similar to: Slightly OT: trying to mangle packets from Asterisk for a multiple ISP setup (reward)

Hi, is it possible to have 2 different ISP in one server? i have 2 NIC cards im going to config ISP1 in NIC1 and ISP2 in NIC2? what should be the configuration for this setup? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070412/4c62019f/attachment-0004.html>

Hello,I have single linux router ( fedora core 1 ), 2 ISP, 1 internal network,1 IP space from every ISP My scenario: eth0 1.0.0.2 netmask 255.255.255.252 -> ISP 1 eth1 2.0.0.2 netmask 255.255.255.252 -> ISP 2 eth2 1.0.1.1 netmask 255.255.255.0 -> IP space from ISP1 eth3 2.0.1.1 netmask 255.255.255.0 -> IP space from ISP2 Config I try: /etc/iproute2/rt_tables: 10 isp1 20 isp2 ip

Hello, Thanks for the great Shorewall which has replaced my hard to maintain home-made scripts. First, what works. Our local network is 10.48.X.X with multiple vlan, each on a dedicated interface. We use Shorewall 4.4.11 from Debian Squeeze. We have a 2 ISP: - isp1 : an optical fiber provider with 10 Mbps. - isp2 : a DSL provider with 15Mbits/1Mbits. We use isp2 as the default outgoing

I set up this config: +------+ -+ ISP1 +--+ +------+ | +-------+ +--+ linux | +------+ | +-------+ -+ ISP2 +--+ +------+ No problem. Standard setup with two ISP''s. Both routed subnets. Default gateway is ISP1. No magic here. Now I put a server behind the Linux box. I want the server to be reachable on an /extra/ IP in the routed subnet of ISP2. +------+ -+ ISP1

Dear all Lartc, I try to split my Internet access to my 2 ISP with 1 linux (GNU/Debian sarge) 3 NIC router, I want all my users conneted with ISP1 and just some IP connected with ISP2 Here is my configuration: Internal network: 10.117.71.0/24 Interface eth0 ISP1: IP for my linux box: 1.2.3.4/29 Interface: eth1 Gateway: 1.2.3.5 ISP2: IP for my

Hi, I have 2 internet nic''s with differents ISPs. eth0 = isp1 eth3 = isp2 My internal network is eth1 # /etc/interfaces net eth0 detect routefilter,norfc1918,blacklist net eth3 detect routefilter,norfc1918,blacklist loc eth1 detect # /etc/policy loc net ACCEPT net net DROP

I need to route: from 196.33.50.0/25 (default route) to ISP1 from 196.33.248.0/24 (default route) to ISP2 ISP1 --------- fire --+---- 196.33.248.0/24 / | ISP2 --------/ +---- router ----- router ----- 196.33.50.0/25 What I''ve done: Default route via ISP1 created routing table ISP2 for default route via ISP2 I would like to do the following but they get

Hi, I am migrating from one ISP to another, and would like to run both simultaneously for a while. So: (both netmask 255.255.255.248) [ISP1] 24.106.62.180 [ISP2] 209.181.237.230 | | | | \ / -----[ HUB ]----- | | -------- eth0 --------- | Linux FW/Server | ---------eth1 --------- | | [ HUB ] | 10.0.0.x/255.255.255.0 The default IP on

Hi there. Currently, our network design has two ISP lines and 3 subnets for LAN. Below are some details :- eth0 - isp1 eth1 - isp2 eth2 - subnet1 eth3 - subnet2 eth4 - subnet3 What i wanted to do is to assign incoming port 80 to our local squid server running on the firewall itself and assigned it to eth0(ISP1). I think it shouldnt be a problem as /etc/shorewall/rules provides a sample of the

Hi all, I have a similar question like many asked before I know but Please help as i cant figure out where the problem is and how should I tackle. I have 2 ISP connections. I want to share the bandwidth from both. I have copied the script from many places and created my own after changes. Problem is that only one connection is utilized at a time. Not both working. ratio of consuming

I''m trying to plan out a new configuration for our new multi-isp setup. Part of what is confusing me is the asymmetry between the two setups. Our current ISP provides us with a router and our first public IP is used by its LAN port. Our new provider is not providing a router and I want to user our shorewall box as the router. I have 4 ports on it (currently configured for local,

hi all, i have this situation: isp1 | dmz ----- FW linux ----- isp2 |----------------------------------- vpn concentrator ----- various ipsec lan-2-lan | LAN In lan i have "pc zone" and "server zone", same network. Dmz and server zone browse internet through isp1, lan use isp2, and remote

Hi; I have two dsl lines, which the low bandwidth connection(ISP2) is only used for failover. My setup is showed below; \ ISP1 \ / \ ____/NAT My internal net |-----|___| / \NAT / \ / ISP2 However, my interfaces which these lines are connected are both

I''ve just started to recently look at CBQ and HTB, but I''ve been wondering whether or not something like the following is possible: I''ve got two external links: +--+ | |-----ISP1 |FW| | |-----ISP2 +--+ One link has a bandwidth cap, and the other doesn''t. What I want to do is, punt all outbound traffic out via ISP1

Hello everybody: Here is my "network layout": ISP1 ISP2 | | | | +-----eth0---------eth1------+ | | | FC 3 box | | | +-----eth2---------eth3------+ |

Ok folks, here goes.. I have been boggling with a problem for the past week, and still haven''t found a solution.. I''m trying to route traffic from two providers through a Linux machine. But that is not the problem. The ISP''s have provided me with a WAN IP class for both of the lines, to be routed into a DMZ where the machines a to respond to their respective

hello, i have 2 links to the ISP of 128kbit each, and i want to balance the trafic between them, but not staticly (local ip1-5 throw isp1, and the rest to isp2). I though at a ingress clasification, then routing by the mark, and at the exit nat (yes i must do nat :(((, but the clasification must be flow based, and i dont know how to do it. C _______________________________________________ LARTC

Dear list, Shorewall is running here with 2 ISP''s: ISP1: corporate ADSL-line with fixed set of IP''s ISP2: fast consumer-grade cable-connection with higher bandwidth All our main traffic (web, e-mail) is routed trough ISP1. Only for special purposes (frequent large ftp-transfers) ISP2 is used, configured trough tcrules. ISP2 is not so reliable as ISP1 (duh) and they sometimes

Ok ive been trying to get this to work for about half a year now. Ive searched all over the internet for a solution for my problem. Ive found some solutions, but they only led me to yet more problems. What we want to do is the following: I live in a student complex with 7 other people. Every room has its own internet connection from the same ISP. Ip, gateway, subnet are asigned through dhcp on

Hello there, What is the hypervisor that hosts the VM? What does ifconfig show on it? Boris. On Mon, Nov 7, 2016 at 4:36 PM, Gordon Messmer <gordon.messmer at gmail.com> wrote: > On 11/06/2016 11:00 PM, Sean Son wrote: > >> How do I >> configure the networking so that both IPs are pingable and the VM is >> reachable via both IPs? >> > > > You need