similar to: Dead air between answer and packet2packet bridge (Bug 12708?)

I have a trunk set up for the DID from my provider: [my_provider] type=registration outbound_auth=my_provider server_uri=sip:sip.example.com client_uri=sip:my_username at sip.example.com retry_interval=60 [my_provider] type=auth auth_type=userpass password=123456 username=my_username [my_provider] type=aor contact=sip:sip.example.com:5060 [my_provider] type=endpoint context=from-my_provider

Hi, I have Asterisk set up on Fedora with a single SIP trunk, with a few handsets configured. The Asterisk box has both public and private addressing, so "canreinvite=no" is set on both the SIP trunk and handset configurations so I can get around the nasty NAT issues. One odd behaviour I am seeing is certain destinations are resulting in different SIP codes being sent back to Asterisk,

I'm just starting to upgrade some boxes from 1.2.x to 1.4.1 as well as trying to get some of the RTP traffic offloaded from the network. I think I'm misunderstanding what the console messages mean when it says "Packet2Packet Bridding SIP/blah to SIP/blah". I though that meant that it had successfully (re)INVITED and the media was no longer going through my Asterisk

I'm sorry, i send mail in asterisk-bug, but asterisk-users is better for my problem Hello, During a call with canreinvite = no, at the beginning of the call I lose 2 seconds of audio. is obvious when I call autoattendant. schema: SipPhone --> Centrex (asterisk 1.4.24.1) --> Voip1 (Asterisk 1.4.24.1) --> Operator SIP capture of voip1: - Executing [0825387205 at

Dear concern, I want to configure packet2packet bridging in asterisk. How could I do this any of the tutorial or instructions will help ? I found the setting the canreinvite=yes will do the stuff but it is not working I am using asterisk 12.3 version I am very new to asterisk please help me in doing the same. Thanks in advance. -- Regards Sameer Rathod 8109413462 -- Regards Sameer

I have put canreinvite=no for all my internal SIP-clients in sip.conf because I want Asterisk to be in the middle of the RTP-stream so he can provide MusiconHold and so... Now, what the Asterisk CLI tells me when I make a call from my one internal SIP-phone to another internal SIP-phone is : Verbosity is at least 25 == Spawn extension (intern, 51, 1) exited non-zero on

Hi, I am new to asterisk I want to configure my asterisk server such that it only establishes the call rest the audio must bypass the server and transmitted directly to the peer In my config file I did changes which are below canreinvite=yes nat=force_rtp dirtectmedia=yes directsetup=yes I am using asterisk version 12.3 -- Regards Sameer Rathod 8109413462 -------------- next part

I thought it was quite easy to implement but I cannot get one-touch recording to work. Here are the changes what I did: I restarted Asterisk after the change (because reload does not work for changes in features.conf). I press *1 on the Polycom IP600 phone to record a conversation but no new wav file appear in /var/spool/asterisk/monitor or elsewhere. Test A: Outside line calling in

Hi list, Can someone please explain how to get one touch recording (automon) to work reliably? I'm using Asterisk 1.4.14 on a Debian etch system. My current configuration includes the following settings: In /etc/asterisk/sip.conf: [2000] ; Siemens Gigaset S675 IP wireless SIP phone. type=friend secret=1234 context=phones-j dtmfmode=rfc2833 qualify=yes

I have got call recording working on our 1.4.30 asterisk box together with a recording pause ability and being able to play different audio to each party at the start and end of the pause. This all works perfectly but one wish is to have the audio files have a beep or something in them so when you listen later you can tell where the audio was paused. So I changed things around so that instead

Hey guys Is it possible to record with mixmonitor straight into mp3. I am trying to reduce disk space and want my calls to be recorded in mp3 Instead of wav. Sent from Samsung Mobile <div>-------- Original message --------</div><div>From: Sameer Rathod <sameer at hostnsoft.com> </div><div>Date:30/06/2014 9:23 PM (GMT+02:00) </div><div>To:

Hi, I have a Intel Xeon Dual Core server, with 3 GB RAM, running Centos 5.0, Asterisk 1.4.4 and mysql 5.0. It is a kinda high-traffic box, with about 60 concurrent calls. The profile of calls on this box are: Incoming: via a Sangoma A101 via SIP from anothjer SIP server Outgoing all calls that come in are sent out via SIP to yet another SIP server. This morning I has this error: (edited)

This was a bug 1.4.4 It has now been fixed in Asterisk 1.4.5 Stuart Bennett wrote: > Hi Yusuf > > A friend of mine had the same problem with a high volume site.. The problem > lies with a limitation in Linux. Linux will only allow a certain amount of > open files at a time. You will need to add the following line before running > asterisk. > > ulimit -n 32768 > >

Problem with this is client needs to listen to the call recordings and my interface will only display .wav or .mp3 so they will moan if they have to wait until the next day for today's recordings Sent from Samsung Mobile <div>-------- Original message --------</div><div>From: binary <dreamer.binary at gmail.com> </div><div>Date:01/07/2014 6:09 PM

Currently using tikal crystal call recording Do you guys know of any better ones? Sent from Samsung Mobile <div>-------- Original message --------</div><div>From: binary <dreamer.binary at gmail.com> </div><div>Date:01/07/2014 6:33 PM (GMT+02:00) </div><div>To: asterisk-users at lists.digium.com </div><div>Subject: Re:

Hi All, While reading about QoS, I came across ${RTPAUDIOQOS} and tried to use it in my dialplan. I had 2 sip extensions 555 and 666 and I called from 555 to 666, but unfortunately no value for ${RTPAUDIOQOS} appeared on Asterisk CLI. Would you please let me know what is wrong with my dialplan and/or what else should be done to get the value of ${RTPAUDIOQOS}? Following is my dialplan context

I am running 1.4.22. I am doing a simple call into the dialplan and am getting a strange error: [Nov 3 08:32:27] NOTICE[8022]: chan_sip.c:14316 handle_request_invite: Failed to authenticate user "404" <sip:404 at 192.168.1.8>;tag=547521CB-DB0D6130 This is the only line that prints on the console... Typically I get a few lines like: -- Executing [33 at smvoice-sip:1]

Hello list, i need help. My problem is that when I want to call (using ISDN phone or internal SIP client) via the Sip provider a real phone number (ISDN phone or internal SIP Asterisk >> SIP ), I get a ring tone. When I now decide to hang up (e.g. if nobody answers), the called telephone continues to ring almost forever. the sip.conf: [2563105] accountcode = 2563105 username =

I'm still struggling to pickup calls. I now have a single context (entryocginternal) where I have "include => parkedcalls". The log below shows me calling from one internal extension to another, then picking up, then parking the call. -- SIP/239-0915d5c8 is ringing -- SIP/239-0915d5c8 answered SIP/233-0915bf40 -- Packet2Packet bridging SIP/233-0915bf40 and

I'm trying to setup my first Asterisk setup on a CentOS 5 installation on VMWare Workstation 6. Got two Linksys SPA941s working fine. But X-Lite softphones can't answer phone calls, and when one of them calls on of the Linksys phones they "connect" but neither party can hear hear the other. I noticed that the Linksys phones are connected via Native bridging while the