similar to: OT: NAT in SPA922

Hi all, I have to install 25 IP Phone in some building. I want just basic IP Phones like: Cisco-Linksys SPA922 u$s 146 Grandstream GXP-2000 u$s 105 Snom 300 u$s 119 The most valuables parameters for me are (in importance order from high to low): - Stability (device don't hang in any way) - Voice quality using G729 - Provisioning So what device do

Nearly got an SPA922 phone working behind a NAT, the phone registers, and I can dial out and have two way speech, on an incoming call the SPA922 rings I answer and the SPA922 shows "Anwsering" but never does and the far end continues ringing until the voicemail answers, this then show as a disconnected call on the SPA922 I'm on the lastest firmware 6.1.5(a) Thanks in advance

Hi all, I'm testing Linksys SPA922 phone and I have strange issue. when call is finished on the phone I see "CallEnded" and normal silence for cca. 5 seconds and then I get fast busy for cca. 20 sec. So, this isn't automatic hangup as on other phones I have tried (Cisco 7940, grandstream, XLite,... ) and I have to manually hangup handset to finish a call. Is this normal behavior

Hi all, i have an * version: Asterisk SVN-branch-1.2-r45691, I need to register a linksys 922 phone thru internet and when I make sip debug command i see this debug information: -- SIP read from x.x.x.x:1024: REGISTER sip:mysipserver.com SIP/2.0 Via: SIP/2.0/UDP x.x.x.x:1025;branch=z9hG4bK-839856dc From: "SPA922" <sip:5403@mysipserver.com>;tag=685bbad1fae3325do0 To:

Hi everyone, I'm wondering I would accomplish the following: I want to dial several SIP extensions simultaneously, HOWEVER, for different times (say ext 10 for 15 sec and ext 11 for 30 sec), and potentially with different headers (such as ALERT_INFO) and codecs for each extension. Obviously whoever picks up first gets the call. After the longest timeout expires (30 sec in this example) I want

I have many remote locations that dial into a central server to retrieve voicemail via IAX. Outbound calls are handled as SIP calls from a Snom to a local (to them) Asterisk server that dials the main server thru IAX. I have trained them to check their voicemail via the emailed WAV file, however some of them are, how shall I put it, idiots*, and insist that they *have* to have the MWI indicator

We're investigating audio quality issues in our system; maybe someone can help. We're using Asterisk as a basic PBX, with a single PRI on one side and SIP phones on the other: Sipura SPA-841's. We're experiencing several audio effects which seem to commonly correspond to network failures (packet loss, high jitter, etc manifested as "robot voice", dropouts, periodic

Guys. Anybody know why sometimes on some servers Asterisk shows more than once while doing a ps? [root@server2 akrall]# ps -ax|grep asterisk 20555 ? S 0:00 /bin/sh /usr/sbin/safe_asterisk 20557 ? S 0:00 asterisk -vvvg -c 20558 ? S 0:00 asterisk -vvvg -c 20560 ? S 0:00 asterisk -vvvg -c 20561 ? S 0:00 asterisk -vvvg -c 20562 ? S

Hy all of you, I've successfully installed a freepbx solution with 10 extensions : - 5 on Linksys SPA922 - 1 on Linksys SPA942 - 1 on Thomson ST022 Everything seems to work fine with all the hardphones excepts last week. The thomson has a strange behaviour. It can reach french mobile cell phones but when it reaches "fix" phones, the correspondant can't hear the caller. What

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello everyone Due to security reasons I want to run asterisk as a non root. I normaly installed asterisk, created an * user, moved the binaries to /usr/bin and chowned all the files and directories mentiont in the * manual (handbook-draft.pdf) Now I can start * but I get the following warning (which I don't get if I run it as a root): Feb 14

Hi, Some help with dimensioning the server will be gladly accepted. -50 sip phones (g729) or g711(to avoid transcoding) in LAN -an asterisk server (1.4) doing normal pbx functions + voicemail in the same LAN -Some sporadic conferencing with no more than 2 sip phones and maybe 2 or 3 calls coming from the E1 for a total of 5 people in a conference. The asterisk server will get an E1(pri) via one

Hi, I am running a Asterisk 1.6 box in our Data Centre, and have a number of users connecting to that box, as their PBX. Calls in and out work fine, as does voicemail. The PBX at the Data Centre has an External IP, Nat?d to it by the firewall, and the relevant ports are open. The Office users have a dedicated internet connection for the phone lines, and calls are seen to traverse this

Hi All: I have experienced some big problems on an asterisk production server under 1.2.18: First of all, a very rare message like this... No application Macro ??? -- Saved useragent "Linksys/SPA922-5.1.7" for peer 1363 Jun 6 15:08:24 WARNING[406]: pbx.c:1720 pbx_extension_helper: No application 'Macro' for extension (pbx-incoming, 1133, 1) == Spawn extension

Hi I know that this topic was on the list maybe dozen of times. But I have a question regarding the fax support in asterisk, because all the information I could get does not give me the clear view of if. I read that Asterisk 1.8 will have strong fax (t.38) support, but I want to know if these four scenarios will be possible to achieve: fax machine (phone+fax) connected to ATA --- SPA2102 ATA ---

Hi there! First mail on the list :) 1.- is it possible to use an spa2102 to make and revice calls from a "normal" phone? I mean, I know I can use it to connect an analog to an asterisk server, but I want to know if it can be used to connect asterisk to the analog phoneline. 2.- I'm trying to unlock the spa2102 with no succes at the moment, any links or hint will be very

Hello I am going to try the new Digium Fax for Asterisk product. I'm planning to connect fax machines to Asterisk (currently 1.6.0.9) via T.38 ATAs. I'm looking at Grandstream HT502 or Linksys SPA2102 ATAs. If anyone has any experience with these devices, or other recommendations, I would be grateful if you could share your experiences. Regards Ian

Hi all, I'm using Asterisk 1.2.5 and , for some reason, when I install it, the module app_meetme.so didn't install. Is there some way to download that module, and add it to asterisk without re-install it? Thanks in advance Sebastian

I currently us Linksys/Ciscio, Grandstream and AudioCodes ata's. none of the three perform well in all enviroments. Between stablity issues, T38 and DTMF talkoff all three suffer some combination of issues. I am looking at Patton and Innomedia. Has any one tried either brand and what is your experience with them. Which would be the base for stability, audio quality, provisioning, DTMF

Hi all, I'm new in the forum, and although I have some experience in Asterisk, I've never work with Asterisk FXO, FXS, E1... cards. I have several costumers with ATAs working with my SER. However one of them bought an Alcatel PBX OmniPCX Enterprise and now he wants I give him a E1 interface for interconection with its new PBX. I understand I need a E1-IP gateway which could be Asterisk

Topology: analog_phone-----SPA2102-----Navini_Wireless_Router------ISP------Asterisk A ping against the asterisk server shows aprox 145ms roundtrip. 128kbps upstream 512kbps downstream g729a as codec signal quality of the navini router: 100% The ATA operates correctly in every form, however sometimes when someone is talking to me (the other person is at pstn) and then I start talking the other