similar to: N900 video with Asterisk?

Hello list, I'm trying to set up a video call from my Ekiga client to a Grandstream GXV3140 IP-phone. The call succeeds but there is no video. I have in sip.conf : videosupport=yes disallow=all allow=alaw allow=g726 allow=g729 allow=gsm allow=h261 allow=h263 allow=h263p allow=h264 The Grandstream peer has codecs (sip.conf) : gsm;alaw;g729;h261;h263;h263p;h264 The Ekiga peer has codecs

hi, do you someone test this http://www.grandstream.com/y-gxv3000.htm? video works? (it's have H264 video codec) i want this topology gxv-3000 - nat -{Internet}- Asterisk -{Internet}- nat - gxv-3000 --------------------------------------- Marek Cervenka LCNA - http://lcna.slu.cz =======================================

Hi, we have 4 asterisk, versions are 1.4.35 1.4.36 1.6.2.18 and 1.4.42 One GrandStream GXV3000 is used for the tests. He is registered to asterisk 1.6.2.18 asa well as 1.4.35. Calling echo test is OK on both servers, get audio and video. Calling echo test from asterisk 1.4.36 bye a SIP trunk from both others servers is also working well. What fail, is video on echo test from asterisk 1.4.42

Built asterisk 11.8.1 on a Debian VPS. Testing using ekiga. If h261 is checked in ekiga's video format list I have video, and mouse over the video window shows it to be using h261. But then I get the following lines a dozen or more times in the CLI: [Mar 21 16:25:32] WARNING[31818][C-00000010]: file.c:1241 ast_writefile: No such format 'h261' The problem is that I can't seem to

I am configuring a test Asterisk server (1.8.9.2) to practice setting a single codec globally, to avoid transcoding as much as possible. Since all of my recordings are in gsm format, I am trying to make the SIP clients use gsm everywhere. I am using Ekiga on Fedora 16 x86_64 for my tests. [root at elx2 asterisk]# cat /etc/asterisk/sip_general_additional.conf

I've tried to put a call file to /var/spool/asterisk/outgoing/ to make an outgoing video call, but not succeeded. I could hear the audio, but no video. The asterisk version is 1.4.10, with videosupport=yes The client is eyebeam 1.5.7, with h263 support. Here are some debug messages. It shows the client and asterisk negotiated the video capabilities without problem. However, the 'show

Hi, I use a simple scheme: SIP video phone A (h264/Asterisk 1.8.11) <---IAX2 trunk----> SIP video phone B (h264/Asterisk 11.7.0) When calls from A to B and vice versa drop on pickup. On B side: [Oct 24 16:33:49] DEBUG[15590][C-00000012] res_rtp_asterisk.c: Setting the marker bit due to a source update [Oct 24 16:33:49] DEBUG[15590][C-00000012] res_rtp_asterisk.c: Setting the marker bit

Hi all, I realise that asterisk's codec negotiation has been discussed in the past multiple times. What I haven't been able to understand is how asterisk decides which video codecs to advertise to the other end when canreinvite=no in sip.conf and the initial caller doesn't support video. My tests are quite simple, I use an asterisk with 4 peers all on the same LAN. My sip.conf

I am trying to set up a Grandstream GXV-3000 Video phone to Asterisk ver 1.2.21.1. The problem I'm having is that it can call other SIP phones, but not vice versa. Can someone tell me where is the problem? TIA! Here's part of my configurations: ---------- sip.conf ---------- ; 113 is the Grandstream phone [113] type=friend username=113 secret=secret context=default dtmfmode = rfc2833

Hi, I've a problem configuring my Asterisk. What I try to reach is to interconnect a Tandberg Visioconference (SIP) world with my Asterisk (SIP) with 1 constraint I can't change : "every RTP flow needs to pass THROUGH Asterisk, and are NOT nated" What I observe : - a call made from a SIP Phone registred in Asterisk to Tandberg works (voice and video bidirectionnal) - a call

Hello everyone interested is there any application that can run on this phone.When I installed wine application on my phone(n900) was written in the description: This version of is built for the ARM cpu and can NOT run i386 native WINDOWS applications.Only ported Windows applications compiled for ARM will work The problem is where to find these applications

Hello all, I am trying to leave a video voicemail but am unable to do so. I am using Ekiga (formerly Gnomemeeting) to make a SIP connection to Asterisk 1.2.4. Ekiga supports h261 for video. The call connects and negotiation seems okay. When I leave a message, however, only the audio is recorded. Looking in the log file afterwards I see many messages like this: Mar 21 22:02:34 WARNING[2418]

Hello, I am running asterisk 1.4. For argument's sake I have 4 telephones. 2 support video, 2 do not. Calls between phones work fine and codecs are properly negociated. I have videosupport=yes in sip.conf and when the two video phones communicate I have video. I call meet me with this command EXEC MEETME 1234|d SIP looks like this : -- AGI Script Executing Application: (MeetMe)

Hi, I tried to turn on Video and get the following cli-WARNING output -- Executing [8600 at outgoing-kamailio:1] Answer("PJSIP/7000-00000000", "") in new stack > 0x7f46f41ff2e0 -- Probation passed - setting RTP source address to 192.168.8.203:17200 -- Executing [8600 at outgoing-kamailio:2] ConfBridge("PJSIP/7000-00000000", "8600") in new stack --

Hi, We can't read the messages in our mailbox always getting -- <SIP/tootaiAUDIO-00000001> Playing '/var/spool/asterisk/voicemail/default/100/Old/msg0002.slin' (language 'fr') [Oct 11 13:24:50] WARNING[26778]: app_voicemail.c:7802 play_message: Playback of message /var/spool/asterisk/voicemail/default/100/Old/msg0002 failed As you see Asterisk try to read

Hello Happy New Year! I succesfully installed the Ports of Zaptel BSD 1.4.0 and Asterisk 1.4.13 (that's the latest in the Ports). To save CPU, I'd like to play PCM WAV files instead of eg. GSM. Per... www.voip-info.org/wiki/view/Convert+WAV+audio+files+for+use+in+Asterisk ... I recorded a sample of my voice using XP's Sound Recorder, then ran the following : sox test_wav.wav -r

I can create an audio call file and specify Application: Playback and Data: a path to the audio file, it calls the phone and plays the audio message just fine. I am trying to do the same with a video file. I specify Application: Playback and Data: the path to the video file (no ending of course), and I do specify also the Codecs: h264,h263 etc... Asterisk reports: *File /tmp/video does not

Hi all, I am using to Xlite to save video voice mail. when i retreive it, then only video show , no voice is here out. Plz tell me where ,i am wrong , and how i can able to see video plus here audio in voice mail box. I did following configuration In Sip.conf videosupport=yes [phone1] type=friend host=dynamic context= employees mailbox=101 at default

Hi, i have try to send IM from Client A (Ekiga) to Client B (Ekiga). I have enable the textsupport in the sip.conf. I used this "How to": http://www.voip-info.org/wiki/view/Asterisk+Documentation+1.6.1+realtimetext.txt sip.conf [general] [...] disallow=all allow=ulaw allow = alaw allow=t140 allow=t140red textsupport = yes videosupport = yes

Hi list,* *I am not able to make video calls between two sip accounts. below is the information. please help me where I am missing the configuration.* Extensions.conf* exten => 111,1,Answer() same => n,Dial(SIP/2206,60,r) same => n,Hangup() *SIP.conf* [2218] type=friend secret=******* callerid="Virendra" <9172341457> host=dynamic ;