similar to: MOH in the middle of the call

We need to monitorate the E1 with nagios, somebody did this? any ideia? Thanks in advance! -- Atenciosamente, ------------------------------------------------------- Dario Quiroz (71) 9275-9080 gtalk: darioquiroz at gmail.com ------------------------------------------------------- -------------- next part -------------- An HTML attachment was

I found this old post using a Google search for DTMF tones heard during an Asterisk call. The calling party does not hear them, only the called party. We are experiencing this sporadic DTMF "beep" followed by a momentary silence on a random number of our calls. This happens on trunk to SIP and SIP to SIP calls, so it's not PRI related. Since this thread is dated 2003, and the

Hello, I want request to community collaboration to test xenwebmanager before release a beta version. Idea is found bugs and features not working to fix before beta version. For test this version you only need download from: https://sourceforge.net/projects/xenwebmanager/files/xenwebmanager_rev69_full.tar.gz/download uncompress: tar xvfz xenwebmanager_rev69_full.tar.gz and run: cd

Hi! I tested shutdown in server samba-dc101, but samba-dc102 e samba-dc103 dont replication each other. I wait for more 10 minutes!! In logs dont see information try connection. samba-dc102 <-> samba-dc103 It is problem..... Any Ideia ? Regards; On 23-03-2018 11:43, Carlos wrote: > > Hi! > > Thanks for answer ! > > This caught my attention, because in other

On 3/23/2018 9:56 AM, Carlos via samba wrote: > Hi! > > Any Ideia ? > > Regards; > > > On 22-03-2018 14:09, Carlos wrote: >> >> Hi!! >> >> I have 3 Dcs, all system and configuration equal. >> >> samba-dc101(FSMO) >> >> samba-dc102 >> >> samba-dc103 >> >> But, then i executed command samba-tool drs

Hi, My configuration is the following: Xen 3.3.1 compiled from sources(with PAE enabled) Dom0 Debian Etch i386 I''m trying to create Debian domU from scratch with netinst and get the kernel and ram disk to boot to installation procedure from install.386/ folder of netinst iso image. Then I use the following config file debian.cfg for installation: kernel =

Hello! I used: samba -V Version 4.3.11-Ubuntu lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.2 LTS Release: 16.04 Codename: xenial I want hide directorio "lost+found" , but option hide files dont work. [BACKUP] path = /mnt/backup browseable = yes writeable = yes printable = no

Has anyone had problems accessing random websites since going up to 6.4? Since about the day after I got partly upgraded, if I try to access nytimes.com, or orbitz.com, I get server not found. With a lot of work, I, my manager, and the other admin, found that setting options edns0 in /etc/resolv.conf fixed it - I suspect that the network folks updated their internal nameservers (which are M$)

Hi!! I have 3 Dcs, all system and configuration equal. samba-dc101(FSMO) samba-dc102 samba-dc103 But, then i executed command samba-tool drs showrepl  in  dcs server: samba-dc101(FSMO) -> List 2 Dcs 102 and 103(for me is ok) samba-dc102 -> List only Dc 101 samba-dc102 -> List only Dc 101 samba -V Version 4.7.3 (Compiled by me) S.O : lsb_release -a No LSB modules are

I read several posts about SMTP being blocked at ISP. My ISP has the same limitation. My ADSL connection (1 fixed IP) only permits outbound connection to port 25 to their server. None of those posts answered my need. I tried FAQ also. I have several internal email clients/bots that needs to retrieve/send messages, some of then are notebooks. It''s not fair to change SMTP server to the

Am 2016-03-22 um 10:45 schrieb Garming Sam: > Hi, > > As you should know, 3.x is out of support. Assuming this is related to > the KB2992611 MS update, basically the bar was raised for clients in > response to a security issue, and caused havoc for people on Windows as > well. In order to fix 3.x, a good chunk of the infrastructure written > for Samba 4 (AD) would likely have

Hello, Somewhat off-topic, but seeking some input from other tech folk on this list. I have a Tripp-Lite SMART 2200 (a white tower that looks similar to, but predates the black SMART2200NET) that just failed its monthly battery test so I bought new batteries and replaced the old ones. Sadly once put back together, plugged in and enabled it did not power up--no lights, sounds, smoke, etc. I took

Hi! In Option "Inter-Site Transports", i have only  one the name "DEFAULTIPSITELINK" , in properties Sites in this link: Matriz Filial Matriz -> site with DC1 and DC2 Filail ->  site With DC3 Regards; On 17-05-2018 13:12, lingpanda101 wrote: > On 5/17/2018 12:07 PM, Carlos wrote: >> Hi! >> >> Thanks for answer. >> >> But, i allowed

Hi! DC101 and DC102 same network . DC103 other network. DC101 and DC102 same site DC103 other site. I wil shutdonw DC101 for 20 minutes for te teste. Regards; On 23-03-2018 12:58, lingpanda101 wrote: > On 3/23/2018 11:29 AM, Carlos via samba wrote: >> Hi! >> >> I tested shutdown in server samba-dc101, but samba-dc102 e >> samba-dc103 dont replication each

Hi! I have 3 Samba 4 , version 4.7.3 running in Ubuntu Server 16.04. All is ok, but GPO in DC3, with erro the permission, with dont load in windows(gpresult /force). My smb.conf all samba server DC. [global]         netbios name = SAMBA-DC103         realm = <DOMAIN>         server role = active directory domain controller         server services = s3fs, rpc, nbt, wrepl, ldap,

I am using centos 5.1. I want to keep my machines always powered on. Some machines (important ones) are UPS'd. I have also set in the BIOS (gigabyte motherboard) the power options that after power loss should do a full on. The other day we had just a momentary power drop. the UPS machines had no issue of course with that. However, the other machines did not come back on. Is there anything

Hi list, Right now I''ve to find some graphic (or web!) interface to administrate our new data center infrastructure who will be running over Xen. I''ve been googling around to find something, and looks like Enomaly is a good choice. Can anybody give me some feedback about this? Or maybe recommend another front-end interface? Thanks in advance. Boris.

Hi! I have two server samba member domain. Version 4.8.3(Compilated) Running in Ubuntu LTS 16.04 With GlusterFS(Replicated) and Heartbeat(for HA) IP A: 192.168.200.1 (DNS: Fileserver1) -> Master IP B: 192.168.200.2 (DNS: FIleserve2) -> Slave IP C:192.168.200.10 -> (DNS: Fileserve) -> Heartbeat -> IP that stays with master server , when UP, if down IP "junp" for

Hi! I have 2 DC, now add one more DC, but all dcs dont view between they. New DC is "DC2" DC1 - vlan10 -> OK to DC3(Connectad by openvpn) DC1 -> vlan10 -> OK to DC2(vlan50) DC2-> vlan50 -> OK to DC1(vlan10) DC2-> Openvpn -> Dont "see" DC3 DC3 -> Openvpn -> OK to DC1(vlan10) DC3 -> Openvpn -> Dont "view" DC2(vlan50) All version

Hello list, is it normal that when adding new moh-files to the directory /var/lib/asterisk/moh/, asterisk does not see these new files ?! When I do a "moh reload", then Asterisk is aware of the new files... Is there a solution that does not need a "moh reload" ?! Kind regards, Jonas. -------------- next part -------------- An HTML attachment was scrubbed... URL: