similar to: asterisk-users Digest, Vol 70, Issue 54

Yes this scenario works on my 2 systems which are at LAN. I made one system as server (192.168.0.20) and registered from other system... it is fine but now there is a different scene. actually there is a registered user named abc at system1 (192.168.0.20) having context [payasyougo] which is used to do outbound calls. we want to use this user's context and account so that when we register

sorry for typo mistake in my last post. as from my orignal post two registration of the same user are as follows SIP/XYZ at 119.68.0.90:5060 SIP/XYZ at 202.16.34.10:5678 so dial command with unique-id i want to use will be Dial(SIP/XYZ at 192.168.0.20:5062-096afee8,30,rtT) Dial(SIP/XYZ at 192.168.0.12:64290-0966ab80,30,rtT) and not Dial(SIP/192.168.0.20:5062-096afee8,30,rtT)

Thanks Vardan, I will like to know if this scenario can work when peer is not having fixed ip and we use host = nasir.server.com ? also I have set insecure=invite,port what if i use insecure=no thanks again. Message: 24 Date: Tue, 11 May 2010 10:52:14 +0500 From: Vardan <hvardan71 at gmail.com> Subject: Re: [asterisk-users] Dialing a SIP Peer without using register strin To:

Hi Vardan I did same as you told and deleted the SIP information in Astdb and restarted asterisk. but the result was same. as you said there might be mistake in sip.conf so i am pasting both servers configuration here.. 1- nasir.server.com [abc] username=abc type=friend secret=mysecret nat=yes mailbox=12234568 incominglimit=2 outgoinglimit=2 host=dynamic dtmfmode=rfc2833 context=payasyougo

Hi C F no asterisk and sip device are not behind same router. actually both are in different countries. how ever when caller and callee are behind same routers voice is just fine (both ways) and i can see re-INVITEs too. but when someone calls from another router then this issue arises. caller can hear the called party but called party can not hear caller. and there are no re-invites issued

yes, actually this scenario is on remote servers. like SIP/XYZ at 119.18.230.20:5060 SIP/XYZ at 202.68.0.90:5678 audio is ok when dialing without using ip & port as below SIP/XYZ but when i dial using below dialstring SIP/XYZ at 202.68.0.90:5678 or SIP/XYZ at 119.18.230.20:5060 then the problem arises hope you got the idea.. Nasir

thanks for your reply but i did not meant that. ${CALLERID(DNID)} will return then number which i don't want. what i want is channel-id like if we have a user named "nasir", then we dial it as follows Dial(SIP/nasir) but actual channel-id that asterisk uses is something like " nasir-2b487e9". and on the asterisk cli we can check this when call is answered or hangup,

sorry, you r right i just checked it with registration so there were astdb entries for SIP registration. anyhow after clearing settings frm astdb i tried the same scenario you advised but no luck. I think i told that i am not using server as peer but want to use a user [abc] as peer so that when ever i use dial(SIP/${EXTEN}@abc) or dial(SIP/abc/${EXTEN}) the call will be out from server using

Hi, I am trying to dial a registered user via his IP:Port mechanism, but problem is that the audio data is not reaching to dialed user. here is the scenario. caller and callee both are registered at asterisk server. asterisk server is on public ip so no port forwarding and natting necessary there. however caller and callee both are behind router and there is port forwarding enabled and nat=yes,

Hi, I am working on calling 2 registrations of same user on 2 different ip or ports. It works fine and both phones ring simultaneously. the problem is that there is one way audio, calling party can hear me but i can't hear calling party. here is the scenario.. SIP/XYZ at 192.168.0.20:5060 SIP/XYZ at 192.168.0.10:5678 i dial using following dial string Dial(SIP/XYZ at

Hi, I am new to this list and this is first time i m posting here. please help me out currently I am working on dialing a sip peer on an asterisk server from 2nd asterisk server. scenario is like this. on my system i am using this peer in sip.conf. [abc] type=peer username=abc secret=mysecret host=192.168.0.20 context=default dtmfmode=rfc2833 ;restrictcid=no canreinvite=yes

Good day to all-- First off let me say that I have been very pleased with the mailing list. I have learned a ton of stuff just reading other peoples questions and comments. I really enjoyed the VOIP Conference call on Friday morning. Still working on figuring out the best approach to custom voicemail emails (the reason I joined this group); however, we have more pressing issues. I

hello i was wondering what is the use of "rinstance" in SIP Headers. I noticed that this parameter is visible only when there is NAT invloved. I am experiencing one way audio when dialing a registered user by his IP:port. I this case "rinstance" parameter is missing. when i dial "SIP/username" audio is fine but when i dial SIP/x.x.x.x:port there is one way audion.

Hi, I am trying to dial a sip user via his IP:PORT Combination. i am using XYZ as target user which is registered. Asterisk server IP: 70.118.x.x calling user IP: 117.58.x.x called user IP: 117.58.x.x:5062 First I dialed my registered user in normal way like this, Dial(SIP/XYZ,30,rtT) and during conversation audio was OK in both ways. Then I dialed the registered user via

hello, Although my previous posts in this forum have not received satisfying answers, here is another question from me. my question is can i use ChanIsAvail function to get the status of a user in the format SPI/user-id if i provide user in sip uri like this ChanIsAvail(SIP/user at 153.18.x.x:5062) calling user with this sip uri works fine. I once tried but status returned was "unknow

All, I have an issue with IAX that I can't comprehend. Approximately every eight minutes my servers go unreachable. They stay unreachable for exactly 10ms. I have two servers running IAX and it happens on both servers simultaneously. I have searched the archives and see similar issues, but not the exact same one. I am on the current CVS stable version of *. Also, during IAX calls,

Hi, I think I encountered a bug in the qualify timers for IAX on asterisk 1.8 but I'd like to check if I'm not messing up in my config somewhere before reporting a bug. In my IAX peer configuration I have this: [remote-host] type=friend host=172.16.6.45 username=remote-host secret=test notransfer=yes qualify=16000 qualifyfreqnotok=30000 disallow=all allow=alaw allow=ulaw allow=ilbc

I have logs full with this messages... I must have qualify turned on, because phone is behind firewall, main problem si, that phone is each hour about one hour unavailable! :'( I tried to modify minexpiry/maxexpiry sip.conf timeouts, but nothing help me. I'm using latest firmware 8.4 in phone, will be better to downgrade? to what version? (latest asterisk 1.4branch) [Dec 7 00:36:56]

Hi, my question is how can i get channel-id of a user or peer. I tried using ChanIsAvail(username). this works correctly when user and asterisk are on Local LAN. But my asterisk server is on public ip and users are behind nat, and so this method says unknow host when used on public asterisk server. I also tried built-in variable ${CHANNEL}, but this returns the channel-id of the calling channel.

Hi, I'm using qualify= on my asterisk server that provides outgoing pstn calls to a few companies. I've got one client in particular that has their own asterisk server which is connected to my server. This client seems to be having a nat issue. It's not a connectivity issue as i've tried constant pings and the line is up constantly. I'm getting the following: [2010-11-13