similar to: Caller id, sip header from problem

Hi all, I am using asterisk1.2.14,realtime and I find there is a strange case in the receiver's display. I have a dial plan to route a call to the destination. I haven't set the callerid(num) for the caller. In the receive ends, it's display shows "asterisk" when I make a call to the receiver. I wonder why "asterisk" shows in the display as I haven't set

I have an asterisk box at a remote location (which I will call remote), which registers to my local asterisk box (I'll call that one local), and uses that to route calls to the outside world. The problem I am having is that the remote location needs to lie about it's callerid sometimes, however if I set a callerid that matches the extension of another peer that exists,

George, I have the detailed log below. (Resending after trimming the email to 40KB.) The sequence below just repeats ad-nauseam. Is this a SIP trunk issue? Thanks! --------------------- Transmitting SIP request (885 bytes) to UDP:65.254.44.194:5060 ---> INVITE sip:12025551212 at 65.254.44.194:5060 SIP/2.0 Via: SIP/2.0/UDP 18.18.19.123:5060

On Sun, Mar 15, 2015 at 5:56 PM, Sonny Rajagopalan <sonny.rajagopalan at gmail.com> wrote: > George, > > I have the detailed log below. (Resending after trimming the email to 40KB.) > > The sequence below just repeats ad-nauseam. Is this a SIP trunk issue? > > Thanks! > I don't see anything obvious. The registration works though, right? You might want to compare

I don't think it's the snom, (the break key is set to "off") the "#" key is not being interpereted by the PBX as an attempt to initiate a transfer. Is this an error in my extensions.conf? Brian > >Message: 4 >Date: Wed, 15 Dec 2004 19:39:39 -0500 >From: Info <info@idatasys.com> >Subject: Re: [Asterisk-Users] Help with transferring a second call

Hello, I'm wondering why asterisk is not transferring the callerid to the sip device. Scenario as follows: sangoma <---> zaptel <---> asterisk <---> sip <---> SIP-Device zaptel is reporting the callerid, but in the sip packages the sip-address shows unknown as user part, as this sip debug package shows: Executing Dial("Zap/62-1",

I am not sure what you mean by the ful SIP signaling? Here is the trace for the sip.conf which works successfully. Below that, I will include the trace for the pjsip.conf which it seems Vitelity isn't accepting the ACK in response to the OK ---- SIP --- <--- Transmitting SIP request (1004 bytes) to UDP:64.2.142.93:5060 ---> INVITE sip:8005555555 at 64.2.142.93 SIP/2.0 Via: SIP/2.0/UDP

Hi All, Just added a Siemens DECT SIP/PSTN S450 phone to login to my A*k server, and I see "Got SIP response 405 "Method Not Allowed" back from 192.168.3.64" but the phone seems to work ok. Any ideas where it falls over in the SIP protocol? I've included this in the debug below. ubiphone*CLI> <-- SIP read from 192.168.3.64:5060: --- (0 headers 0 lines) Nat

Hello, I've got a problem with connection to my SIP provider. In general, everything works, but I get lots of these messages: Oct 17 19:10:06 DEBUG[29707]: chan_sip.c:11148 handle_request: That's odd... Got a response on a call we dont know about. Cseq 42710 Cmd SIP/2.0 Oct 17 19:10:06 DEBUG[29707]: chan_sip.c:11148 handle_request: That's odd... Got a response on a call

Hello List- I'm having a problem getting snom 190 phones to transfer a call to another local extension. Here is the scenario: A call (call1) comes in from the PSTN to (exten1). (via pri, if that matters) Another call (call2) comes in to (exten1). (call1) is put on hold while (call2) is answered. (call2) is then transferred to (exten2) using the "Xfer" button on the snom phone. This

Since I passed from version 1.0 to the 1.2.3. I have Pb with the callerid. If somebody call with presentation of the number all is well. If somebody make call in masked number, i couldn't send a callerid to the phone. It is in a call center and i use the callerid to present the name of the number called to the operator. Before that went. To identify the sda, I use the assignment of the

Hello, i have a problem with the hangup cause received from the AMI in the Hangup events. All calls that arent answered after ringing are returning hangup cause 16 (normal clearing) instead 19. Im running asterisk 1.4.11, the calls are generated to a SIP peer using the AMI originate command. This is the 'sip debug' output: Reliably Transmitting (no NAT) to 192.168.0.70:5060: INVITE sip:1

Hello list members, We're trying to get MWI notifications on our ATA device and we set it to send SUBSCRIBE messages to Asterisk, but it gets UNAUTHORIZED messages, despite the fact that we set the following lines in its settings in sip.conf: subscribemwi=yes mailbox=21 at from-extensions We need help in understanding how this works and what we are doing wrong. This is the SIP debug

The SIP trunking service that I am trying to set up keeps saying that my registration from Asterisk is invalid. Asterisk registration: REGISTER sip:{registration_ip} SIP/2.0 Via: SIP/2.0/UDP {asterisk_ip}:5060;branch=z9hG4bK5c2eb10c;rport Max-Forwards: 70 From: <sip:{registration_user}@{registration_ip}>;tag=as5579cc0c To: <sip:{registration_user}@{registration_ip}> Call-ID:

[general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to A realm=192.168.0.2 context = default ;Default for incoming calls [5549] disallow=all allow=ulaw allow=alaw allow=gsm type=friend ;(inbound and outbound calls accepted) secret=localphone ; obvious password for testing host=dynamic callerid=Jason White <5549> dtmfmode=auto mailbox=5549 ;(Asterisk VM-system's

Hello. I have a strange problem. Its not possible to pickup a call that was placed with a Siemens SL75 Wlan. When this phone calls an internal number and i try to pickup (*8) the call from my phone i get nothing. It seems i have the call for one second or so but after that the call is being cancelled. No problems with other phones (polycom, grandstream). Attached the complete sip debug log

I am having issues with transfers (SIP/REFER) using Asterisk 1.6. You will find the SIP debug below. There are three phones in this setup. 5253 and 5258 are Aastra 53i telephones, 101 is a standard phone connected through an Audiocodes gateway. All phones are registered in context "phones" and are set to not allow reinvites. All phones can dial each other directly. The dialplan

Arch x86_64 OS CentOS-6.4 (freepbx) Asterisk 11.4 FreePBX 2.11.0.4 Snom870 with FW-8.7.4.8 What I am attempting to do is to set a different background colour for the BLF vkeys when a station is set to DND. This is supposedly accomplished through this setting in the phones provisioning file: <vkey_blue perm="RW"> DND Blue.on Blue.pickup Blue.park Blue.message </vkey_blue>

Could anyone help me set up Asterisk in such a way that it makes SIP-SIP transfers using the REFER / NOTIFY method according to RFC-3515 ? SCANARIO: - Asterisk registers with PSTN<->SIP VoIP provider "V" (Vonage) as a friend - Asterisk is located in Europe, Vonage in located US. - Asterisk acts as an autoattendant located in Europe. - Asterisk answers and incoming call from

Fedora: Linux abcde 2.6.11-1.1369_FC4 #1 Thu Jun 2 22:55:56 EDT 2005 i686 i686 i386 GNU/Linux Asterisk: 1.2.4 SIP Problem 1. Asterisk sends SIP messages to Softphone. 2. Softphone receives SIP messages and replys back. 3. Asterisk doesn't receive these replies and keeps on sending. Asterisk: Reliably Transmitting (no NAT) to 192.168.1.4:5060: OPTIONS sip:192.168.1.4 SIP/2.0 Via: