similar to: Workaround for bug in Linksys Firmware 6.1.3(a) (or greater)

Hey, I'w got a problem (bug maybe?). I have recently got my Asterisk to work perfect and I'm not trying to setup some dial routes and get the system working as I wan't it to. Yesterday I was installing Festival and also did a "aptitude upgrade" on my Debian Unstable installation. After that the problem started. After some serious testing yesterday night and today I have

Hi, I have a strange problem. At a site where there are 20+ phones, there is one phone that cannot make outbound (to PSTN) calls. Each call is dropped after 20s with "no response to our critical packet". Calls to voicemail and internal extensions work fine. I understand that everything points to a NAT problem, but I don't understand how it could be because: 1) It does not affect

Sorry, I am resending this, I tried earlier, but I couldn't see it appear on the archives - apologogies if it appears double! -------------------------------------------------- My Sipura 3000 ATA died on me this morning. I had a Linksys SPA 3102 available which I would like to use as a replacement. Unfortunately, the SPA3102 is not able to register with the asterisk server - I am

I am having a hell of a problem trying to get a linksys pap2t to register with my asterisk from outside the LAN. I have tried every combination of NAT, outbound proxy, stun, specify external IP address etc and it just won't work. Here are the relevant details. In asterisk I have set the following. externip=my.ip.address localnet=192.168.0.0/255.255.0.0 nat=yes bindport=5060 here is the

I'm getting dozens of these at a very high rate: [Jan 20 09:15:27] NOTICE[16958]: chan_sip.c:12687 check_auth: Correct auth, but based on stale nonce received from '"" <sip:121 at gnat.com>;tag=as5f1a9480' [Jan 20 09:15:28] NOTICE[16958]: chan_sip.c:12687 check_auth: Correct auth, but based on stale nonce received from '"" <sip:130 at

It appears as though the 489 Bad Event response to the NAT keep alive event responds to the local address, instead of responding to the NATted address. This causes Linksys phones to go amber (no registration) after a short amount of time after placing calls. Turning the Linksys NAT keep alive off is a workound, but non-ideal in may situations. Apparently the asterisk devs don't even think

Surely there must be someone here who can help me with this problem. I have spent weeks trying to get this damned service to work with no luck. I have incoming calls working, but no outgoing. If get outgoing working then incoming don't work. I have sent this problem to this list a couple of times with little or no response, and I _really_ need some help to sort it out. I have an asterisk

Hi all, There is a parameter called "nonce" included in every register request that a UA sends to asterisk. I have read sip debug a lot and only found out that the "nonce" parameter value which is used in register request was generated by asterisk server in a previous sip response. As you can see in the sip debug (labled in red). <--- Transmitting (NAT) to

I just updated one of my stable asterisk systems to head to test it out.. and I'm receiving a interesting log message now in asterisk.. Aug 2 13:20:56 NOTICE[15382]: chan_sip.c:5617 check_auth: stale nonce received from '<sip:3034585725@voip.livewirenet.com;user=phone>' (one line per registration) I'm using an AudioCodes mp108.. it worked fine with the latest stable..

I'm receiving the following error over and over, adnauseam: Oct 1 23:59:53 NOTICE[3194]: chan_sip.c:5890 check_auth: stale nonce received from 'CNAME-CID <sip:5551212@192.168.1.X>' Does anyone know what "stale nonce" is? Thanks! Paul Conn -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, Does anyone have access to version 1.00.07 of the Linksys WIP 300 firmware? The only version on their site at the moment is 1.00.09, which the phone refuses to load. Regards, Ilan

Hi, I am currently playing with DD-WRT and I like it. I am looking for something that is more "SIP Aware". Anyone know one those that are out there ? Thanks. Dovid -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071126/eb28ce44/attachment.htm

Does anybody know if the process of upgrading firmware on "Linksys SPA3102-NA" in Linux is the same as on Sipura 3K as described on voip-info.org http://www.voip-info.org/wiki/view/Sipura -- #Joseph GPG KeyID: ED0E1FB7

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> </head> <body bgcolor="#ffffff" text="#000000"> I have an Asterisk 1.4.18 with a mix of cordless phones connected using Linksys SPA2102 ATAs and Cisco 7940G

06.10.2015 1:22, Joshua Colp ?????: > On 15-10-05 05:58 PM, Dmitriy Serov wrote: >> 05.10.2015 23:24, Joshua Colp ?????: >>> On 15-10-05 05:22 PM, Dmitriy Serov wrote: >>>> Hello. Do I understand correctly that the current implementation >>>> res_pjsip does not support ZRTP? >>>>

Hi all, i have an * version: Asterisk SVN-branch-1.2-r45691, I need to register a linksys 922 phone thru internet and when I make sip debug command i see this debug information: -- SIP read from x.x.x.x:1024: REGISTER sip:mysipserver.com SIP/2.0 Via: SIP/2.0/UDP x.x.x.x:1025;branch=z9hG4bK-839856dc From: "SPA922" <sip:5403@mysipserver.com>;tag=685bbad1fae3325do0 To:

Hi, my dovecot installation works since months and clients authenticate using CRAM-MD5. But today I got the first chance to test an client that supports DIGEST-MD5 - and it doesn't work. Because of lack of other supporting clients and servers I'm now at the point I don't know which side is to blame. The error I get after the client answers the servers challenge is "-ERR

I am going to change my Digest realm to match my DNS SVR record. I dug through the code in chan_sip.c and on line 2748 I found it hard coded <frown> : snprintf(tmp, sizeof(tmp), "Digest realm=\"asterisk\", nonce=\"%s\"", r\anddata); I'm going to change this to : snprintf(tmp, sizeof(tmp), "Digest realm=\"isdn.net\",

Hi everyone, I'm trying to send a FAX with the following configuration: Analog FAX machine (OKI) <----->SPA21000<----->LAN<----->Asterisk<--------> PSTN I'm restricted to use passthru mode for faxing, instead of T.38 protocol, because the Asterisk box is running v1.2 and cannot be changed as it is in a heavy production environment. Anyway, it "should"

Hi masters! I've this Asterisk 1.4.15 running. yesterday I had to change the firewall schema that I had before. I use to have a FW that would be my network FW/Proxy and do the NATs for Asterisk. This FW was receiving too many requests from my LAN and it was making the Asterisk 'cut' the calls or reach very high latency. Yesterday I added a new FW just for this Asterisk. The same