similar to: beeping during call

Looking for a router to connect to a 5/50 cable modem that works with Sip. A Crisco RVS4000 installed now has real problems with Sip, one-way audio and throughput not up to the WAN speed. No VPN needed, something affordable, $200-$350 US range. Every thing I looked at in that range had some reported problem except pfSense in a ATX box. Any recommendations or comments appreciated. thanks

I upgraded our Asterisk 13 LTS to Asterisk 16 Certified 16.8 yesterday and converted form SIP to PJSIP using the python script as a start and then mofiying from there.  I ran into an issue when testing that incoming calls from MagicJack would go silent after about 10 seconds.  This happened while in the automated attendant area.  This problem did not occur with Asterisk 13 LTS.  I reverted PJSIP

Does anybody have T.38 faxing working with Flowroute? I am running Asterisk 1.6.2.7-rc3 with spandsp 0.0.6-pre17. I can successfully receive faxes over ulaw. I enabled T.38 with t38pt_udptl=yes in sip.conf. When I receive a fax it tries to negotiate T.38 and Flowroute sends back a Bad Request response saying I have a SIP syntax error. Flowroute support is recommending that I try again after

On Thu, Jul 15, 2010 at 10:19:10AM -0700, Steve Casto wrote: > > https://issues.asterisk.org/view.php?id=17529 > Thanks Tzafrir: > Unclear on how to apply patch, here is what I get: > [root at localhost asterisk-1.4.32]# patch -p1 < ../bug17529.diff.txt > can't find file to patch at input line 5 > Perhaps you used the wrong -p or --strip option? > The text

asterisk 1.4.32 have zapata.conf soft link to chan_dahdi.conf to use flash operator panel < 2.0 (from extensions.conf) exten=> 304,1,ChanSpy(Zap/4|q) exten=> 304,2,hangup There is no entry ChanSpy(Zap/41) in extensions.conf On dialing 304 and Zap/41 is in use this happens: [Jul 1 18:24:47] VERBOSE[14447] logger.c: -- Executing [304 at flash:1] ChanSpy("Zap/31-1",

I have an Asterisk 1.4.2 system that has been installed for about 3 months now in our home. We converted all of our phones to SIP phones, and use two different trunk providers (BroadVoice for incoming & FlowRoute for outgoing). Most of the time its working flawlessly. But about 1/3rd of the calls that come into us complain of an echo and what is best described as latency issues. Its

Hello List, Since I'm looking for a new VoIP provider for US origination/termination, I will very appreciate if you can chare your experience with Flowroute, Vitelity and Voip.ms Thanks in advance! Elder D. Arohuanca dCAP 1497 Lima - Peru -------------- next part -------------- An HTML attachment was scrubbed... URL:

What is the best way for me to setup Fax Capability with VOIP only. I have a Asterisk Server hosted on the internet without a modem. I'm using Flowroute, which is working awesome, for VOIP calls. I only have a SIP Phone at home and two Printer/Scanner/Fax Printers. I'm not sure which Fax Addons or Extensions I should use for Asterisk. I'd like it to Self Detect on any line. I

Can anyone comment on using SMS in conjunction with VoIP service using one of these three VoIP providers: voip.ms, vitelity.com, flowroute.com? Are some SMS services more compatible with Asterisk (i.e. SMS over SIP works perfectly or not)? Is it best to use a different data channel for SMS messages (i.e. SMS via HTTP, SMS via XMPP) instead of Asterisk's built in SMS application

Hello, I'm having a problem trying to do this, and it used to work with Asterisk 1.4. Since Asterisk 1.6 series I have not been able to place more than one call to a DID. I get this message: Skipping dialing interface 'SIP/16034817531 at flowroute' again since it has already been dialed I'm trying to do this because many of my clients have roll-over lines and they need to

Hi, I've been getting complaints lately that callers to my IVR are pressing a digit once but the system is responding as if they pressed it twice (once for each of two consecutive menus). I'm using an AGI script and logging all DTMF entries - and to the script, at least, it looks like the digit is being pressed twice. The TN being called is a VOIP number (provided by Flowroute) and being

I have a block of DID's that I ported to Vitelity about 7 days ago. The problem is if a POTS caller dials into the system, his dtmf is not heard at READ() or Background() while a prompt is played. After the prompt is finished, then dtmf is heard. I've been working with their support, but it still not resolved. SIP callers are not effected. Yesterday, I purchased a DID from

Hello everyone. I have a timing slips errors and I can't understand what source of the problem is. My installation has 2 digium cards: TE420 and TE220 cards in one server. There are 3 spans (E1) to PSTN and 3 spans to internal PBS stations - normal installation for transit communication. Span configuration is: span=1,1,0,ccs,hdb3 #TE420 - first port. To PSTN. span=2,0,0,ccs,hdb3 #TE420 -

All, I'm trying to send an SMS directly from asterisk but it doesn't seem to be working. The SMS() function does create an outgoing file but doesn't deliver the SMS. Can anyone help me to understand how SMS() works. Thanks. extensions.conf example: same => n,SMS(hello,a,17654307001,"hello nick") - nick

> So 9316 works and 9320 doesn't? How about latest SVN. I just ran > everything in valgrind and saw no error at all. Can you give more info > on how to reproduce (with speexenc)? > > Jean-Marc > I went to check my code and it turned out to be a fault in the speex_encoder_destroy being used to destroy a decoder state. It seems that the new revision thriggered this error.

We currently use asterisk 1.4.x with two Zaptel cards connected to POTS lines. So we make "outbound" calls from their softphones (using ulaw format), which go over a dedicated DSL line to the asterisk server in our office, which then converts the calls to POTS. This all works fine, assuming there aren't any unusual problems. It sounds as good as POTS on both ends. However, we

Hi I'm having problems getting the TE420 working in HP DL380G5 servers. The cards don't seem to be detected 100% by the BIOS. With two cards in the server they are never detected. things I've tried: 1 Update firmware to latest (P56) for the server 2 change irq settings 3 disable all onboard devices on server and remove raid controller 4 different cards in different slots What I

> Can anyone comment on using SMS in conjunction with VoIP service using > one of these three VoIP providers: voip.ms, vitelity.com, > flowroute.com? Are some SMS services more compatible with Asterisk > (i.e. SMS over SIP works perfectly or not)? Is it best to use a > different data channel for SMS messages (i.e. SMS via HTTP, SMS via > XMPP) instead of Asterisk's built

I am trying to retrieve the cause code of a outgoing call over a PRI where the number called is out of service. When an out service number is called I get a recording that the number dialed is not a working number. I see cause code 1 in in the CLI as soon as the call is dialed the Telco recording goes on for 30 sec. then hangs up. Any idea on how retrieve info that the called number is is

Hello I have recently configured TDM400P with four FXO ports. My next requirement is to configure for E1 line. which contain 30 phone lines and 2 for signalling information. The problem is I dont want to go for E1 line directly .....Is it possible to get simulation for E1 line ... so that i can develop a system for an E1 line. -- Best Regards Shakeel Abbas