similar to: IAXmodem in dialplan

Can anybody point me in the right direction please? I'm having some issues getting iaxmodem and hylafax to talk to each other. I have no doubt that someone has had this type of issue before but I can't find anything useful in the archives or on Google. Under RH9, with chan_capi 7.1, Asterisk 1.2.24, with an AVI Fritz ISDN2e BRI card all working perfectly... I've downloaded and

I am testing out hylafax and iaxmodem. Submitting jobs to the hylafax server and having it then dial using iaxmodem is working fine. Hylafax server is talking to my Asterisk box that has a Sangoma A101 in it via iaxmodem via an IAX channel using ulaw. A call coming into a certain test DID comes into the Sangoma A101 then it goes to another box via IAX ulaw that uses the rxfax app to

I'm running into a strange issue with Asterisk + Iaxmodem + hylafax on the same machine. After rebooting the iaxmodems don't register to asterisk. Stoping and starting the relevant services gets it working, but what is the point of using init scripts if it does not work right? I already tried to adjust the init scripts in /etc/rc3.d so I have: S50asterisk s90iaxmodem S95hylafax So it

I have setup hylafax today, along with iaxmodem. I'm just starting the debugging process and see the following message every 60 seconds: [Feb 19 17:44:16] NOTICE[1996]: chan_iax2.c:6021 update_registry: Restricting registration for peer 'iaxmodem0' to 60 seconds (requested 300) Can someone tell me what this means? Why is it there? And how do I get rid of it! Thanks, MD

Hi, I'm sending twice the same file using Hylafax's sendfax app. The first time I'm "dialing" a DID attached to the ReceiveFAX application. The second time I'm dialing an internal extension attached to the same ReceiveFAX application : 1. sendfax/hylafax/iaxmodem ----> asterisk ----> dadhi ----> dahdi ----> asterisk ----> spandsp 2.

faxguy, maybe you can tell me why As I've noted in previous posts I'm evaluating HylaFax with IAXModem. When I run iaxmodem and faxgetty through a console the modem works 100% I have yet to find a fax that it won't tie up with. When I run IAXmodem and faxgetty in initttab, the modem is extremely slow to respond and only actually does anything about half the time, the rest of the time

Hi, I have a question: In my company a have a 100% IP Telephony implemented (Cisco Phones, Routers, Switches, etc). We are connected to our operator by two E1 lines. The PBX is on operator side (a H.323 Gateway is configured on call manager). I study the possibility to implement a Hylafax server. In some sites I read that with the IAXmodem is possible to have virtual modems, with don't so

A few weeks ago, I lost my Trixbox that was all set up with Hylafax and IAXmodem. I am trying to set it up for email > procmail > faxmail > iaxmodem > asterisk >sipext > ATA (with attached fax). I have followed all the instructions on creating the IAX extension and configuring the IAXmodem config file. I can see the connection in Asterisk: iax2 show peers Name/Username

Hi! from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5. I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed. In Asterisk I set up an IAX trunk in this way: ___________________________ iax.conf [iaxmodem] type=friend context=outgoing-fax disallow=all allow=ulaw username=iaxmodem secret=password

hi folks. i'm experimenting with iaxmodem + hylafax using DID to determine where to send the fax to it's final destination. however i have difficulties passing the DID information from iaxmodem to hylafax. in extensions.conf: exten => _XXXX,1,Dial(IAX2/iaxmodem0/${EXTEN}|20|r) exten => _XXXX,n,Dial(IAX2/iaxmodem1/${EXTEN}|20|r) exten => _XXXX,n,Busy exten => _XXXX,n,Hangup

In trying to get the asterisk and faxing working I had to resolve to using iaxmodem and hylafax. I have incoming working, but outgoing the other fax rings but it would appear from web searches that the fax signals are too low to be "heard" I can read about rxgain and txgain for zapata. my fax setup goes direct from aterisk <-SIP-> SIP Provider <- Fax Machine -> It never

can anybody help me to choose the most reliable fax solution for * . after googling the net i found that there are at least two solutions for this, app_rxfax+spandsp and iaxmodem+hylafax. - what's the differences between these two? - which one's better? why? thanks

Hi, we have a faxserver with Asterisk, IAXModem and Hylafax. Faxes come from a SIP trunk to Asterisk, then are forwarded throught 5 IAXModems managed with Hylafax. Hylafax users can also send faxes to these modems and Asterisk send them throught the SIP trunk. We also have a dedicated modem used only for sending faxes coming from an Hylafax dedicated user. Sometimes Hylafax reports that a modem

Hi, I'm trying to receive faxes using hylafax / iaxmodem but I just can't get it to work. We're using Sangoma E1 cards and have calls coming in over PSTN. I've tried turning hardware echo cancellation off but it makes no difference. This is what I get in /var/spool/hylafax/log: [root at faxhost log]# cat c000000003 Jan 14 12:44:43.39: [ 3403]: SESSION BEGIN 000000003 18005551212

I see a lot of attempts by hackers to call 00972595301123? or 011972595115207? or variations but that same 972595 is often present. Can someone break down that dial string with an explanation? The 011 look like an overseas call (from Americas), while the 972595XXXXXX is unclear... -------------- next part -------------- An HTML attachment was scrubbed... URL:

We've deoplyed a number of pure VoIP wireless (wifi & proprietary) phones, but not dect. Is there a simple overview of integrating DECT phones with Asterisk somewhere? I assume the DECT basestation has a multi-account SIP VoIP interface, and the handsets are just plain old dect? Can you push configuration info to individual phones? (Are they individually addressible / configurable

I have all three running on the same box. I say OT because it appears asterisk is doing it's job just fine. It must be an IAXmodem or faxgetty (hylafax) problem When faxes work, they look great. I have ten IAXmodems setup with different ports and they register fine. I have ten faxgettys that startup fine. I start the IAXmodems and then faxgettys in inittab. They are setup as a roll

Hi i use now iaxmodem for receive fax and that's work very good with Hylafax ;=) Do you know if we can sent fax using iaxmodem and Hylafax ? when i test: d?c 13 13:47:21.12: [13725]: SESSION BEGIN 000000014 330426690268 d?c 13 13:47:21.12: [13725]: HylaFAX (tm) Version 4.3.0 d?c 13 13:47:21.12: [13725]: SEND FAX: JOB 2 DEST 0426690268 COMMID 000000014 DEVICE '/dev/iaxmodem1' FROM

I think I'm very close to getting IAXModem and Hylafax going, but my current inbound hylafax logs show this: Feb 23 10:09:37.98: [ 3638]: MODEM <Empty line> Feb 23 10:09:37.98: [ 3638]: MODEM TIMEOUT: waiting for v.21 carrier Two questions - 1) Does anyone know what step I missed here? (I.e. please help!) 2) Is there a document I should be working off of? Google doesn't seem to

When I have HylaFAX answer a call redirected to the fax extension in Asterisk when it detects CNG, Asterisk hangs up: Jan 30 14:32:59 VERBOSE[1098]: -- IAX2/ttyIAX0552/12 is ringing Jan 30 14:32:59 VERBOSE[1098]: -- IAX2/ttyIAX0552/12 answered Zap/23-1 Jan 30 14:32:59 DEBUG[1098]: Ooh, voice format changed to 8 Jan 30 14:33:01 VERBOSE[1098]: -- Channel 0/23, span 1 got hangup Jan 30