Displaying 20 results from an estimated 1000 matches similar to: "Youmail RDNIS"
2006 Apr 28
2
Asterisk DNID/RDNIS with Dial iax2
Dear Asterisk-Users:
Question:
========
How do I get asterisk to pass DNID/RDNIS information between
asterisk machines using iax2, in a Dial(IAX2...) command ?
Setup:
=====
I have two asterisk boxes, MASTER and SLAVE. MASTER is running
1.2.0 and SLAVE is running 1.2.1. The main box handles incoming calls
on a multiple lines (both via hardware connection to our internal PBX
and calls
2014 Aug 28
1
RDNIS with tel: vs. sip: header
Has anyone had success patching chan_sip.c so that Asterisk will recognize
the tel: header for RDNIS information?
exten = get_in_brackets(tmp);
if (!strncasecmp(exten, "sip:", 4)) {
exten += 4;
} else if (!strncasecmp(exten, "sips:", 5)) {
exten += 5;
} else {
ast_log(LOG_WARNING, "Huh? Not an
2004 Oct 26
2
RDNIS
I'm trying to use RDNIS with asterisk, and I don't appear to be
receiving any information (the value is blank). The upstream who
provides the PRI says they are passing all the info through, I don't see
this value coming across. I've tried it with a Verizon call forward, as
well as a Nextel with the same results for both. I'm trying to use this
for Voicemail. I'm using
2006 Dec 09
2
RDNIS question
Perhaps I've got the whole concept wrong, but here goes:
Using 1.4, when someone from the outside dials my direct line (123456),
I want it to call my extension at work (SIP/456), my extension in my
home office (vpn connection to corporate lan, SIP/678) and my mobile
(654321). So my dialplan is thus:
exten => 123456,1,Dial(SIP/456&SIP/678&Zap/G3c/07803654321,30)
exten =>
2005 May 20
1
RDNIS (DNID) Call Routing
I haven't been able to find much support for the RDNIS or DNID variables
online.
I am trying to prove a concept of call routing before we move towards
development of a production system. I need to have calls routed coming into
a call center based on DNIS. What type of syntax is needed in the
extensions.conf file and how can I test it with a softphone (ie: can I
emulate the DNIS from xlite)?
2008 Dec 16
4
RDNIS and asterisk
I have a couple of numbers that are diverted to a number that is
conected to an isdn30 card, running asterisk 1.4.
eg.
123456 => 22334455
654321 => 22334455
What I would like to know is the number of the orginal number dialled
(123456 or 654321). I thought that RDNIS was the answer, but it is
always coming up blank.
When I did a debug on the pri span, I saw the following message
2010 Oct 26
2
Trim the RDNIS
What I am needing to do is to trim the 1 from beginning of the RDNIS and
I have tried using the CUT function but cannot seem to make it work for
me. What we have is a phone number like this, 18881232342 and want to
make it like this 8881232342. I appreciate any help that you guys can
give. Thanks!
--
*Chris Ramirez*
TELE-ONE COMMUNICATIONS, INC.
cramirez at tele-onecom.com
903-531-0777
2010 Sep 24
1
RDNIS not passed from one box to another with BRI access
Hi,
I've configured a new Asterisk 1.6.1 box to replace an old Bristuffed 1.2
Asterisk.
Since then, it happens that forwarded calls are not presented the way they
used to be.
It seems that now, some endpoints are displaying the original caller id
(that's what I'm trying to achive), while some are displaying the
redirecting number :
so if A calls B, B forwards to C
depending on where
2006 Dec 30
0
Theory behind RDNIS and does it work or not?
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Hello everybody,<br>
<br>
currently I'm implementing redirection
2010 Jun 19
0
OT - Explain RDNIS
Hi,
1. Can you explain what RDNIS is when it should used with Asterisk ?
I've read this http://www.voip-info.org/wiki/view/RDNIS but I'm still
wondering if I should use it.
My understanding is:
when dialing out through an ISDN line, Asterisk is sending two numbers
(using signalling channel) :
- one is CALLERID(num) which is supposed to be whatever the Asterisk admin
whishes to be,
- one
2009 Mar 24
0
Issue with RDNIS
Hello,
Does anyone know why I am unable to retrieve the "Redirecting Number"?
I've done a "pri debug span 1/1" and can see the number being passed
correctly to Asterisk:
< Redirecting Number (len=15) [ Ext: 0 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
< Ext: 0 Presentation: Presentation allowed
of
2004 Jul 15
2
Cisco phones and Messages and Forward ToVM keys
; Below assumes you are using the same number for Voicemail boxes as
extensions
; if ${RDNIS} is blank then GotoIf will go to extension 2, otherwise it
will go to extension 102
exten => 8500,1,GoToIf($[X${RDNIS} = X]?2:102)
exten => 8500,2,VoiceMailMain(s${CALLERIDNUM})
exten => 8500,3,Hangup
exten => 8500,102,VoiceMail(u${RDNIS})
exten => 8500,103,Hangup
; you should now be able
2011 May 20
1
SIP Diversion RDNIS - how to get reason parameter?
Hi out there
To play the correct announcement in app_voicemail I whould be able to read the
SIP Diversion Reason which ist sent by another PBX:
Invite contains:
Diversion: <sip:+41315995003 at 157.161.10.190>;reason=no-
answer;privacy=off;counter=1
Asterisk Logs:
RDNIS for this call is is +41315995003 (reason no-answer;privacy=off;counter=1)
From what I see in the source of chan_sip
2009 Dec 02
2
Variable Name needed
Other than having stripping out IPs this is what I am receiving for my
voip calls. Now I normally use ${CALLERID(rdnis) for RDNIS, this works
fine calls that come in on my PRI. BUT at least from this VOIP source
the To field which is my RDNIS information for these calls, doesn't
actually fill into ${CALLERID(rdnis). But as you can see I'm getting the
information.
My question is, Does
2004 Jun 04
1
Voicemail and Cisco phones: Dialplan example
Assume you have the messages button on your Cisco phone set to dial
3009. Here's an sample dialplan entry that will make the "DND" and
"ToVM" and "Messages" button work as expected. This should work for
both -stable and -head.
exten => 3009,1,GoToIf($[X${RDNIS} != X]3009,4)
exten => 3009,2,VoicemailMain()
exten => 3009,3,Hangup
exten =>
2009 Aug 26
4
Fw: app_swift issue
Hi Shakeel,
I had the same problem building app_swift (1.6..) myself and searched the web far-and-wide for a solution. I eventually contacted Darren Sessions -- who was maintaining that plug-in -- about a month ago. He was involved in another project and said he might be able get to it after a few weeks. But, since then, his website http://www.darrensessions.com/ has gone out of comission.
I
2009 Feb 04
1
4.4p1 to 5.1p1 = $HOME/bin no longer in PATH?
What's going on here? I see nothing about this in the
ChangeLog, so I am confused.
==================================================================
~:cairo> pwd
/afs/rcf/user/jblaine
~:cairo> cat bin/tester
#!/bin/sh
echo "TESTER program in $HOME/bin!"
~:cairo>
==================================================================
OpenSSH 4.4p1 (previous version we were
2012 Jan 25
4
My ENC won't work, YAML is valid AFAIK
If anyone has any ideas, please share. I''m at a loss.
YAML from Puppet Enterprise 2.0.0 default ENC:
++++++++++++++++++++++++++++++++
---
name: rcf-cm-master.our.org
parameters: {}
classes:
- core-permissions
++++++++++++++++++++++++++++++++
YAML from my Python ENC using PyYAML. This results in ''cannot find node''.
++++++++++++++++++++++++++++++++
---
2006 Dec 15
1
What's up with DATETIME and TIMESTAMP in Asterisk 1.4beta3 ?
Hello,
In Asterisk 1.4 beta 3, the UPGRADE.txt file says:
Variables:
* The builtin variables ${CALLERID}, ${CALLERIDNAME}, ${CALLERIDNUM},
${CALLERANI}, ${DNID}, ${RDNIS}, ${DATETIME}, ${TIMESTAMP},
${ACCOUNTCODE},
and ${LANGUAGE} have all been deprecated in favor of their related
dialplan
functions. You are encouraged to move towards the associated dialplan
function, as these
2006 Mar 06
1
cdr records on transfer
Hello!
i'm trying to set up transfer without using the respective
asterisk-function but with the built-in phone functions. my goal is to
have the first callleg billed to the caller and the second callleg to the
callee, who is responsible for the forward(and i can't bill a unknown
caller anyways)
so far it's working without problems, but my cdr's are messed. with the
help of the