similar to: Ringback

Hello, I have enabled call parking and it works great. However, when the "hold time" hits the "parkingtime", the extension that parked the call is called back. The problem is, if that extension does not pickup the returning call, the call gets dropped. Is it possible to get Asterisk to automatically park the call again if the callback isn't answered? Quite

Hi, I have the following situation: At a branch , there is a Cisco Call Manager with users all having Cisco phones. Now I put down a Asterisk 1.2.12 box at the branch, which talks H323 via chan_oh323 to the CCM. So calls go from the CCM, go H323 to the local Asterisk box, then I take it via SIP to another Asterisk box. From there I am hooked up to 2 different providers, for Local and

Hi all I share my Asterisk Server with a few friends. It is connected to PSTN, and various SIP Providers. I offer Free Calls to my friends, but myself I would like to be able to make calls to non free destinations via my PSTN Line. Now I do this in my dialplan: ----------------------- [myself] ; National Destinations exten => _0z.,1,Dial(SIP/someisp/${EXTEN}); exten =>

Hello, We have an asterisk 1.2.13 box that use a Digium TE205P T1 PRI connect to the telco, users mainly use snom 320/300 SIP phones. When dialing to an external phone number with custom ringback music, users reported that they could not hear the music but can only hear the standard ring tone generated by the system. Is there any kind of settings need to allow the ringback music pass to the

1) CTO (Chief Technical Officer) Ruby Engineer: My client offers a tremendous growth opportunity for a highly skilled, experienced Ruby on Rails software engineer/coder to be rapidly groomed and promoted to a CTO role or someone who can fill a CTO role immediately. They are a highly successful VC-funded startup in the Worcester, Massachusetts area which has achieved world-dominance in

Hi, I think I already know the answer to this question, but is there any way to do the following using realtime? Or do I have to create a full dialplan for each client without using includes? [client1_phones] include => client1_internal include => client1_outgoing_calls include => test_calls include => parkedcalls [client2_phones] include => client2_internal include =>

Hi, I've noticed that sometimes instead of getting a regular ring tone when calling out on a Zap channel, I get this obnoxious loud noise which forces me to hang up. Is this a problem in the Zaptel driver? I seem to recall that ringback tones are generated by zaptel when dialing out from a SIP phone over a Zap trunk. Thanks.

Hello, everyone. Could anyone explain me how does ringback detection works in asterisk. Sometimes, when making a call, my asterisk box doesn't detect a ringback and I just hear silence until the other party picks up the phone. I've checked the SIP messages and they are ok (I'm getting 183 "session in progress"), so I guess I should be debugging the RTP packets. From then on

Hello. I have another issue. When I call in, everything is processed correctly, including voicemail, but I don't hear any ringing/ringback. exten => s,1,Zapateller(answer|nocallerid) exten => s,2,NoOp exten => s,3,Playback(pls-wait-connect-call) exten => s,4,Dial(${PHONE1}&${PHONE2}&${PHONE3}&${PHONE4},15,Ttm) exten => s,5,Answer exten => s,6,Wait(1) exten

I would just like to follow-up on the ringback problem I'm getting from *. As I've said in my previous post, I am not hearing the "real ringback" from the Cisco gateway terminating my call. I don't want to provide false ringback from * (r option of dial), because it'll still give me ringback even if I am suppose to hear announcement or fastbusy. Below is captured ISDN

I am trying to get Asterisk to emulate the sounds of the earlier telephone systems, and the settings in [us-old] are pretty helpful. The only thing lacking is ringback tone, which is not quite as complex as the real phone systems of the day. For example, it is true that a ringback tone commonly used is 420Hz modulated by 40Hz. This is what shows up in [us-old]. But that modulated tone was

I am using Asterisk (Debian unstable packages) with an OH323 connection to my provider. Everything is working except for the generation of ringback tones when I receive inbound calls from the PSTN. My provider tells me that we're sending call progress indications and that because of this they're expecting us to generate the ringback tone. Does anybody know how to configure this in

are you giving answer()? ..o-------------------------------------------------------o.. Brian Fertig Network/Systems Engineer IT Administrator Planet Telecom, Inc. Tampa,FL Office -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Juan Jose Comellas Sent: Friday, September 30, 2005 10:32 AM To: Asterisk Users

Hi to all I'm a new user of TDM400P card. The configuration is OK and I have no problem for incoming call. When I try to place a outgoing call towards a PSTN number the call is not always answered. In other words TDM400P seems to not understand that the call has been accepted from the remote party. In other cases (different extension) the call is accepted succesfully. In my opinion TDM400P DSP

Hello, I was wondering if anyone has any insights on the best way to automatically monitor an asterisk box to check it is constantly available and processing calls. Many thanks Dan ________________________________ IT Maintenance Contract Clients can now access our Instant Chat Service to receive immediate remote IT support. Click the chat link below for support. For more

Hello! An extension registered at asterisk 13.23 initiates an external call (pjsip). After the Invite, the callee (-> ISP) sends a 100 Trying 183 Session Progress (*without* SDP) Asterisk now sends to the extension: 183 Session Progress (*with* SDP) 183 Session Progress (*with* SDP) (really two times) The callee meanwhile sends 180 Ringing (*without* SDP) which is

Dan et al; This looks like a perfect solution. However, I have one issue. If I initiate the macro manually (put it in the proper context/dialplan) it works. I see the *.wav file being created and growing in the /var/spool/asterisk/monitor directory. If I try to implement it adding the MixMonApp => *1,self/both,Macro,mixmon to the [applicationmap] in features.conf, I cannot get it to

Hi, I have PRI configured and up but when i am dialing outside i am not getting any ringback tone but my call is connected. following is my example SIP----------------->PRI ------------> mobile I have set progress=yes in chan_dahdi.conf but still not working if i call inbound from my mobile to internal extension ringing working please help me -S -------------- next

hi: When iam sending calls through sip a fake ringback tone is generated and then call status can't be viewed (if call is ringing,busy,offline) it just rings and rings. Can i disable this? Thanks in advance. _________________________________________________________________ Windows Live?: Keep your life in sync.

Hi What command i need to use to make a call with oh323 and hear the ringback sound Thanks