similar to: Priority based softhangup

Hi all, I am trying to drop a random channel in asterisk 1.6. The following line in extensions.conf works fine for the first channel exten => 911,4,SoftHangup(DAHDI/1-1) But I need to drop random channel for emergency not any specific one. Can someone show correct syntax for this Thanks smir

Hi, I have a SPA-3000 and would like to use the 911 recipe from http://www.voip-info.org/wiki-Asterisk+tips+911. So I took the simple recipe and modified it slightly: exten => 911,1,ChanIsAvail(SIP/potsoutbound) exten => 911,2,Dial(SIP/potsoutbound/911) exten => 911,3,Hangup() exten => 911,102,SoftHangup(SIP/potsoutbound) exten => 911,103,Wait(1) exten => 911,104,Goto(1) Now,

I am trying to use SoftHangup in my dialplan, but it's either not working or I'm not using it correctly. when i'm on the console, i see: pbx1*CLI> core show channels Channel Location State Application(Data) SIP/vgw1-000000a2 2156181505 at inbound:1 Up AppDial((Outgoing Line)) SIP/143-0000009f s at macro-SaferSIPDial Up Dial(SIP/99302156181505 at vgw1,, 2 active

Hi, I am planning to deploy an Asterisk PBX for 100-200 users. I am not sure about PSTN incoming/outgoing line ratio for SIP users. I mean if you recall dial up internet the common line ratio is 1:10 (one line for 10 users on access server or an E1 for 300 users). Can somebody tell me what is the good ratio for incoming and outgoing analogue/ digital PSTN lines. Regards Smir

Hi, I am trying to implement 911 funtionality in my PBX. A call should drop if all lines are busy. Here is my context nineoneone from extensions.conf [nineoneone] exten => s,1,Set(SET_EMERG_FLAG=0) exten => s,n(checkavail),ChanIsAvail(${EMERGENCY_TRUNK}) exten => s,n,Set(EMERGENCY=1,g) exten => s,n,Set(SET_EMERG_FLAG=1) exten => s,n(dial),Dial(${EMERGENCY_TRUNK}/${EMERGENCY_NUM})

When I place an outbound call from asterisk 1.6.1.12 to a FXO port on my Cisco 1760V 12.4, the channel changes - seemingly incrementing: e.g., in the first call, below, the channel name is "SIP/vgw1-00000075" -- the second call (on the same FXO port after a soft hangup on the CLI) is "SIP/vgw1-00000077" How can I extract this information in the dialplan so that I can use

The following is 'semicolon.Rnw' > \SweaveOpts{engine=R, keep.source=TRUE} > > <<xycig-A, eval=f, echo=f>>= > library(SMIR); data(bronchit); library(KernSmooth) > @ % > > Code for panel A is > <<code-xycig-A, eval=f, echo=t>>= > <<xycig-A>> > @ % Sweave("semicolon") yields the following 'semicolon.tex'

I have 3 analog trunks zap/1, zap/4 and zap/5. zap/5 is the least used line. Would the following work for 911 calls? [e911] exten => 911,1,ChanIsAvail(Zap/1) exten => 911,2,Dial(Zap/1/911) exten => 911,3,Hangup() exten => 911,102,ChanIsAvail(Zap/4) exten => 911,103,Dial(Zap/4/911) exten => 911,104,Hangup() exten => 911,203,ChanIsAvail(Zap/5) exten =>

I'm having some trouble with placing some iax calls over an openvpn: Setup A is a 1.8GHz Celeron, T100P attached to a Zhone Zplex. Setup B is a 266MHz P2, T100P attached to a Zhone Zplex. Setup C is a 700MHz P3, T100P attached to an Adtran TA 750. Setup D is a 233MHz Pentium, with an X100P. Setups A and B are on the same physical network. IAX calls routed between them work fine. Setup D is

Hello, i have a simple but annoying problem. I have the following entry in /etc/asterisk/externsions.conf file: ---<Cut Here>--- exten => 10100,1,Wait(4) exten => 10100,2,Playback(transfer,noanswer) exten => 10100,3,Dial(${PHONE30},30,t) exten => 10100,4,Background(extension) exten => 10100,5,Background(is-curntly-unavail) exten => 10100,6,Voicemail(9999) exten =>

Hi, I'm wondering if someone can share their thoughts on how to implement a system that periodically checks active channels which have been up for more than X minutes and plays/injects a sound file. The idea is to simply warn users that they've been on the phone for quite a while and maybe they should consider hanging up. If the call stays up for more than Y minutes, it is dropped

Hi there, here is my attempt to initiate a "restart when convenient" from a software SIP phone. exten => 588,1,Answer exten => 588,2,Wait(1) exten => 588,3,Playback(restart-convenient) exten => 588,4,Wait(1) exten => 588,5,Authenticate(00000) exten => 588,6,System(/usr/sbin/asterisk -rx "restart when convenient") exten => 588,7,Hangup The problem: We

Hi there, I am running a PBX under asterisk 1.6. I have few FXO analogue lines connecting to PSTN. These lines are in a hunt group. I trying to make my extensions to dial 91, but this is a bit scary, I mean if somebody make an emergency call after hours and without completing call is not able to tell his/her location. How can I make 911 call center to know the exact location of my extension. I

when i issue asterisk -vvv command i get this error please help regards Barbra [app_softhangup.so] => (Hangs up the requested channel) == Registered application 'SoftHangup' [codec_lpc10.so] => (LPC10 2.4kbps (signed linear) Voice Coder) == Registered translator 'lpc10tolin' from format 7 to 6, cost 50 == Registered translator 'lintolpc10' from format 6 to 7,

Hello, Most traditional PBX-es have the ability to use external audio source (e.g. radio tuner) for music on hold. This is also useful because you can let your users listen to radio by dialing some extension. I wanted to achieve the same on asterisk, and chan_alsa seemed the logical choice. I installed ALSA drivers, connected the radio to line-in and added the folowing to extensions.conf: exten

Hi, I created an iaxtel account, and was given a password containing an "@" character. The directory pages imply that they change the web login password only. How do I reset my IAX password so that it is usable in the iax.conf file? Thanks, Steve

Took some examples from voip-info.org to deal with call forwarding etc: exten => _*21*X.,1,NoOp(Unconditional Call Forward on extension ${CALLERID(num)} to ${EXTEN:4}) exten => _*21*X.,n,Set(DB(CFIM/${CALLERID(num)})=${EXTEN:4}) exten => _*21*X.,n,Hangup() Problem is that * don't hangup cleanly: Spawn extension (default, *21*2403, 3) exited non-zero on 'SIP/2401-081e7048'

Hi, is it possible to hangup a channel from another channel? I want to finish a call from another channel, but if I put exten => h,n,HangUp(channelname) it doesn't hangup... Is that correct? Thanks, _________________________________________________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL:

So, tweaking configs, rebuilding this and that... restarting, twiddling, it works (yeah!), but fails on re-boot to work at all. Consistently, though. I believe it comes down to this: I can call out only *after* I've received a call. So, cold boot. Then: modprobe dahdi modprobe wctc4xxp modprobe wcfxo dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.1.0.3

The Asterisk Development Team has announced the release of Asterisk 1.6.2.18. This release is available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/ The release of Asterisk 1.6.2.18 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following is a sample of the issues resolved in this