similar to: register => 2345:password@sip_proxy/1234

Hi, to register my Asterisk with a SIP provider I use the following syntax, as shown in the default sip.conf: register => 2345:password@sip_proxy where [sip_proxy] type=peer context=from-messagenet host=sip.messagenet.it port=5061 <------------- please note this one!!! 5061 is provider's port I have to register to. This also would work for me: register =>

I want to setup a blind transer for auto forwarding to SIP peer. I have context forwarding looks like this in extension.conf [forwarding] ... exten => 511,1,Dial(SIP/sip_proxy-out) ... This will do the re-invite, which is attendance transfer maybe. But I want a blind transfer by REFER method. How can I do that? I know that the transfer() function may be able to do that. But I don't know

Hello fellow asterisk people! I have Asterisk listening on port 5061 and SER on port 5060. Asterisk is configured as a gateway for ISDN/Analog/H323 and also SIP. My problems are with SIP. I can make incoming calls from SIP to asterisk and to any of the other networks, but when I try to make an outgoing call from Asterisk to SER I see the following in Asterisk: -- Executing

Hi, I have been trying to configure my Asterisk to use a Sip provider for out and incoming calls. I only have one user and password for connect to my sip provider. My sip.conf is: [general] ;disallow=gsm ;allow=ulaw port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context = default ; Default for incoming calls callerid=No

Unstable release in 1.8 series. Overview of changes in lightdm 1.7.2 * Fix incorrectly distributed guest-session apparmor data Overview of changes in lightdm 1.7.1 * Fix .pc file for liblightdm-qt5-3 * Add a new option "autologin-in-background" which lets an autologin happen in a second display while still showing the greeter. * Stop if fail to create default

Hello, I try configuring Quintum DX gateway as link to PSTN for *. Now, I can dial number which is connect to Quintum, and call is diverted to *. I don't know what I should set, if I want call from SIP_phone registred in Asterisk to PSTN via Quitnum. I set in sip.conf account for Quintum [sip_proxy-out] type=peer outboundproxy=QUINTUM_IP , and changed extensions.conf. When

I'm trying to setup a demo where my Asterisk box with a TDM01B (FXO) answers an incoming call and forwards that call to a SIP softphone (X-lite.) Seems all is built/installed okay: # ztcfg -vv Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. I'm pretty new at this and the extensions.conf file is eating my

Hi All Total noob on the list so all help appreciated.... I've successfully installed Asterisk on an IBM A30P Thinkpad using fedora Core 2 (I'm looking at having a mobile PBX for conferences and shows). I've plugged in two Cisco 7960 phones.... The phones register with the Asterisk correctly and I can run the demo's and even the AIX demo through to digium works correctly.......

I'm having trouble with both my Polycom IP600 and IP500 disconnecting calls to the PSTN after about 1 hour. The below log is of a phone call that lasted 1hr 39mins which is my record so far. I cannot figure out what is causing the call to terminate and I am hoping somone on this list can help me. In this example both the phone and the asterisk server have public IP addresses so NAT shoul not

Hey, Im running Asterisk 1.2.2 and im having problems with the audio when bridging calls between the zap interfaces and sip. zap to zap work fine, as do sip to sip (but asterisk isnt in the media stream, as it doesnt need to be) and terminating the call and playing a test message via either sip or zap work fine. Basically, the only time I see this problem is trying to bridge between sip and

Hello fellow asterisk people! I have Asterisk listening on port 5061 and SER on port 5060. Asterisk is configured as a gateway for ISDN/Analog/H323 and also SIP. My problems are with SIP. I can make incoming calls from SIP to asterisk and to any of the other networks, but when I try to make an outgoing call from Asterisk to SER I see the following in Asterisk: -- Executing

What is the relationship between the peer definitions and the register command? In reviewing the sample sip.conf it seems that you can place the "sip_proxY" peer as the hostname. Is this correct? This question adds the the Broadvoice thread and where to place the dtmfmode variable. sip.conf --- (asterisk sample) -------------------------------- ;register =>

Hello! I've been struggling with the documentation for months on this simple subject... I still have not been able to get this concept down... I have 3 sip accounts (PSTN DID's) that come into my asterisk box and give me phone service from my itsp via SIP. I for the life of me have not been able to figure out how to get them to come in to 3 seperate contexts! This must be simple but I

Anyone help me here? I am a newbie so be gentle ;-)...... It worked once and then I played with the configs. I have a static IP address which is on my private network.. Phone is 192.192.192.220 and asterisk server is 192.192.192.22 I have the 7690 with a SIP iamge (Whatever latest is ) I have 3 lines setup with Free World Dial up and have the 4th setup to connect to my asterisk server. Here

> Hello fellow asterisk people! > > I have Asterisk listening on port 5061 and SER on port 5060. > > Asterisk is configured as a gateway for ISDN/Analog/H323 and also SIP. > > My problems are with SIP. I can make incoming calls from SIP to asterisk > and to any of the other networks, but when I try to make an outgoing call > from Asterisk to SER I see the following in

I've got the following set up: Someone calls into my PBX on a single number (via SIP trunk from my carrier), and the get a voice menu of extensions. On one of the extensions, it rings a bunch of internal SIP hardphones, plus ringing my cellphone via a hairpin through the cairrier's SIP/PSTN gateway. The issue is that my cellphone shows my PBX's number, not the original calling

I am new to asterisk and need to dig up some info on how to set it all up. It looks a bit daunting especially all the options available in the .conf files. I have 2 SIP phones, GXP2000 and a budgettone 100. phone1 - 192.168.0.160/24 extension 1000 phone2 - 192.168.0.161/24 extension 1001 Server - 192.168.0.57 I get the following all the time, but can make calls between the 2 extensions,

I've been googling and talking with Libretel about my setup and the fact that incoming calls to my asterisk box through the Libretel number reach my box (I hear the greeting being played) but then don't accept DTMF. Here is a rough diagram of my setup: Asterisk | server | NAT <------------ Libretel | router | Note that there are NO SIP

Hi there, We have plans to install an office (not call center) with the following setup: 200 linksys 942 phones (sip + g711) on a LAN a server with a dual port E1 sangoma and a remora card with 4 fxo modules. So far when we want to setup a linksys phone, we need to use the http interface of each phone, disable/enable a lot of things and plug it into the network. this is not the best scenario for

Can asterisk act as a SIP registrar or location server? I would like to be able for a user agent(client) to register with whatever client they are using as "username@domain-name.com". Rather than the entry/username/password that is setup in the sip.conf file. That way a user could log into any SIP enable client and their calls would follow them around. I have read the sip.conf man pages