similar to: Attended transfer and callerID updates forSiemens Openstage phones

Hello, I would like to double check what Echo Cancellation my Digium Card uses. I thought I bought the little more expensive card that integrates EchoCancellation. How can I check? root at sn1:~# zaptel_hardware pci:0000:0b:08.0 wcte12xp+ d161:8000 Wildcard TE121 root at sn1:~# ztcfg -v Zaptel Version: SVN-branch-1.4-r4309 Echo Canceller: MG2 Is MG2 the correct one that I am supposed

Hi, I just got a Xorcom Astribank with 8 FXS but it does not work. So I tried resetting and loading the firmware. But loading just times out. /usr/share/zaptel/xpp_fxloader usb --------- FIRMWARE LOADING: (usb) [1 devices] 'xpp_fxloader'[11561]: USB Firmware /usr/share/zaptel/USB_FW.hex into /dev/bus/usb/002/003

Hi, I noticed that my hint priority stops working when I add to many extensions/channels. It looks like everything exceeding 80 characters is discarded. By stop working I mean the status is and stays "Unavailable". This works exten => *1,hint,SIP/loicvoip1_1&IAX2/loicvoip1_1&SIP/loicvoip1_1_a1 This does not work: exten =>

Hello, I played with the externalIVR application. So far I am able to read digits and play sound files. But how can I leave the application and continue in the dialplan so that I can execute other actions like going to voicemail, or ringing users etc.... Best regards, Lo?c. -- Lo?c DIDELOT MIXvoip S.a. Tel: +352 20 3333 20 Fax: +352 20 3333 90 ldidelot at mixvoip.com http://www.mixvoip.com

Hello, I wanted to relaunch my problem with a quite precise and small question. Could the command "lsusb" affect interrupts when executing it regularly (cron) and if the zaptel pci card is sharing an interrupt with a usb bus? I have a Digium PRI card and a few Xorcom USB Devices. The Digium card seems to share the IRQ with some USB bus. cat /proc/interrupts CPU0 CPU1

JFYI - I run (successfully) agx-addons with 1.4.22 and Etch. Make sure you have the right version of SpanDSP installed (as well as the tiff libraries). -->> -----Original Message----- -->> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- -->> bounces at lists.digium.com] On Behalf Of Loic Didelot -->> Sent: 19 December 2008 20:33

Hello, I recently got a problem I have never seen during my previous installations. I have a Xorcom device with 4 BRI and 8 FXS ports. I use ubuntu Linux and asterisk 1.4.22. Everything works fine but after some time zap channels disappear in asterisk. root at pbx1:~# cat /proc/zaptel/* Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" AMI/CCS NOTOPEN 1 XPP_BRI_TE/00/00/0 Clear

Hi, is anyone on the list using the Siemens Openstage phones together with asterisk? If yes, is it possible to use the programmable keys of these phones together with Asterisk? Thanks for any hints, Stefan -- ******************************************** in-put GbR - Das Linux-Systemhaus Stefan-Michael Guenther Moltkestrasse 49 D-76133 Karlsruhe Tel./Fax : +49 (0)721 / 83044 - 98/93

Hi, Any recent experience to share when using OpenStage phones in SIP mode and Asterisk ? What about provisionning (and localization) ? BLF ? Audio quality ? User acceptance ? Cheers -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20101222/79c2b6bc/attachment.htm>

...described in the README file ;). SpanDSP - 0.0.4 pre 16 LibTiff - >= 3.8 but <4.0 I had to trawl around for the right SpanDSP - but I can e-mail a copy to whomever wants one (drop me a personal e-mail and I'll attach it by return) HTH Andy -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of

, address 2 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.344611] ERR-xpp_usb: XBUS-00: x= usb_listen: usb_submit_urb failed: -19 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353325] INFO-xpp: XBUS-00: [] D= isconnecting Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353373] Zaptel: Master changed = to XBUS-00/XPD-01 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353382] Zaptel: Master changed = to

Hi I am trying to setup asterisk to do a mass deploy of some snom phones. I can't find where i configure asteriks to listen to the multicast address, nor where to set the notify reply. I was hoping to not have to use dhcp options alex -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 197 bytes Desc:

Hi, I've read README file in agx-ast-addons-1.4.17.5.tar.bz2 It says "Install libTiff >=3.8 and <4.0" Should you really use this agx-ast-addons to get app_rxfax and app-_txfax running with latest 1.4.22 ? If positive, should you take this libtiff warning into account ? If positive, where can you find such libtiff version as Debian repository (I didn't check alternate

I'm afraid I already know the answer because I've done a lot of searching, but does anyone know of a softphone that supports a central phone book and paging (like the sip autoanswer option of some hardphones) Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200 david at safedatausa.com

hello, is there some way to notify people in the same pickup group about call from caller to callee? i.e. i have call from 111 to 222 there are 222,333,444 in the same pickup group 333,444 see on the phone (aastra) that 111 calling to 222 and can pickup the call with *8 siemens have this on their sip openstage phones. how they do this? thanks -- --------------------------------------- Marek

Hello, I am having some troubles with Snom phones and maybe someone can help me. Let me say this: BLF and pickup works great with Polycomes and Grandstream etc... So I think my problem might not be Asterisk related but I am not 100% sure. The snom phones subscribe to my extensions (hint priority) as expected. The light blinks (ringing) or is turned on (in the call) as expected. My problem is to

I'm trying to use a Xorcom Astribank wth Ubuntu 8.04, but got no success. I can see the channel bank with lsusb, but when I tried to use zaptel_hardware, or when I try the /etc/init.d/script, they don't see my Channel Bank. I compiled the latest Zaptel 1.4.10, with Astribank's dependecies, fxload and libusb-dev. Anyone have a similiar experience ? Best Regards, -- Guilherme Loch G?es

Hi, I have the following problem. I have 5 phones behind the same nat (canreinvite=yes). it works fine to receive calls and to make calls. sound quality is good, so everything works fine. The poblem is that the phone behind nat cant call each other. It works if canreinvite=no. But i want to do this. Does anyone have an idea? Regards, cjk.

Hello, I am trying to update to dahdi 2.2.1. But somehow the xorcom (2BRI) device does not want to work. I pasted below the information I have. pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader reset pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader usb 'xpp_fxloader'[4937]: --------- FIRMWARE LOADING: (usb) [1 devices] ..Got all 1 devices 'xpp_fxloader'[5003]: ---------

Hi, I am trying to connect a doorbell to a Xorcom device. And the setup is quite simple. But when I push the doorbell all I see on the asterisk cli is: -- Starting simple switch on 'Zap/11-1' [Apr 2 13:00:40] DEBUG[8771]: chan_dahdi.c:6180 ss_thread: not enough digits (and no ambiguous match)... -- Hungup 'Zap/11-1' I defined the extension s,h,i,t,T etc... in my context. Any