similar to: SS7 over an FXO interface

Hi Guys, i spent some time to figure this out (since i love how dialplan is written) but i decided to ask for your help guys. i have two asterisk servers one is 1.2 the other is 1.4, from 1.4 (pbx1) to 1.2 (pbx2) i can leave a voice mail without any pb, but from pbx2 to pbx1 it just hang up. in pbx2 extensions.conf: i am using: exten => 8029,1,Dial(IAX2/pbx1/${EXTEN},20,tTWwr) in pbx1, i

Hi Guys, i am using the following config in pbx1: register => pbx1:endopass at 172.16.200.175 <pbx1%3Aendopass at 172.16.200.175> [pbx2] type=friend host=dynamic trunk=yes sercret=password context=[default] deny=0.0.0.0/0.0.0.0 permit=172.16.200.175/255.255.255.128 in pbx2: register => pbx2:endopass at 172.16.200.176 <pbx2%3Aendopass at 172.16.200.176> [pbx1] type=friend

Hi Guys, i am using two PBX's i can call from pbx1 a cellphone tied to pbx2 that way: 1) use a phone in PBX1 2) call extension in PBX2 3) extensions in PBX2 ring to a cellphone (as this specific ext is tied to a cellphone) my questions now is : am i gonna be able to dial from an IPphone registered within PBX1 to a cellphone by using the Trunk (Zap or dahdi) of PBX2? anybody know

Hi, I am trying to understand why some of my call transfers fail. My scenario is as follows: Legacy PBX1 ---PRI (EuroISDN) Zaptel--- Asterisk PBX2 Step1: PBX1 extension 101 calls PBX2 extension 102 Step2: PBX2 extension 102 answers the call and transfers it to PBX1 extension 103 Step3: PBX1 extension 103 answers the call and transfers it to PBX2 extension 104 Step3 fails and extension 103

I have a weird situation. A polycom phone is configured to use system pbx1 as the primary outgoing 'proxy', followed by systems pbx3 and pbx2. All three systems have identical sip.conf files. The phone is registered on pbx1. I shut down the Asterisk application on pbx1. I make a call. The phone sends an INVITE to pbx2. Pbx2 sends back a 407 Proxy Auth message to the phone. The phone sends

Dear List I have notice this kind of problem between my two * box. My scenario is : Iax GSM IaxClient----->PBX1------------>PBX2-->TDM today CVS Stable V1 I use as Client FireFly with IAX2/GSM and try to call my PBX1 this server call PBX2 to terminate the call trought a TDM line (TE410P) but after PBX2 join the two call i can see the log below from my PBX1, i can speak for

Can someone tell me how Asterisk handles music-on-hold between servers? Documentation for this is non-existent. Lets say user A, who is registered on pbx1, calls user B, who is registered on pbx2. 1. User A puts user B on hold. The moh that is played to user B should be specified according to user A. Which pbx box should this be set on? pbx1? pbx2? Both? 2. Is the situation any different if the

Hi All, i want to make an extension from pbx1 able to tlak to another extension from pbx2 or use pbx2's trunk to dial outside calls. so i edited in both servers accordinally the iax.conf: register => pbx1:pass at 172.16.200.175 <pbx1%3Apass at 172.16.200.175> [pbx2] type=friend host=dynamic trunk=yes sercret=pass context=[default] ; i used the biggest context to avoid confusion as

I have 2 Asterisk servers connected via IAX2 connections. PBX1 is on the internet with a public IP Address - with PRI PBX 2 is behind a NAT router with IAX2 Ports forwarded 1-way audio is an issue with incoming and outgoing calls using the PRI. However whenever 1-way audio occurs, PBX2 can call PBX1 extensions and there are no issues. As well as a restart of asterisk on PBX2

I'vce got three Asterisk systems here that I'd like to be able to place calls between with IAX. As usual, I've spent several hours playing with it, really getting nowhere. Asterisk is so mentally draining. Each system, pbx1, pbx2, pbx3, should be able to connect to every other. Do I need separate user/peers or can I combine them into a single user=friend for each system? if I place a

Hi. It is propbably a really naive problem, but I really couldn't find answer how to connect two Astrisks via SIP. I managed to do it via IAX without any problem. But this is a test installation and I would like to connect them via SIP. So I have two computers: pbx1 - 10.1.3.207 pbx2 - 10.1.3.204 pbx1 handles extensions 1xx and pbx2 for extensions 2xx. I would like to call user from pbx2 to

Hi all I installed DAHDI Version - 2.6.1 DAHDI Tools Version - 2.6.1 libss7-trunk Asterisk 11.0.1 from source on Fedora 12 x86_64. Now i`m unable to load chan_dahdi and libss7: myserver*CLI> module load chan_dahdi.so ?ERROR[10124]: chan_dahdi.c:17842 process_dahdi: Unknown signalling method 'ss7' at line 37. myserver*CLI> module load libss7.so Unable to load module libss7.so

Hi Team, i have been facing issues with sangoma card with 16 E1. used LibSS7 asterisk 1.6 with 8 E1 the links are stable , but moment i add another card of 8 E1 for to support 16 E1. link keeps fluctuating any idea why ? Please help Thanks Vinod Dharashive -------------- next part -------------- An HTML attachment was scrubbed... URL:

It seems that I am having a heck of a time explaining my attempts at distributing ACD Queues to the list. Here's one little problem, that's only a piece of the puzzle. dundi.conf: 180q => global_dundi_q_pbx1,100,IAX,dundi1:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => global_dundi_q_pbx2,200,IAX,dundi2:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q =>

I have three Asterisk boxes. Each has the following in dundi.conf: 180net => dundi_local,0,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx1,1,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx2,2,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx3,3,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial My iax.conf on all three

Hi, I am requesting for a E1 connection from my telco. They are asking if I want DSS1 or SS7, and I am stuck here. Could someone tell me the difference between the two? How should I decide which one to use? Thanks in advance for your help. Mark -------------- next part -------------- An HTML attachment was scrubbed... URL:

> Can someone tell me how Asterisk handles music-on-hold between servers? > Documentation for this is non-existent. > > Lets say user A, who is registered on pbx1, calls user B, who is registered on pbx2. > > 1. User A puts user B on hold. The moh that is played to user B should be specified according to user A. Which pbx box should this be set on? pbx1? pbx2? Both? > > 2.

Hi, Today's setup is : Legacy PBX1 with E1 ------- Leased line ----- Legacy PBX2 with E1 Prospective setup is : PBX1 ------- Asterisk GateWay1 (with Digium E1) ------ IP network ------ Asterisk GW2 (with Digium E1) ----- PBX2 Is there a way to tunnel, transport or translate Q.SIG signals between both PBXs ? The IP network is just used for point to point leased lines replacement :

I have a weird situation. A polycom phone is configured to use system pbx1 as the primary outgoing 'proxy', followed by systems pbx3 and pbx2. All three systems have identical sip.conf files. The phone is registered on pbx1. I shut down the Asterisk application on pbx1. I make a call. The phone sends an INVITE to pbx2. Pbx2 sends back a 407 Proxy Auth message to the phone. The phone sends

In reference to an old post from 2002: http://www.marko.net/asterisk/archives/0203/0103.html How does one go about doing this? Also, what is the present status of the OpenSS7 stack in Asterisk? What can it do now? And is there any possibility in the future of developing a DS3 card for it, if only for the purpose of mostly DACSing? Which is still a level of intelligent call control on the