similar to: How to have Asterisk respond from the IP address used for registration

Hi all I feel like I should know the answer to this question, like I read it someplace sometime, but it evades me right now. It's also an opportunity to say hello to the list and many thanks for writing and supporting tinc vpn! We make great use of it at rhizomatica. So, Let's take this example setup. I have two tinc nodes (A and B) behind a firewall NodeA and NodeB have 192.168.1.2

Hi, I'm still on 1.4 and am wondering if 1.6 would fix an issue for me. Specifically, I have been given the impression that, in contrast to 1.4 which always sends packet from the default IP (if the server has multiple IPs), 1.6 sends packets back from the IP address that was used by the peers. i.e.: On a server with two NICs: eth0 192.168.1.2 eth1 192.168.1.3 If a peer registers

Hi all I have just got a P2000w and experience several problems. Hopefully there is someone out there that has got it working. I saw it on Cebit and the person demonstrating it there told me that it was connected to an Asterisk server on the stand -so it should work. Problem 1: it does not register correctly It get lots of messages like this: Jun 26 19:45:19 NOTICE[1107585968]: chan_sip.c:5630

On Mon, May 22, 2017 at 11:03:30AM +0200, Keith Whyte wrote: > I have two tinc nodes (A and B) behind a firewall > > NodeA and NodeB have 192.168.1.2 and 192.168.1.3 assigned on an internal > LAN, and they both have different public IP addresses forwarded to them, > port 655 udp/tcp > > I would like any given node in the C-Z group to be able to find Node B > on it's

AFAIK, and my setups thus far, unless you have NodeB’s public key in Nodes C-Z (with NodeB’s public/reachable IP configured in Nodes C-Z) *and* you have the PublicKeys for NodesC-z configured in NodeB, there is no way that NodesC-Z will be able to establish a connection directly with NodeB, and it’ll have to forward via NodeA (or any other node that do have a direct connection established with

Hi, Thanks to all in advance, In recent I need policy based routing on my Linux2.4.3 box. requirement is like to give access of Internet to some computers while this facility is not available to rest people (That is based on MAC address only). My existin routing in "table main" is... 192.168.1.0/26 dev eth0 proto kernel scope link src 192.168.1.3 192.168.1.64/26 dev eth1 proto

Hi, I'm having this problem with load balancer. I already setup the load balancer and two servers behind it with this kind of topology ----------------------------------------------------- request -> DIRECTOR -- Server 1 \ Server 2 ----------------------------------------------------- DIRECTOR's (RHEL 5) Virtual

I have several computers connected to the internet through a DSL router that assigns rfc1918 (192.168.1.x) addresses to the systems connected. I have a server where shorewall is installed with one interface eth0, with a static ip (192.168.1.3). The router is configured to forward all connections from the internet to the linux server. I''d like to know how I can configure shorewall to

On a machine with virtual networking is enabled and two ether net controllers eth0/192.168.1.2 and eth1/192.168.1.3 and having SAMBA smb.conf set to: dns interfaces = lo br0 is there a chance for: 1) The system not to boot with DNS working 2) The DNS server bounce between eth0 and eth1 3) The DNS server portion work on boot sometimes on eth0, but when software restarted only work on eth1 or

I want to set up a cluster that is used for web hosting (RHCS cluster). Recently, I experimented with a 2 node cluster and was able to run it successfully. However, I have started facing some issues with Apache, which I had configured as a service using the Cluster configuration tool. To do this Apache needs a floating IP address. This address is in addition to the network interface IP address.

Hello Samba folks, I thought you might be able to help me. I have 2 machines, 1 is FreeBSD, 1 is win95. They can't ping each other, but the bsd box comes up in Network Nieghborhood when Samba is active. What's going on? Is it not possible to ping a windows machine from a unix box? They are on the same hub via UTP. IPs are 192.168.1.x and netmasks are same (255.255.255.0).

Hi I have my samba server (redhat) configured to use an external wins server. Each time samba starts up, it registers its netbios name with the wins server. So far so good. Then we wanted to deploy the samba box to a new location and new IP address. We changed the ip address in Linux in /etc/hosts, /etc/sysconfig/network & /etc/sysconfig/network-scripts/ifcfg-eth0. When samba restarts

Hi, I'm trying to configure a natted budgetone phone to a asterisk server as described in wiki using port forwarding. I successfully make call from the client but it seems it does not register the client ip address and when I try to recall it is not reacheable. Asterisk can manage natted sip client with dynamic ip address ? Bye -------------- next part -------------- An HTML attachment

What is the variable like $peerip to get the registered ip address for a peer Regards ********************************************* No employee or agent is authorized to conclude any binding agreement on behalf of Xplorium with another party by e-mail without express written confirmation by an officer of Xplorium. Any views expressed by an individual in this electronic message do

Hi, I`m getting this (from one of my registered phone that has been installed at some location I can`t access at the moment) in the Asterisk CLI. Notice the last 3 digits of the IP address in the error message: Apr 12 23:06:16 WARNING[25593]: chan_sip.c:7036 check_via: '67.39.117.611' is not a valid host Of course it's not a valid host! But, when using "sip show

Hi, there is a way to graph host''s traffic from my lan ? I''ve a linux router (2.4.x kernel), and a lan: linux router : 192.168.1.254 host 1: 192.168.1.1 host 2: 192.168.1.2 host 3: 192.168.1.3 I''m looking for a way to graph traffic ( in / out ) from each 3 hosts, and store total traffic on a mysql table, in order to make statistics later. I think I can do with Mrtg,

hii guys i have some issue with dns in samba 4 i have install and setup 2 samba dc in different Site site2 dc joint to site1 dc, with internal dns topology : site1 --- openvpn server --- firewall --- wan --- openvpn client --- site2 192.168.1.0/24 192.168.2.0/24 in site1 i have some application let say email server: mail.local.lan > 192.168.1.2 web server : web.local.lan > 192.168.1.3

Hi, we have recently started to use ocfs2 on some RHEL 5.5 servers (ocfs2-1.4.7) Some days ago, two servers sharing an ocfs2 filesystem, and with quite virtual services, stalled, in what it seems on ocfs2 issue. This are the lines in their messages files: =====node heraclito (0)======================================== /Dec 4 09:15:06 heraclito kernel: o2net: connection to node parmenides

Hi all. I am running Debian jessie server with Samba, which has joined the Active Directory domain. The domain controllers are Windows Server 2012 R2. After I upgraded Samba version from 4.1.17+dfsg-2+deb8u2 to 4.2.10+dfsg-0+deb8u2, I'm facing the problem that I can't access Samba share by NetBIOS Aliases or IP Address. The Samba's NetBIOS name is mysamba, and I can access by

Hi list, After failing to get a Sipura/Linksys SPA3000, which I've configured as a PSTN gateway, to pass on the Caller ID, I decided to try my luck with a Linksys SPA3102 after hearing some promising stories. Unfortunately, I've run into a completely new problem: it seems Asterisk won't let this device register. I went about configuring the SPA3102 in much the same way as I