similar to: Taqua users out there?

Anyone have any luck configuring a SIP trunk on a Taqua to talk to Asterisk? We were initially set up as a subscriber (access line) but that had some undesirable side-effects, such as quashing the ANI on outbound calls. Looks like we're going to have to reconfigure the trunk as a "network gateway". I asked their Director of Product Management for product documentation but

Anyone have any configuration experience connecting Asterisk 1.8 to the PSTN via SIP on a Taqua 7000 switch? My local carrier recently upgraded software and changed their configs so that signalling and media are on different cards (and hence different IP addresses), and it's causing issues. I suspect there are other factors at play... it may or may not be behind a properly configured SBC.

I'm using Asterisk 1.8.6.0 on my router talking to my ISP's Taqua 7000 (?) switch. I'm using a config that looks like: [sip_proxy-out] type=peer authuser=208nnnnnnnn remotesecret=xyzzy qualify=100 host=n.n.n.n call-limit=5 nat=no ; sendrpid=yes insecure=no But the Taqua responds to outbound INVITES with 403 Forbidden (oddly, not 401 or 407). Also, from what I can tell, the

I've got the following situation. I'm running Asterisk 1.4.18 on a firewall/gateway machine, with some SPA-942 (f/w 5.1.15(a)) phones behind it. I'm peering SIP with a Coppercom switch sitting behind an SBC. On outbound calls, I get 2-way voice, no worries. On inbound calls, I get one-way voice (I can hear the caller but they can't hear me). I've looked at tcpdumps of

All, I am trying to find a SIP ITSP that honors dial around compensation. We are adding a Flex ANI code to our outgoing SIP invites by appending an isup-oli tag to our From: address, like this: INVITE sip:18889996563@carriers.icall.net SIP/2.0 Via: SIP/2.0/UDP xxx.y.34.201:5060;branch=z9hG4bK7f314484;rport From: "Dougs Payphone"

Anyone have a chance to test any of the various iPhone SIP apps? I see there are a few out there, but most of the iTunes reviews aren't sufficiently technical to be useful. Thanks.

Hi, We have a CLI that certain users get dropped into when they log in. One of the things they can go is generate certificates (actually .p12 key/certificate bundles) that they will then scp out of the box from another host. Problem is that if their default shell isn't sh, ash, dash, bash, zsh, etc. then things break. Is there a workaround to allow scp/sftp to continue to work even for

On Tue, 25 Apr 2023 at 03:36, Philip Prindeville <philipp_subx at redfish-solutions.com> wrote: > > On Apr 10, 2023, at 7:24 AM, Darren Tucker <dtucker at dtucker.net> wrote: [...] > > Since you're using 9.1, the message could be an "Invalid free", since > > there was a double-free bug in that release :-( > > Forgot to ask: does this bug manifest

On 07/12/23, Philip Prindeville (philipp_subx at redfish-solutions.com) wrote: > We have a CLI that certain users get dropped into when they log in. One of the things they can go is generate certificates (actually .p12 key/certificate bundles) that they will then scp out of the box from another host. Off topic, and assuming the .p12 bundles need to be post-processed by clients for use by ssh,

On Fri, 8 Dec 2023 at 07:39, Philip Prindeville <philipp_subx at redfish-solutions.com> wrote: [...] > Problem is that if their default shell isn't sh, ash, dash, bash, zsh, etc. then things break. > Is there a workaround to allow scp/sftp to continue to work even for non-shell accounts? sftp should work regardless of the user's shell since it is invoked as a ssh subsystem

For someone that's network-aware, but hasn't sat down and plowed through umpteen SIP-related RFC's and memorized the standards, is there a good primer on troubleshooting SIP issues? I'm seeing a lot of NOTIFY/603 messages on my network between Asterisk and my Sipura 942's, for instance... Not sure what these are... perhaps the qualify keepalives? In which case, I guess

Hi All, When I want use Asterisk as a PBX to cooperate SIP ITSP, I can not set the caller ID, so SIP ITSP do not accept the call. In Asterisk, I set a account in sip.conf to register on ITSP SIP Server: register => 6292@218.1.121.237/6292 And I added a user 6292 in Asterisk just like the account on ITSP SIP Server: [6291] type=friend username=6291 callerid=6291 host=dynamic

I'm using a bunch of SPA942's, and I'm trying to provision them mostly by DHCP (and what I can't set that way, I try to provision via HTTP interface into the phone). I changed the domain in my AstLinux config from "astlinux" to redfish-solutions.com, and set that in my sip.conf file as well: context=incoming

I was wondering under what conditions Asterisk will hand off a call to another switch. I'm trying to verify that my local PSTN's Coppercom switch operates correctly... and wanted to know how to get a call REFER'd to another end-point. Thanks, -Philip

when i run: wine ./Civilization4.exe (in the correct dir) i get this output: ###################### fixme:system:SystemParametersInfoW Unimplemented action: 55 (SPI_SETMOUSEKEYS) fixme:system:SystemParametersInfoW Unimplemented action: 59 (SPI_SETSTICKYKEYS) fixme:cursor:CURSORICON_CreateIconFromANI Loading all frames for .ani cursors not implemented. err:ole:CoGetClassObject class

Hi. I have a Supermicro 5018D-FN4T (Xeon D-1541 based SBC) that I use for virtualization. I?m running Centos 7.3 on it (updated), with the CentOS-QEMU-EV.repo repository as the source for virtualization packages. I run an Ubuntu 16.04-2 guest VM on it, which is ordinary enough. What?s perhaps less ordinary is that I?ve attached a Lexar Media, Inc. ?Lexar Professional Workflow CR1 CFast 2.0 USB

> On Apr 10, 2023, at 7:24 AM, Darren Tucker <dtucker at dtucker.net> wrote: > > On Mon, 10 Apr 2023 at 07:07, Peter Stuge <peter at stuge.se> wrote: >> >> Brian Candler wrote: >>>> What's odd is that the length is *always* 1231976033 (which is >>>> 0x496E7661 or "Inva" in ASCII). > > One thing that can cause this is

https://bugzilla.mindrot.org/show_bug.cgi?id=1856 Summary: Wrong QoS naming and obsolete defaults Product: Portable OpenSSH Version: 5.8p1 Platform: All OS/Version: All Status: NEW Severity: normal Priority: P2 Component: Miscellaneous AssignedTo: unassigned-bugs at mindrot.org ReportedBy:

https://bugzilla.mindrot.org/show_bug.cgi?id=1733 Summary: Enhance support for QoS (ToS) by supporting DSCP/CS and adding option Product: Portable OpenSSH Version: 5.4p1 Platform: All OS/Version: Linux Status: NEW Severity: enhancement Priority: P2 Component: ssh AssignedTo:

Hello! > Hello! > > We have the server with RHEL 5.5 (64-bit) and need to connect many parallel users over ssh (OpenSSH). > Usually we use openssh-4.4p1, builded from the sources with changed "servconf.h" file by this type: > #define MAX_ALLOW_USERS 10000 /* Max # users on allow list. */ > #define MAX_DENY_USERS