similar to: Asterisk and QoS

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and  HFSC so i''m doubt a lot thing and your reply are so very helpful to me ... My question is In HTB tc command question 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about

Hi, Are there GUI (preferable) or scripting tools available somewhere that can help me with traffic shaping? I have found MasterShaper and tcng but hey seem both unmaintained. Directly writing scripts is still a bit out of my reach, so I would like to learn by using tools... TIA Joost

Hi I am search a sample config for my linux box: Shorewall 3.2.3 Eth0 => Internet Access 4Mbits on ethernet Eth1 => Lan Eth2 => Lan 2 Eth3 => Lan 3 i want limit the internet access: Eth1 = 2 Mbits Eth2 = 0,5 Mbits Eth3 = 1,5 Mbits but if eth1 don''t use 2 Mbits other lan can use it anyone have a simple sample config for help me ? Thanks bye

now i''m read a lot of knowledge paper about traffic control in linux because now i''m try to develop and research about traffic shaper so can everybody tell me about my topic ... Is it can do for real???? my topic is " now, many organization use traffic shaper for control traffic and bandwidth because don''t want something example some mac address, ip address,

I'm missing something simple I think: I have an spa3102 for which I want asterisk to use the incoming pstn callerid when it sends the call to a local extension (207). callerid works fine for the internal phones (between each other) The spa3102 is picking up the PSTN callerid and displays it in its own status pages Asterisk however, doesnt see the callerid at all. The spa3102 is set to:

Hey folks, I stumbled across the Mastershaper project ( http://www.mastershaper.org/ ) but I have a little problem: I wanted to shape the traffic coming from the router itself aswell as coming from the LAN behind the router, for that task I need IMQ, but with IMQ iptables-(layer7)-matching is not possible. Now I''ve talked with the programmer and he said the following: >The problem is

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and HFSC so i''m doubt a lot thing and your reply are so very helpful me ... my question is 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about in each chain must identify

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and HFSC so i''m doubt a lot thing and your reply are so very helpful me ... my question is 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about in each chain must identify fallback

Hello all, I am with a doubt about QoS solution... I have a 4 Mbit backbone coming from the telco I use... This is the link I serve to my clients, so I make this classes: $TC qdisc add dev $DL root handle 1: htb default 60 CLASS="/sbin/tc class add dev $DL parent" $CLASS 1: classid 1:1 htb rate 4096Kbit $CLASS 1:1 classid 1:10 htb rate 256Kbit ceil 3072Kbit burst 15k $CLASS 1:1

Hi, I have implemented QOS classifiers using TC with HTB. The classification is working. I would like to know whether there is some tool which will help me in monitoring the bandwidth share of the various classes. Thanks, Vinod C

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have

All: Does anyone know what the burst and cburst parameter do? My understanding so far: * I see a lot of different definitions on the web. It seems like burst is the number of bytes sent before serving other queues/classes. So if burst was 1000 bytes and class rate was 100kibit per second. It would send 1000 bytes each time the scheduler service that queue to a rate of 100 kbit per

i doubt about ruleset in mastershaper demo about why use hfsc at leaf class but inner class use htb??? how different for manage traffic like it???? /bin/false qdisc add dev eth1 handle 1: root htb default 1 /bin/false class add dev eth1 parent 1: classid 1:1 htb rate 2048Kbit ######### Incoming Rules ######### chain HB /bin/false class add dev eth1 parent 1:1 classid 1:21 htb rate 128Kbit ceil

ive got problems with my network (120 people) ive got big pings (300ms)m whereas there are normally about 19ms. i do not know if my qos is proper (fast i mean). www.tdi.pozman.pl/fir2 - my qos www.tdi.pozman.pl/rules - my firewall can sb tell me if do it ok ? -- *Dariusz ''tdi'' Dwornikowski | Gentoo | admin at pozman.pl |

Hi I share my bandwith (adsl 512/128) between 12 users. I set up simple qos script for incoming (IMQ) and outgoing traffic using htb in root, 4 classess and esfq qdisc at leafs. Interactive traffic goeas to class1 , http,mail etc. to class2, p2p, ftp to class3, and rest to class4. Classess divide link in proportion 20% (prio 1), 40% (prio 2), 20% (prio 3) ,20% (prio 4) This works

Hello, I''m trying to configure several wireless routers with QoS support. The idea is to implement differentiated services so that VoIP traffic gets the maximal priority, then video, control traffic, interactive data traffic and best-effort traffic. I have seen that CBQ used to be chosen as qdisc for implementing bandwith share in DiffServ but now HTB is preferred because it is

Group, I am reading about tc (traffic control) and willing to get my feet wet. As requirement, there should be HTB compiled in the kernel. I grabbed a Mandrake 8.2 distro, and didn''t installed the kernel source. Anyone knows if the HTB is compiled in Mandrake 8.2, or point a way to find that out? I tried to read the /usr/src/kernel.xxxxx/.config file, but it doesn''t exists.

hi i am running Debian/GNU Linux with 2.4.26 kernel and radius server my kernel conf looks like this <*> Packet socket [ ] Packet socket: mmapped IO < > Netlink device emulation [*] Network packet filtering (replaces ipchains) [*] Network packet filtering debugging [ ] Socket Filtering <*> Unix domain sockets [*] TCP/IP networking [*] IP: multicasting [*] IP: advanced

Hello i''m having some issues trying to match packets using iptables mark, iproute filter and tc filter.- i mean, when i do iptables -t mangle -A INPUT -p tcp --dport 80 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -p tcp --dport 25 -j MARK --set-mark 10 iptables -t mangle -A FORWARD -p tcp -i eth0 -o eth1 --dport 25 -j MARK --set-mark 10 $TC qdisc del dev $INET_IFACE root $TC

I am completely new to this.. I am trying to make simple traffic control.. I have read quite some manuals and posts that i found, but i don''t understand much, i think.. My situation is: i have linux server which i am using for firewall for local network.. also on same linux server i have torrentflux for downloading torrents.. What i want to do is to give priority to local clients(2-3