similar to: Asterisk 1.6 without DAHDI

I have a CentOS release 4.7 box running asterisk-1.4.26.1 with dahdi-linux-2.2.0.2 and dahdi-tools-2.2.0 I regularly get these messages, is this something i should be worried about? [Aug 21 01:05:07] VERBOSE[4343] logger.c: codec_g726.so => (ITU G.726-32kbps G726 Transcoder) [Aug 21 01:05:07] ERROR[4343] codec_dahdi.c: Failed to open /dev/dahdi/transcode: No such file or directory [Aug

I have asterisk 1.8.2.3 + A102D Sangoma card 2 port T1. when i am starting asterisk i am getting this error on console. func_callerid.so => (Party ID related dialplan functions (Caller-ID, Connected-line, Redirecting)) == Registered application 'PrivacyManager' app_privacy.so => (Require phone number to be entered, if no CallerID sent) == Registered custom function

Let me know if I should post this on the asterisk-dev list instead. I am building a Linux-Vserver (http://www.linux-vserver.org) host system that will have several guests running Asterisk. Since the guests can't load kernel modules or do other dangerous stuff, but can access them I built zaptel 1.4 and it is now loaded by the host. The issue I see is there will be no "Zaptel"

I'm running dahdi on the host system, and have added the /dev/dahdi/ devices to the guest vserver as recommended in Beave's "Virtual Private Asterisk" whitepaper (http://www.telephreak.org/papers/vpa/). I tried copying libtonezone.so and libtonezone.h to the guest, but I couldn't anything to replace zaptel.h in DAHDI souce (it seems dahdi.h was deprecated?). I need to

I've got a question about codec_dahdi witrh a system running Asterisk 1.6.0.6 and DAHDI 2.1.0.4 with a TE410P card. The system is used primary to route calls between different PRI connections, so no transcoding between codecs is happening as far as I am aware. 1) How can I use codec_dahdi? Would it be useful when passing a call from one dahdi channel to another dahdi channel? 2) I'm

I'm building a two node cluster to run vserver systems on. I've setup glusterfs with this config: # node a volume data-posix type storage/posix option directory /export/cluster end-volume volume data1 type features/posix-locks subvolumes data-posix end-volume volume data2 type protocol/client option transport-type tcp/client option remote-host

When syncing one backup system (running dirvish, but that's not really relevant) to a second long-term backup system which uses btrfs snapshots, I get the following output: rsync: link "/parasite.oob.telegraaf.net/vservers-var-www/tree/elo/var/www/lokaalx/openx-htdocs/etc/xmlcache/.svn/prop-base/cache_etc-changes_schema-tables-core-12934.bin.svn-base" (in backup-aquagirl) =>

Hi I am looking for quite a while now to run Puppet inside a vserver. The installation worked perfectly, but when I run a test I get this message: smb-configmaster / # puppetd --server 192.168.0.144 --waitforcert 60 --test /usr/lib/ruby/site_ruby/1.8/puppet/network/client/ca.rb:31:in `request_cert'': Certificate retrieval failed: Could not connect to 192.168.0.144 on port 8140

I don't know what to call what I'm trying to do so I'll explain the situation. I had a total complete crash of the Linux-Vserver system that was hosting a Postfix+Dovecot guest with a three domains and 1-5 accounts per domain. Lots of mail though. Before it completely melted down I as able to get to the data (messages) and save them and the configuration files for both Dovecot

hello I''m using the 2.6 series 5 vservers on eth1 running on debian unstable and I wanted two of them to be used as "proxies". One of the proxies has 3 interfaces (well 4 if you count the ath0 interface whose traffic I''d like to pass through the "vproxy"); one facing the hosts''/out interface, one facing the "dmz" where two vservers

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi *! I''m currently working on integrating VServer support into puppet. I have uploaded a prototype for managing interface configuration to the Cookbook at http://reductivelabs.com/cookbook/VServerRecipes and would very much appreciate feedback about style and functionality. Regards, David - -- - - hallo... wie gehts heute? - - *hust*

Dear All, I have a problem to start Shorewall on a Debian 1.3 Linux box. Here is some info: Output of ''/sbin/shorewall trace start 2> /tmp/trace'' is in the attachment. Shorewall version: 2.2.3 Output of ''ip addr show'': 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: bond0:

Hi when i use MeetMe, i have this errors: app_meetme.c: Unable to open pseudo device Where is the problems ? i have too warning and error into my logs: [Nov 1 07:26:17] WARNING[18544] res_musiconhold.c: Unable to open pseudo channel for timing... Sound may be choppy. [Nov 1 07:26:17] WARNING[18544] config.c: Realtime mapping for 'iaxpeers' found to engine 'mysql', but

I am getting the following warnings on the CLI when loading Asterisk 1.6.1-rc1: [Feb 12 12:32:34] NOTICE[22261]: timing.c:59 ast_install_timing_functions: Multiple timing modules are loaded. You should only load one. [Feb 12 12:32:34] ERROR[22261]: codec_dahdi.c:398 find_transcoders: Failed to open /dev/dahdi/transcode: No such file or directory [Feb 12 12:32:33] WARNING[22261]:

Has anyone got Xen working with say, SELinux? Or vserver? Wesley Parish -- Clinesterton Beademung - in all of love. Mau e ki, "He aha te mea nui?" You ask, "What is the most important thing?" Maku e ki, "He tangata, he tangata, he tangata." I reply, "It is people, it is people, it is people." ------------------------------------------------------- This

Hi again! I tried to attach two VoIP-phones to my new Asterisk 13.14.1 on a Banana PI with Armbian/Debian 9. First test was to call a test service that say the time. Works! Second test was to record my voice and play it again. Works! Third test was to call the other VoIP-phone. It does NOT work... :( Then I noticed that, by starting, Asterisk says the following messages: [Feb 15 18:42:54]

I just upgraded to 1.6.2.rc-1 after running betas 2 and 3 with no problems and while everything seems fine i get these message at startup and than all is well. Should I be worried or do i need to let the team know about this? Also, is not finding "/dev/dahdi/transcode" a problem I should be worried about? And lastly conf2ael always segfaults when I try to run it. it did run once

Hello, Any word on when extended attribute support will be added to OCFS2? What are the impediments to someone implementing this? Alternatively, has anyone implemented a patch to add extended attribute support to OCFS2? I've been watching the open source Lustre fs development, too. I noticed that they have added extended attribute support. However, OCFS2 is more attractive for some

Hi i tried to use rsync to backup my remote server.I want to exclude folder like /var /proc ... .I use --exlude-from=/etc/rsync/excludes the file looks like this: - */var/* - */proc/* etc. My problem is that i run vservers on this machine and i don't want that the folder like /proc in this vservers are backuped how can i exclude all paths wich contain such foldernames? Please help me

On Thu, Jun 6, 2019 at 12:17 PM Malcolm Davenport <malcolmd at sangoma.com> wrote: > Howdy, > > There's a dahdi-linux-complete-3.1.0-rc1+3.1.0-rc1.tar.gz. > > Try that. > I noticed that was there, but I didn't try it originally because it's obviously a beta version. However, I did download it and try it. It does compile, but doesn't work correctly. For one