similar to: SIP: match_auth_username=yes doesn't seem to work

Hello, I have a problem with a cisco GW, if i only set g711 ulaw or alow as codec in my ata the the GW return a media not acceptable error. but If i add the g729 codec the all is ok. I see in the config of the cisco where to define codec for imcoming call but not for outgoing *Jul 17 15:57:02.604: Received: INVITE sip:0041787518551 at 192.168.0.110 SIP/2.0 Via: SIP/2.0/UDP

Hi, I follow different setup instructions and I can't make imap-hibernate work. I've tried vmail and dovecot as users, tried to set mode to 0666, without success. I'm using FreeBSD 11.2. Is imap-hibernate compatible with FreeBSD 11.2? My operational system: # uname -v FreeBSD 11.2-RELEASE-p9 #0: Tue Feb 5 15:30:36 UTC 2019 root at

I have an ethernet device in my lan with a primary address 192.168.5.205 and a secondary address .217. I added the secondary address after network startup established the primary address by an ip addr add command: # ip addr add 192.168.5.217/24 broadcast 192.168.5.255 dev eth0 # ip addr show ... 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether

https://bugzilla.netfilter.org/cgi-bin/bugzilla/show_bug.cgi?id=34 Summary: Redirecting udp packets to closed port gives bad icmp error Product: netfilter/iptables Version: linux-2.4.x Platform: i386 OS/Version: RedHat Linux Status: NEW Severity: normal Priority: P2 Component: ip_tables

Hi Dmitriy and others and thanks for your help so far. The option "match_auth_username=yes" seems to have had no effect. From my reading, this option will try to match the username of the incoming SIP account to a section heading. If that is how it must work then i can see a big problem. I'm trying to present the receptionist with a nice display of which line the call came in on.

I added a second network card with a new ip address that was say 11.11.11.11. I removed it and samba is still trying to reference it. This server is my domain master. I did not put in an interface parameter in my smb.conf so I am assuming this ip address was recorded as part of my domain master. Where would this ip address been saved? This server is also my PDC and winserver. Any

On 02/15/2018 04:49 PM, Joshua Colp wrote: > On Thu, Feb 15, 2018, at 7:46 PM, thelma at sys-concept.com wrote: > > <snip> > >> >> Thanks again for the hint. >> Here is the output from asterisk. >> >> The call is coming on Audocodes gateway from: pstn-4444 >> >> But asterisk display: >> Found peer 'pstn-9998' for

Hi, Andrew. You are trying to solve two tasks: definition through what line the call came and a beautiful display of this information. 1. definition through what line the call came. If the username and password for inbound and outbound registration the same, then try the following: a) delete "register" lines. b) add option "callbackextension=Company1" to Company1 friend

Hello. Asterisk 13.2. I transfer configs from chan_sip to res_pjsip. In chan_sip i have "match_auth_username=yes" and have nothing in pjsip. I have a lot of endpoints and registrations on same SIP server. And it's problem in pjsip now. Is not it? I requesting to add new value for endpoint option identify_by. The value 'uri'. Simple config (cutted): [siptrunk]

Hello all, I have an Asterisk server (Asterisk 10.12.4) with multiple sip accounts with the same service provides. We have 8 phone numbers in total. Incoming calls from the public are all correctly directed to appropriate office handsets. However, the display on the reception phone (the only one i care about) is always showing the same "SIP/Account1_0843214321" rather than the account

Solved it, kinda. It's not cute. I'm sure this is the way NOT to do it but it does work. For prosperity, the SIP service is through Internode. Here is my "extensions.conf" file: exten => s,1,Set(thedid="${SIP_HEADER(TO)}"); ignore this one exten => s,2,Set(pseudodid=${SIP_HEADER(To)}) exten => s,3,Set(pseudodid=${CUT(pseudodid,@,1)}) exten =>

07.03.2015 0:24, Kevin Harwell ?????: > On Fri, Mar 6, 2015 at 2:06 PM, Dmitriy Serov <serov.d.p at gmail.com > <mailto:serov.d.p at gmail.com>> wrote: > > Hello. > > Asterisk 13.2. > I transfer configs from chan_sip to res_pjsip. > In chan_sip i have "match_auth_username=yes" and have nothing in > pjsip. > > I have a

Hi, I seem to be facing an intrusion issue, inspite of firewall (script attached). What am I missing ?? Any suggestions / recommendation are welcome pls. Best regards, Sans -------------- next part -------------- #!/bin/bash echo 0 > /proc/sys/net/ipv4/ip_forward # Clear any existing firewall stuff before we start /sbin/iptables --flush # As the default policies, drop all incoming

Hi there!!! I'm returned to TINC :D I've got a question: I've setted up a server in a provider's NAT, and all users of this VPN are in the same provider's NAT... Well, I let the main server connect to all users, but... only the first ConnectTo works... in fact I've noticed that if the first user connects to another one, the last can connect to the server, while he

Hello, Asterisk seems to try to authenticate incoming INVITE based on the [section] in sip.conf and not the username specified. I just removed the "insecure" option from my sip.conf requesting every connection to be authenticated. I added the match_auth_username=yes in the [general] section for extra security. To make it work, I have to use the same [section] identifier as username.

On Fri, Mar 6, 2015 at 2:06 PM, Dmitriy Serov <serov.d.p at gmail.com> wrote: > Hello. > > Asterisk 13.2. > I transfer configs from chan_sip to res_pjsip. > In chan_sip i have "match_auth_username=yes" and have nothing in pjsip. > > I have a lot of endpoints and registrations on same SIP server. And it's > problem in pjsip now. Is not it? > > I

This is one of the chronic problems. Try this option in sip.conf: match_auth_username=yes Carefully read the description, it is better to test in "after hours". 02.04.2015 2:50, Andrew Galdes ?????: > Hello all, > > I have an Asterisk server (Asterisk 10.12.4) with multiple sip > accounts with the same service provides. We have 8 phone numbers in > total. > >

On Fri, Mar 6, 2015 at 3:46 PM, Dmitriy Serov <serov.d.p at gmail.com> wrote: > 07.03.2015 0:24, Kevin Harwell ?????: > > On Fri, Mar 6, 2015 at 2:06 PM, Dmitriy Serov <serov.d.p at gmail.com> > wrote: > >> Hello. >> >> Asterisk 13.2. >> I transfer configs from chan_sip to res_pjsip. >> In chan_sip i have

Hello again! I just got a SIP account and it seems - from a config on the net -, that I've configured it correctly. But I get no call to the outside. Registration was OK. I tried: channel originate sip/1/echo at iptel.org Application ... I see the channel active for a while, but no call gets established. In my config I have defined the section [iptel] for the outgoing call and I

HI ALL got small question i use call-limit=1 on peers but call limit is not working if user is not registered on PBX and making calls so the main question is -- how to Disallow CALLS without registering on PBX -- Best regards Antony tel. +380669197533 tel2. +380636564340 Paypal http://paypal.me/Satskiy