similar to: asterisk-users Digest, Vol 70, Issue 63

Hi, We are using Vicidial and sometime even when agent disconnects, outgoing call originated by dialer is still active. Since call was initiated by dialer and then bought into meetme conference of agent and we can't corelate this call to any agent channel. When agents are dialing, channels doesn't show calls vicidial2*CLI> show channels Channel Location

My Inbound calls lands , but line get disconnect in exactly 3 secs. Here goes my extension.conf setting : [from-ipkall] exten => 901835,1,Ringing ; call ringing exten => 901835,2,Wait(1) ; Wait 1 second for CID delivery from PRI exten => 901835,3,Answer ; Answer the line exten =>

Hi, On Tue, Mar 03, 2020 at 11:10:52AM +0100, Karol Herbst wrote: > Fixes state transitions of Nvidia Pascal GPUs from D3cold into higher device > states. I think it is good to explain bit more here why this fix is needed. > v2: convert to pci_dev quirk > put a proper technical explanation of the issue as a in-code comment > v3: disable it only for certain combinations of

Hello, I'm using samba 3.5.11 to connect a Windows 2003 Active Directory. With cups, samba is an part of a print server used to print to windows desktop shared printers. DNS are Active Directory Integrated. Network is both IPV4 and IPV6, IPV6 for Linux and Windows Vista and above. Some times, some users are not able to print. In logs of cups, I see to thinks "Unable to connect CIFS

Dear R heleprs   Suppose I have following data   Scenarios combination_names     series1    series2 Sc1 MAT2 GAU1 7.26554 8.409778 Sc2 MAT2 GAU2 7.438128 8.130275 Sc3 MAT3 GAU1 8.058422 8.06457 Sc4 MAT1 GAU2 8.179855 8.022071 Sc5 MAT3 GAU2 8.184033 8.191831 Sc6 MAT3 GAU2 7.50312 8.232425 Sc7 MAT1 GAU2 7.603291 8.200993 Sc8 MAT1 GAU1 8.221755 8.380097 Sc9 MAT3 GAU2 7.904908

Hi I want to overlay my raster and its boundary which is a shapefile. When I used thise code separately, all is ok: # Open raster >Image<-read.table("C:\\Users\\Documents\\Nouveau\\Frequence.txt",sep="",dec=",",header=TRUE) >testo<-rasterFromXYZ(Image) >plot(testo) >testo2 <- aggregate(testo,fact=10, fun=mean) >plot(testo2) # open

On Wed, Mar 4, 2020 at 10:33 AM Mika Westerberg <mika.westerberg at intel.com> wrote: > > Hi, > > On Tue, Mar 03, 2020 at 11:10:52AM +0100, Karol Herbst wrote: > > Fixes state transitions of Nvidia Pascal GPUs from D3cold into higher device > > states. > > I think it is good to explain bit more here why this fix is needed. > is something like this fine?

Hi, I'm trying to call a SIP server while providing the SIP server username/password in dial string but it's not working ... Dial(SIP/gs102:test at 192.168.2.81); User on sip server (192.168.2.81): [gs102] disallow=all allow=ulaw allow=alaw type=friend username=gs102 secret=test host=dynamic dtmfmode=inband defaultip=192.168.2.1 qualify=1000 mailbox=102 context=context-gs102

I figured out something new that I would like to see if I can do this more easy with R then Excel. I have these huge files with data. For example: DataFile.csv ID Name log2 1 Fantasy 5.651 2 New 7.60518 3 Finding 8.9532 4 Looeka -0.248652 5 Vani 0.3548 With like header1: ID, header 2: Name, header 3: log2 Now I need to get the $ID out who have a &log2 value higher then 7. I

Dear R Users , As a beginner in QP, I'm trying to solve a Support Vector Machine problem by a QP. In particulare I am using the quadprog package. My questions are here: 1- In the document for the package (The quadprog Package), the inequality constraint is mentioned with >= , however in a standard QP, this usaully is written with <= . This constraint should be multiplied by a

Andreas Jellinghaus wrote: > Hi Edward, > Hello. > I saw your mail on btrfs ml with the grub patches and the notes > how to deal with btrfs. > > can you explain how grub and btrfs work exactly? > I read the grub manual at > http://www.gnu.org/software/grub/manual/html_node/Bootstrap- > tricks.html#Bootstrap-tricks > > so I wonder: does btrfs provide a

Error when openning MS Office files (*.doc, *.xls, *.ppt) (Wine 1.0.1 and Wine 1.1.42, Ubuntu 10.04) -- Hello, I get this error when I try to open MSOffice 2003 files (like *.doc or *.xls or *.ppt): "The file '/home/blabla/Doc1.doc' is not marked as executable. If this was downloaded or copied form an untrusted source, it may be dangerous to run. For more details, read about

Fixes state transitions of Nvidia Pascal GPUs from D3cold into higher device states. v2: convert to pci_dev quirk put a proper technical explanation of the issue as a in-code comment v3: disable it only for certain combinations of intel and nvidia hardware v4: simplify quirk by setting flag on the GPU itself v5: restructure quirk to make it easier to add new IDs fix whitespace issues

Hm really. Then you should have a look also at your krb5.conf file. Section : [libdefaults] default_realm = Best regards, Louis > -----Oorspronkelijk bericht----- > Van: Thamm, Russell [mailto:Russell.Thamm at dst.defence.gov.au] > Verzonden: donderdag 13 juni 2019 9:35 > Aan: samba at lists.samba.org > CC: L.P.H. van Belle > Onderwerp: RE: [Samba] Problem

UNCLASSIFIED Hi Louis, I will make the change. This is what SAMBA gave me when I joined the domain. Cheers Russell -----Original Message----- From: samba [mailto:samba-bounces at lists.samba.org] On Behalf Of L.P.H. van Belle via samba Sent: Wednesday, 12 June, 2019 6:33 p.m. To: samba at lists.samba.org Subject: Re: [Samba] Problem joining domain [SEC=UNCLASSIFIED] I migth be picky in

[Sending the question to the proper mailing list] On Thu, Oct 01, 2015 at 10:50:13AM +0100, slim tabka wrote: > Hello Mr Richard Jones, > > First of all, thank you for the amazing tools that you are creating. > I'm new to the virtualization and libguestfs ,so I'm hoping you can help me > to at least understand what's the problem I'm having exactly or to know if

Hello, I've installed VICIDIAL per the instructions on the astGUIclient website. It appears everything is working correctly. All the conference rooms have been set up, the database is running, and all the astGUIclient/VICIDIAL scripts are running. I'm using the VICIDIAL client on windows 2000, and it also appears to be working correctly. I can log in with no problems with the user

I am evaluating RubyMine but am getting the following rake issue... C:/Ruby192/lib/ruby/1.9.1/rubygems.rb:340:in `bin_path'': can''t find executable rake for rake-0.8.7 (Gem::Exception) There are many web pages (through Google) that discuss this, and several recommend applying a patch and link to a .patch file (0001-version-bundled-gems-during-installation.patch). This file opens

Hi the devel list. I am adapting the package.skeleton to S4 classes and methods I would have been very proud to post a new working function on this list. Unfortunately, I do not manage to solve all the problems. Mainly - sys.source does not compile a file with setClass - dumpMethod does not exists yet In the following code, thise two problems are notified by a line ################# Still

>Hi, > >I initially tried a RedHAt Linux 9.0 box to join in multiple domains, but >couldnt get it right. >Now I have two Win2K Domains A and B. >If I configure samba to be in Dmain A, I am able to see and browse the linux >box without any problems. >But if I change the workgroup to Domain B I am not able to see the machine >in that lbrowse list and nor am I able to acces