similar to: DIALSTATUS variable and qualify=no

I'm trying to write a dialplan that will allow me to "stress" test it. I want to be able to dial an extension, or pretend that the extension is busy or out of order (so that I can see what to do) given the dialplan snippet: [outbound] exten => _X.,1,NoOp(${TEST}) exten => _X.,n,Dial(SIP/${EXTEN}) exten => Busy,1,Busy(2) exten => Busy,n,Hangup() exten =>

What am I doing wrong? Goif dialstatus: busy CONGESTION not working. exten => _7NXXXXXX,1,Dial(SIP/7780${EXTEN:1}@pstn-5665,60,tr) exten => _7NXXXXXX,n,GotoIf($[$["${DIALSTATUS}" = "BUSY"] | $["${DIALSTATUS}" = "CONGESTION"]]?line2) exten => _7NXXXXXX,n(line2),Dial(SIP/9780${EXTEN:1}@pstn-1270,60,tr) exten => _7NXXXXXX,n,Hangup() When I try to

Thanks Dovid! Indeed looks a bug but regardless of this, this problem made me think that the HANGUPCAUSE could be used for this purpose with benefits. I couldn't find an explanation about when DIALSTATUS would actually be better. The HANGUPCAUSE was reworked in version 11 ( https://wiki.asterisk.org/wiki/display/AST/Hangup+Cause) but I didn't find someone actually stating it is a better

Hello list, Hope all doing well! I've been checking some cases when a Dial fails and dialplan execution continues to handle this. I am finding it a little confusing how we should handle the DIALSTATUS and the HANGUPCAUSE in this situation.... More specifically, I am facing a case in version 13.6.0 where I am getting a DIALSTATUS=BUSY and HANGUPCAUSE=19 after receiving a 480 SIP error. Seems

In examples, s-${DIALSTATUS} is used to handle unsuccessful dial attempts in the s extension. Goto() is used in examples. Is the prefix "s-" mandatory? Is it related to the original extension "s"? (Apparently Goto(${DIALSTATUS}) won't work for me.) Yuan Liu

I am having a problem with ${DIALSTATUS} and )=CDR(disposition) disagreeing. Below is a dialplan snippet and the resulting CLI output. This is running in an 'h' extension. Noop(DIALSTATUS=${DIALSTATUS}) Noop(CDR(disposition)=${CDR(disposition)}) -- Executing [h at pbxmax-dial-simple:1] NoOp("SIP/msx_01-0000005b", "DIALSTATUS=ANSWER") in new stack

Hi, I am trying to pass DIALSTATUS to a Macro so that i can set a variable when a call is placed (call is placed via a call file to another extension first). Basically i don't want to dial a number where a call is already bridged and thats why i am setting a variable. [macro-afterdial]; exten => s,1,Goto(s-${ARG1},1) exten => s-ANSWER,1,SetGlobalVar(NUM${ARG2} = "ACTIVE")

Just throwing this out here, hopefully someone can tell me why. *CLI> show version Asterisk CVS-HEAD-11/17/04-10:16:38 built by root@wanderer on a i686 running Linux Zap/g1 is pri_cpe to Bell Canada 5551234 is a normal POTS line I have busied out (handset offhook) exten => 1234,1,Dial(Zap/g1/5551234,,g) exten => 1234,n,NoOp(HANGUPCAUSE is ${HANGUPCAUSE} and DIALSTATUS is

Hi, As of v 1.6.1.1, can anyone tell me what the current possible values for DIALSTATUS could be? I found http://www.voip-info.org/wiki/view/Asterisk+variable+DIALSTATUS but believe it is outdated since there is no FAIL or FAILED in this list. Thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL:

According to http://www.voip-info.org/wiki-Asterisk+variable+DIALSTATUS when a caller hangs up before the callee has time to pick the phone up then DIALSTATUS should be CANCEL. And it is. However, the disposition field in the CDR table is "NO ANSWER". So if I analyze the CDR data I won't be able to discriminate calls cancelled by the caller and calls not answered by the callee

Hi all, I am trying to make decisions in my dialplan based on {DIALSTATUS}. I am creating calls using AMI (rawman with parameters via URL) with action:Originate. I am using SIP and an outside voip provider for the calls. If I define the number to call in the Channel parameter (e.g. SIP/15555555555 at myvoipprovider, the call gets placed before entering the context that I defined. I understand

Folks, When I have a dial string like this: Dial(SIP/3254101&SIP/3254102,20,tr) and I want to check the ${DIALSTATUS} variable after the dial, how do I know which number I am getting the variable for? And, what about this? Dial(SIP/3254101&SIP/3254102@proxy1,20,tr) What happens in that case? How can I get the ${DIALSTATUS} variable for EACH NUMBER dialled? Thanks, Doug.

Hi there, I would like to setup up my Asterisk to do this: receptionist answers the call, caller says he wants to leave a voicemail message for Ashleigh, receptionist transfers the call to Ashleigh's voicemail I guess It has something to do with dynamic features, or probably blind transfer to special ext. might do it what would you recommend? cheers!

Hello, Is it possible to retrieve the DIALSTATUS variable when placing call through a call file. This variable is set when using the Dial() application from the dialplan, but I am using a call file for my current application and need to get the dialstatus. Thank you. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Using 1.0.9: If I have: exten => s,1,Dial(SIP/5555&SIP/12345@192.168.1.1) How can I return the DIALSTATUS variable for the second SIP channel ONLY if the second SIP channel is busy, regardless of the dialstatus of the first SIP channel? What I want is, if the second SIP channel is busy go to n+1 or n+101 regardless of the status of the first SIP channel. tia

Hello, I would like to use AMD on outgoing calls using analog line. I tested with SPA3102 and cisco2811 as gw and asterisk 1.8.26.1 as well as 11.8.1 Other end is analog number behind another cisco/asterisk, also tested calling a mobile number with the same result. What I did: dial is done like exten => s,n,Dial(SIP/<IP gw>/<dialed number>,,M(myMacro)), which tell Asterisk to

I can not seem to get dial status to work, in sip.conf I have: qualify=yes simple plan: exten => 51,1,Dial(SIP/11,20,r) exten => 51,n,Goto(s-${DIALSTATUS},1) exten => s-Busy,1,Hangup() exten => s-Answer,1,Macro(atb) I'm dialing from exten.11 to exten.11 so I get busy signal and the channel should hangup but it doesn't How to print/display dialstatus? I'm using ATA --

Hi all, I am from India and has been recently using asterisk for testing and enahncing my telephony knowledge. I am trying to use the originate Command from the Asterisk manager on both SIP and ZAP. The command works successfully but does not return any DIALSTATUS such as BUSY,ANSWER,NOANSWER as in case of command DIAL when used from the dial plan. Can some one guide me how to get the vaue of

Phone - TDM430P - home* - IAX2 - office* - PRI - Telco I dial a busy number from the Phone. Home* shows this in the CLI: -- Executing Macro("Zap/1-1", "dial-wu|2922004") in new stack -- Executing Dial("Zap/1-1", "IAX2/andrew@wu-ast/2922004||g") in new stack -- Called andrew@wu-ast/2922004 -- Call accepted by wu-ast (format gsm) --

Hi. I'm dialling two numbers - one that's unobtainable, one that's busy. ${DIALSTATUS} is coming back ANSWER each time right before the channels hang up. Am using the following dialplan macro to dial out. [macro-advdial] exten => s,1,Dial(${ARG1},20,g) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status