Displaying 20 results from an estimated 9000 matches similar to: "Dahdi - alarm which clears itself - Should I care ?"
2011 Jan 11
1
Issue with Red Alarm with DAhDi
Hi!
I have an analog line connected to my asterisk and when I try to answer a call I get this
-- Starting simple switch on 'DAHDI/7-1' -- Executing [s at from-pstn:1] Answer("DAHDI/7-1", "") in new stack -- Executing [s at from-pstn:2] Playback("DAHDI/7-1", "vm-intro") in new stack -- <DAHDI/7-1> Playing 'vm-intro' (language
2016 Jan 05
3
Detected alarm on channel 3: Red Alarm
Hi everyone!
I have a Digium Card TDM410
But, it appear for me this massege
chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red Alarm
But my line is ok!
But sometimes it back
sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel 2
But it again back to red alarm.
What can be happen?
My lines is all ok! But when I put on Digium Card TDM410 is very inconsistent
2010 Sep 29
1
Weird Behavior with DAHDI
Hello,
I'm experiencing some weird problems on my server:
- 1) The following messages are filling up my logs:
[Sep 29 08:24:59] WARNING[7077]: chan_dahdi.c:2789 pri_find_dchan: No
D-channels available! Using Primary channel 140 as D-channel anyway!
[Sep 29 08:24:59] WARNING[7078]: chan_dahdi.c:2789 pri_find_dchan: No
D-channels available! Using Primary channel 171 as D-channel anyway!
2012 Jul 24
5
DAHDI problems
Is a normal functionality?
when I do
#dahdi_cfg -vvvvvv
In my Asterisk console shows this....
[Jul 24 13:39:08] NOTICE[30263]: chan_dahdi.c:9461 pri_dchannel: PRI got
event: HDLC Abort (6) on Primary D-channel of span 1
If I do this a lot of times...then
[Jul 24 13:39:20] NOTICE[30263]: chan_dahdi.c:9461 pri_dchannel: PRI got
event: HDLC Abort (6) on Primary D-channel of span 1
[Jul 24
2016 Jan 05
2
Detected alarm on channel 3: Red Alarm
Humm, if I put a filter in this lines, maybe back?
2016-01-05 12:36 GMT-02:00, Ryan, Travis <RyanT at oscarwinski.com>:
>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
>> bounces at lists.digium.com] On Behalf Of Vitor Mazuco
>> Sent: Tuesday, January 05, 2016 9:21 AM
>> To: Asterisk Users Mailing
2011 Feb 21
1
T1 PRI shows yellow/red alarm
We are running Asterisk version 1.4.23-1, libpri-1.4.9 and
zaptel-1.4.12.1 and two Digium TE220Ps. Debugs are set to 10.
We have a T1 PRI connected to the telco. Over the last 4-5 days, we
have getting Yellow/Red alarms coming from the T1 PRI. The other two
ports in use are connected to internal test switches (Avaya
Legend/Avaya Definity), and are not showing any errors.
2009 Apr 03
1
ISDN Timer T309
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
Hi everione,<br>
<br>
I'm make some test with pri timer T309. I'm using asterisk 1.4.23.1,
libpri 1.4.9, dahdi-linux 2.1.0.4 and dahdi-tools 2.1.0.2. But in my
tests, the timer fail with a telco
2009 Sep 28
1
TE121P Blue Alarm/Recovering
Hi All,
I have a TE121P card installed and since connected it to the PRI I keep
getting the Current Alarm as continually changing from Blue
Alarm/Recovering and Recovering.
The config I have is:
/etc/dahdi/system.conf
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
loadzone = cn
defaultzone = cn
/etc/asterisk/chan_dahdi.cfg
[channels]
Context=telco
2012 Nov 15
1
Detected alarm on channel 5: Red Alarm
Dear,
i using this scenario.
jitsi---> asterisk---->EPABX------> Local Telephone
when i am calling from jitsi to no 88 its giving this message and getting
busy tone.
== Using SIP RTP CoS mark 5
-- Executing [88 at myphones:1] Dial("SIP/sandeep-00000004",
"DAHDI/g0/88,20,rt") in new stack
-- Called g0/88
[Nov 15 09:53:54] WARNING[3169]: chan_dahdi.c:7536
2009 Apr 29
2
Something wrong with DAHDI signalling according to the CLI
I have Asterisk 1.4.24 en a Digium TDM410 with EC and with 3 FXO
modules.
When I plug one PSTN-line into a FXO-port I am able to receive calls on
this line and I can also make calls from an internal SIP-phone to the
external PSTN-network.
Still I am bothered about something that appears on the CLI when I do a
reload chan_dahdi.so :
asterisk*CLI> reload chan_dahdi.so
-- Reloading module
2010 Dec 05
2
HA8 cards and RED alarm
Hi,
I have 2 servers: one is running 2 B410P cards with 8 euroisdn lines
(mISDN) connected on it, everything runs fine.
I prepare a new server - HP 360 G8- with 2 HA8 cards each of them 1
module of 4 lines. Already had with this machine an RMA on both cards as
they was faulty and crashed the server.
What happends is that when I connect cables on the HA8 modules (those
cables are unpluged
2009 Mar 16
3
Asterisk 1.6 ReceiveFAX problem
hi,all
i have just set up asterisk 1.6.0.7 rc1 with spandsp 0.0.5 pre4 to ReceiveFAX, link to a E1 (DE410P) using dahdi
this can receive the fax from E1 successfully, but i see many error message in the log like this:
[Mar 16 09:24:38] ERROR[23540] channel.c: ast_read() called with no recorded file descriptor.
when i receive a 5 pages fax, i will see this error message over 200 lines.....
it
2009 May 26
3
Silly (??) question about chan_dahdi
Hi,
these are my first steps with DAHDI and I finally managed to get
asterisk to load chan_dahdi (after I found out, that I need libpri).
But how do I tell chan_dahdi on which isdn numbers it should react? I
haven't found a parameter like "incomingmsn" for chan_capi in the
documentation.
Thanks for your help,
Stefan
2008 Oct 10
3
Got event 17 (Polarity Reversal)...
Can anyone tell me what this message means?
Got event 17 (Polarity Reversal)...
I'm running DAHDI 2.0 with a TDM401 card. Asterisk version 1.6.0.
It appears that I get this Polarity Reversal each time an inbound call
hangs up. This results in another ring, but no one is there. It appears
as an unknown caller, but I believe its a phantom.
Thanks,
Jim
[Oct 10 12:47:54] NOTICE[6669]:
2010 May 28
3
DAHDI Help (made a cardinal sin :()
Looking for some help from the UK please. I backed up all my Asterisk configuration before re-installing the server from 32 -> 64 bit. Unfortunately I did not transfer the backup to another machine!!!!!
I now have a TDM400P that is not picking up the line. Can you see what I have done wrong when I have rebuilt the config please:
dahdi_scan
----------
[1]
active=yes
alarms=OK
2009 Dec 15
1
dahdi-channels.conf -v- chan_dahdi.conf
Some recent issues I had with hardware seem to come back to not
understanding two very similarly named files:
/etc/asterisk/dahdi-channels.conf
/etc/asterisk/chan_dahdi.conf
I've modified the chan_dahdi.conf to work now, but it would appear all I
needed to do was include dahdi-channels.conf in chan_dahdi.conf and the
problem would not have persisted? Is it me or is that a bit Monty
Python?
2011 Jun 14
2
Dahdi 2.4.0 and Squeeze
Hi,
I'm using a two-years old installation script for the first time on a
Squeeze (linux 2.6.32) platform.
For an unknown reason (might be an obvious one), Dahdi can't be loaded
anymore.
1. First of all, it seems /dev/dahdi content was previously (ie in Lenny)
owned by asterisk:asterisk (asterisk is run as asterisk).
Now it is owned by root.
Any clue about this ?
2. Secondly, I changed
2009 Mar 10
3
configuring channels for dahdi
after installing asterisk 1.4.23.1 and dahdi-linux-2.1.0.4 and at CLI> module load chan_dahdi.so receive the following:
signalling must be specified before any channels are.
CLI> Warning [4663]: chan_dahdi.c:11627 process_dahdi: Ignoring signalling
Error[4663]: chan_dahdi.c:10946 build_channels: Unable to reconfigure channel '1'
Error[4663]:
2018 Feb 15
2
Problem with DAHDI
Hi again!
I tried to attach two VoIP-phones to my new Asterisk 13.14.1 on a Banana PI
with Armbian/Debian 9.
First test was to call a test service that say the time. Works!
Second test was to record my voice and play it again. Works!
Third test was to call the other VoIP-phone. It does NOT work... :(
Then I noticed that, by starting, Asterisk says the following messages:
[Feb 15 18:42:54]
2010 Mar 08
3
dahdi not available in Asterisk
Hi All,
I must be doing something really stupid as I can't get DAHDi working in
Asterisk. It is loaded and working in Linux fine.
*CLI> module load chan_dahdi
Unable to load module chan_dahdi
Command 'module load chan_dahdi' failed.
[2010-03-08 14:05:34 CST] WARNING[26926]: loader.c:393
load_dynamic_module: Error loading module 'chan_dahdi': libpri.so.1.4:
cannot