similar to: trying app_fax.c

After doing an update from SUSE 9.2 to 9.3 and Checking out the latest from CVS, Asterisk crashes on startup with an apparent MySQL (res_config_register) error: # asterisk -vvvgc > asterisk_startup_error1.log asterisk: symbol lookup error: /usr/lib/asterisk/modules/res_config_mysql.so: un defined symbol: ast_cust_config_register The log is shown below. I've seen the posts

I am trying to connect audio through HDMI on a config. aplay - l gives: **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: VT1708B Analog [VT1708B Analog] Subdevices: 2/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 So I change my

Hi Eric, > llvm-main.o: In function `__static_initialization_and_destruction_0': > /usr/lib/gcc/i386-redhat-linux/4.3.2/../../../../include/c++/4.3.2/iostream:77: > undefi\ > ned reference to `std::ios_base::Init::Init()' > /usr/lib/gcc/i386-redhat-linux/4.3.2/../../../../include/c++/4.3.2/iostream:77: > undefi\ > ned reference to `std::ios_base::Init::~Init()'

You now need to compile and install SpanDSP-0.0.6pre3 at least (AGX has been changed). After you've done that - try AGX again. HTH -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Olivier Sent: 11 March 2009 06:16 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users]

Receiving a fax with 1.6.1: == Spawn extension (incoming-pstn-line, fax, 1) exited non-zero on 'DAHDI/4-1' -- Executing [fax at incoming-pstn-line:1] NoOp("DAHDI/4-1", "Fax Detected") in new stack -- Executing [fax at incoming-pstn-line:2] Goto("DAHDI/4-1", "incoming-fax,s,1") in new stack -- Goto (incoming-fax,s,1) --

Thanks for the suggestion, Andre. I downloaded GNAT GPL 2007, and followed the directions on your web page. Now I get a lot of C++ errors. In fact, the output I captured to a log file is over six megabytes just from the start of the problem command to the termination of the make. I'm obviously not going to include it all here, but the command and the first few errors are copied below.

When trying to make outbound calls I am getting the Warning: File app_dial.c line 313 (wait_for_answer) Unable to forward voice. When making the call it attempts to dial (pounds are actually numbers but replaced to not show numbers we are dialing): Executing Dial("Sip/donas-bd7b", Zap/g1/1##########") in new stack Called g1/1########## Channel 1, span 1 got hangup **Above

I just want to pdf and email faxes coming in over pstn on a TDM400P. Outgoing faxes would just go out over pstn, not through asterisk. All the voipinfo , etc, howto's are quite complicated. And most use third party apps like Hylafax. I thought there was a rxfax and txfax in 1.4. And 1.6 had app_fax. I'm now using 1.4.22, but I'd go to 1.6 if it made this easier. But I've

This message is pointed directly to Steve Underwood. I tought it would not be nice to directly email him with a question that interests a good part of the Asterisk community, so here it is. :) Steve, remember a few days ago when we discussed about issues on Asterisk 1.6.1.13 and T.38 fax reception? Well I opened an issue on Mantis (https://issues.asterisk.org/view.php?id=16756) and turns out it

Hello, All. I have a problem with receiving fax through T.30. I'm calling 543 number from fax machine, then start sending fax and fax machine send document without problem. But asterisk don't receive fax. I can't find good documentation for app_fax and I'am googled this errors. Please help me. software: asterisk-1.6.2 OS: ALT Linux 5.0.1 Ark Server hardware: Digium Wildcard

1. Subject. 2. asterisk16-1.6.2.6-1_centos5.src.rpm have not asterisk.logrotate in SOURCES 3. for "--without dahdi" diff SPECS/asterisk16-my.spec SPECS/asterisk16.spec 750a750 > %{_libdir}/asterisk/modules/res_timing_dahdi.so 879d878 < %{_libdir}/asterisk/modules/res_timing_dahdi.so

On 1.6.0.18-rc3 using app_fax.so, spandsp-0.0.5, anytime I use SendFAX asterisk restarts: [Nov 15 19:00:36] VERBOSE[17013] logger.c: -- Executing [s at fax-tx-test:1] ESC[1;36;40mNoOpESC[0;37;40m("ESC[1;35;40mSIP/nhi-rive rside-sip-00000000ESC[0;37;40m", "ESC[1;35;40mContext fax-tx-testESC[0;37;40m") in new stack [Nov 15 19:00:36] VERBOSE[17013] logger.c: --

Hi folks, I am having a small problem with asterisk-1.6.2.7 + app_fax on OpenBSD 4.7 -release. Everything seems to work fine. I have a macro which answers, receives the fax to a tiff, and then runs a script (mailfax) to convert that to pdf and email it. It all works perfectly except for some errors I am seeing in the console. After it hangs up I get a dozen or so messages in the cli

Currently I am having 2 issues with my Avaya 4602 phone: First, the phone registers with my Asterisk server, but when I start dialing I get a busy signal after 4 digits. I specified in the dialplan on the phone to expect 10 digits and that solved that problem, but I still immediately get a busy after the 10th digit. The phone never sends a dial command to asterisk. Second, asterisk is

c:/Ruby193/lib/ruby/gems/1.9.1/gems/rails-2.3.14/lib/rails_generator/options.rb:32:in `default_options'': undefi ned method `write_inheritable_attribute'' for Rails::Generator::Base:Class (NoMethodError) from c:/Ruby193/lib/ruby/gems/1.9.1/gems/rails-2.3.14/lib/rails_generator/base.rb:90:in `<class:Base>'' from

I am having a problem with SpanDSP. What happens is when I send a fax to SpanDSP the fax message seems to fail in the training phase. I think it's a timing error, however I have no idea about how to rectify the problem. I have included a copy of the log below. I am using a Digium TDM-400P card with 2 x FXO ports and 2 x FXS ports. The fax is connected to one of the FXS ports (Zap3). The

Hi all I don't know what went wrong but i no longer seem to be able to compile asterisk. I first do : cd /usr/src/dahdi-linux-2.1.0.4 make clean ; make all ; make install cd /usr/src/dahdi-tools-2.1.0.2 ./configure ; make clean ; make all ; make install ; make config So far.... so good but then when i do : cd /usr/src/asterisk-1.6.0.6 make clean ; ./configure ; make all ; make install i

Hi, I've installed spandsp-0.0.4pre16 With this: cd ~ svn co https://agx-ast-addons.svn.sourceforge.net/svnroot/agx-ast-addons agx-ast-addons<https://agx-ast-addons.svn.sourceforge.net/svnroot/agx-ast-addonsagx-ast-addons> cd agx-ast-addons/trunk ./build.sh I've got this: CMake Error in spandsp-0.0.4/CMakeLists.txt: Cannot find source file "app_fax.c". Tried

Hello all, In app_fax WATCHDOG_TOTAL_TIMEOUT is set to 30 minutes to kill a fax channel regardless of whether or not it completes. In my case I have a fax that really would take longer than 30 minutes to complete. Is there any way to disable the WATCHDOG_TOTAL_TIMEOUT so that it runs to completion? Thanks, Eric -------------- next part -------------- An HTML attachment was

Hi Guys, I've configured a fax support in my system with opensource app_fax/spandsp 0.6 - but there is a problem - if FAX transmission got interrupted - system permanently returns "The call dropped prematurely" - and no fax is submitted. This is sometimes very inconvenient, say if someone have sent a multipage fax with 20 pages, and it got interrupted on 19th page, the person will