similar to: Asterisk 1.4.31 IAX2/RSA BUG

Asterisk 1.4.31 IAX2/RSA BUG If "A" tries to register on "B" and the RSA key from "A" does not match the key on "inkeys" on "B", "B" do not send a "REGREJ", instead it sends a "REGAUTH" with a new "CHALLENGE", then "A" send a new "REGREQ" for this "CHALLENGE" with the same wrong

The Asterisk Development Team is pleased to announce the first release candidate of Asterisk 1.4.26. Asterisk 1.4.26-rc1 is available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/ This release is primarily a fix for an issue (#14867, #14717) related to security fix AST-2009-001 where IAX was not sending REGREJ to terminate invalid registrations. Instead it sent

The Asterisk Development Team is pleased to announce the first release candidate of Asterisk 1.4.26. Asterisk 1.4.26-rc1 is available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/ This release is primarily a fix for an issue (#14867, #14717) related to security fix AST-2009-001 where IAX was not sending REGREJ to terminate invalid registrations. Instead it sent

I had a working 1.0.9 asterisk installation and tried to get a Firefly IAX phone to register, but it was failing. I upgraded to asterisk 1.2.5 and the PBX is working fine, but the IAX phone still won't connect. Below is my iax.conf and the output from setting iax2 debug while the phone tries to connect. Could somebody please give me some pointers? This doesn't seem to be a normal

Hi All, I'm having problem with IAX, I'm trying to connect to speex.co.il from asterisk using: register => username:password@speex.dyndns.org and I cant get it to work. Maybe someone who already got this to work will help... When dialing my speex extension I see the next output from consol: IAX2 Debugging Enabled *CLI> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno:

Hallo Did you allow udp outgoing on 4569 as well.. i found udp bit different than tcp when comming to firewalls liaan ----- Original Message ----- From: "Bartosz Wegrzyn - asterisk" <junk@lexon.ws> To: <timebandit001@gmail.com>; "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Monday, February 21, 2005 12:29

On the asterisk1 I got this: register => username:secret@ipaddress2 [eop] username=username secret=secret type=peer host=ipaddress1 auth=md5 on the second box I got this this host is ipaddress2 [incommingiax2] username=username type=user secret=secret host=dynamic context=from-internal-custom auth=md5 on first host 1 am getting: Jun 22 14:42:10 NOTICE[2398]: chan_iax2.c:7411

Is there any documentation on IAX RSA authentication because I followed http://www.voip-info.org/wiki/index.php?page=Asterisk+iax+rsa+auth and it's not working... Asterisk 1 : -r--r--r-- 1 root root 272 Aug 25 10:34 server2.pub -r-------- 1 root root 963 Aug 24 19:38 server1.key Asterisk 2 : -r-------- 1 root root 963 Aug 24 19:53 server2.key -r--r--r-- 1 root root 272 Aug 25 09:02

I know in advance maybe I'm overlooking something stupid, however I'm really lost and cannot find the solution... Situation: - asterisk-1.2.13 on a linux box with no iptables active. - one iax2 peer defined - one wildiax phone running on my laptop the soft phone is configured to connect & register on asterisk, however, I cannot get it working. What am I missing? Please help!!

Hi All, I am having trouble with receiving calls from FWD via IAX. I know this isn't a FWD support forum, but I suspect the problem is my asterisk setup. The problem is that I can dial out to fwd subscribers, even myself but they can't dial me using my FWD number. I don't know much about IAX, but it would seem to me like a registration problem, but I get no errors or warnings in

Greetings, DIAX seems to work well placing calls, but I can't actually receive a call . Here, DIAX (x305) "registers", then I use a sip phone to place a call to DIAX (which definitely is not in use by me at debug time, but it is idle on my desktop.I think), and then * goes to vmail. Here's the debug output: affinity*CLI> iax debug IAX Debugging Enabled Rx-Frame Retry[N/A]

Hopefully this is really a generic question about IAX and doesn't turn out to be something specific to Teliax, because they haven't been too helpful so far. All they can tell me is that my login shows "status unknown" on their end, which prevents me from receiving inbound calls on my Teliax number. Outbound calls through the same server work fine, which rules out most networking

Okay, I've read as much as I can, and I think i've followed instructions, but I'm still having problems with * and firefly... I can get outgoing to other freshtel working, but not incoming (I get the "not available" voicemail), or outgoing to landline. I'm using the debian asterisk package (0.9.1-RC1-4) My iax.conf has in general (under my FWD register, which

I downloaded iaxComm and get up my iax.conf file and the extensions.conf. Here is the out but from CLI in iax debug. What did I forget to do??? Rx-Frame Retry[No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ Timestamp: 00001ms SCall: 10489 DCall: 00000 [192.168.50.66:4569] USERNAME : 100 REFRESH : 300 Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type:

Good morning, I am trying to use the Windows iax client. My iax.conf looks like this: [general] port=5036 bindaddr=10.1.3.111 bandwidth=high allow=gsm ; Always allow GSM, it's cool :) tos=lowdelay [pos| type=friend context=default auth=plaintext secret=pos deny=0.0.0.0/0.0.0.0 permit=10.1.3.0/255.255.255.0 host=dynamic defaultip=10.1.3.2 In the registrations dialog

For some reason, starting just today, 1 out 3 of my asterisk servers is having issues calling 1 other server. The only issue I see is that when it registers with the problem server it is using port 1027, not 4569. ie: Registered to 'Server 1', who sees us as 'Server 2':1027 Server 1 then proceeds to timeout trying to register with Server 2. The way I have each server registering

Does the MWI feature work with IAX2? I have read where it should but cannot get the indicator to work on any of the IAX softphones that I have tried which have this feature. I even did an IAX debug and did not see where and indication was sent to the phone when it registered. IAX2 registration session: *CLI> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ

Hi everyone, THis is my second thread regarding the issue.(before I was having problems with accessing my email, which slow down my responses, sorry for that) My setup looks like this Firewall | | Asterisk---Asterisk (two asterisk servers with the same setup for high avail) | | phones Ports 5060, 10000-20000, 4569, 5036 are forwared to 192.168.1.251 which is virtual ip address on one of the

I'm new to this list, and I apologize if this is an already answered question, but my Google-fu was not strong enough to find the answer if it was. I'm having a problem with DTMF on incoming IAX calls. For the first few seconds of the call (between maybe 1 and 15, it varies from call to call) everything works fine. After that I continue get DTMF_E messages from the remote IAX server

Hi, My termination with sixtel stopped working, is it something I did or anybody else is having the same problem. I am attaching log: *CLI> -- Executing GotoIf("SIP/300-fbe0", "1?4") in new stack -- Goto (macro-dialout-default,s,4) -- Executing GotoIf("SIP/300-fbe0", "1?6") in new stack -- Goto (macro-dialout-default,s,6) -- Executing