI and type "reload", it resets to "off" again. I've tried setting the clearglobalvars=no as well as just