similar to: BT ISDN-30 Call Failures

This is concerning an Asterisk 1.4.18 server. We have approximately 70 DID numbers. Incoming calls are placed into the "incoming" context (by zapata.conf) and are routed based on the dialed number. I want to do some manipulation (CallerID name override) to all incoming calls before they are routed. I would prefer to avoid duplicating the necessary code in each DID extension stanza,

I have a PRI E1 link between Asterisk 1.4.24 and Alcatel-Lucent OmniPCX Enterprise R9.0. As EuroISDN it works fine. However, I need to move to QSIG because of a firmware upgrade on the Alcatel PBX which doesn't support EuroISDN (please don't ask why). Besides, I've read somewhere that 2 B Channel Transfers "should" work with * 1.4, the latest 1.4 libpri and QSIG. So this

While testing a problem with "spontaeously" and "occasionally" rebooting asterisk, I came upon this problem: Program received signal SIGSEGV, Segmentation fault. [Switching to Thread -1210770512 (LWP 11346)] 0x002e3fe1 in pri_release_timeout (data=0x93a0478) at q931.c:2589 2589 q931.c: No such file or directory. in q931.c q931.c is in libpri, function

I have been trying to sort this out for a while now but with no luck I have isdn <-> asterisk<-> pabx on a te205 incoming calls work fine outgoing calls seem to work fine but the call is dropped when answered I think it is to do with the line [May 8 17:51:55] WARNING[4762] channel.c: Unexpected control subclass '5' that is causing the problem but I don't know how to

Hello, I have a strange h323 issue. After executing command "Dial("SIP/333-0d1dfe00", "H323/361737052390920 at ccg|5|tT")" at Oct 18 22:32:23. Meanwile I have sniffing traffic on port 1720. The call was established just at Oct 18 22:33:03 (New H.323 Connection created.) and also packet sniffer grabs the h323 invites at this time also. So my question is what

Hi What causes deadlock? Apr 5 14:02:43 WARNING[2413] channel.c: Avoided initial deadlock for '0x82acb10', 10 retries! Apr 5 14:02:43 WARNING[2413] channel.c: Avoided initial deadlock for '0x8298160', 10 retries! Here is the portion of the log: Apr 5 14:02:42 NOTICE[23363] chan_zap.c: Got event 18 (Ring Begin)... Apr 5 14:02:42 VERBOSE[23363] logger.c: -- Executing

I am new to Asterisk and the protocol/language complex world of VoIp and PBX. But I have a dedicated machine running A@H 2.8, a single TDM400P with one FXS module card connected to a standard analog phone. The second card is an X100P connected to my analog PSTN phone line. I also have Grandsteam IP phone plugged into the network and a couple of x-lite SIP softphones. I can make outgoing calls on

Hi All, Hope you all are fine and good, Today i have found that Mine all PRI Channels are restating after every interval of one hour, and i have search and psot on fourms and everyone said that this is a normal behaviour. If this is a normal behaviour is there is any way to stop it { i still don't know what is the reson to restart ever hour } . Because this is listed everywhere that

Hi list! I recently upgraded to FreePBX 2.1.3 although I am not sure if this has something to do with it. I do a nightly restart of Asterisk, just in case. This has been working fine months but since a few days asterisk seems to die and I am not able to restart it again, I keep getting a socket in use message. This is on Asterisk 1.2.12.1, Zaptel 1.2.9.1 and Libpri 1.2.3 This is a snippet

Hi I've suddenly started encountering a strange issue. Sometimes, when a call is made into our system, an extension answered the phone but I can see no mention of it being bridged in the console. Also, the server does not seem to think that it is answered and then goes to voicemail. We are using asterisk 1.4.17 Here is the console output for one of these calls, it was me ringing a

I just had a user report that they called out to someone on a cell phone this morning, and after a short conversation, the call was dropped/lost. The person on the cell phone says that this is very rare, and would not suspect the dropped/lost call to be on their side. I have looked at the asterisk/full log as thoroughly as I can, and have pasted the lines which seem relevant to that call below.

Hi, I set up a ring group. I would like for people who select a certain voice menu option to ring a list of extensions (I have just one extension in there at the moment) and if it doesn't answer to go to an extension's voice mail. I am using a version of asterisk from CVS, last updated a couple of weeks ago. This line in extensions_addtional.conf sends the call to ringgroup 3 if

Hey, I'm up and running fine with 30 Polycom 500s connected to Asterisk 1.2Beta on Cent OS 4.1 with a Digium TE110 connected to a PRI line. Nearly every hour, almost on the hour I get this: Sep 29 23:01:38 VERBOSE[3567] logger.c: -- B-channel 0/1 successfully restarted on span 1 Sep 29 23:01:38 VERBOSE[3567] logger.c: -- B-channel 0/2 successfully restarted on span 1 Sep 29

I have recently moved our asterisk server from our LAN to a Debian Lenny server (Asterisk 1.4.21.2~dfsg-3 ) with a public IP outside our network. Our phones are behind a natted firewall. An ITSP provides a PSTN to SIP termination for incoming calls Public ITSP -->Asterisk server-->Natted firewall-->extension (192.168.1.x) Everything works fine (incoming/outgoing audio etc.) except

Hi, A most peculiar and vexing problem for you all. I hope I have been verbose enough without being a firehose ;) The set up: I have a channel bank, using the r1t1 rhino driver with a rhino T1 card (the channel bank itself is a very legacy piece of equipment)- this supplies FXS for all the house phones. Also, a Wildcard TDM400P, using the wctdm module with 1 FXO module, this supplies FXO to the

Hi people, I have a problem with some extensions. The calls are ended after 31/35 seconds, also, it depends on the number which I call. This is the log, but I've not been able to find something wrong... Any ideas? [Jun 11 15:50:46] DEBUG[26071] app_macro.c: Executed application: ExecIf [Jun 11 15:50:46] VERBOSE[26071] logger.c: -- Executing [s at macro-dialout-trunk:16]

Hello, I'm curious to know how people log their applications in R. It seems like it's a combination of cat statements or writing out the session to a file, given the discussions I've had with people. This is fine for interactive work but is a little lacking for automated systems. To address this, I've written a logging facility modeled on the log4j Java library. The basic concept

Hi! I want to do what subject say. Is there any elegant way to do this: ??? # Silence the log inside the block attached to the method call. def silence_logger orig= nil ObjectSpace.each_object(::Logger) do |logger| logger.info "-" * 80 logger.info "Quieting the log..." orig= logger.level logger.level= ::Logger::FATAL end yield

Hi. I''m trying to use logger from a rails cron job. It works fine, but I''d like the standard ruby behavior of stamping each log with date and time. How do I do this? I''m trying: # Set up out logging require ''logger'' logger = Logger.new(STDERR) logger.level = Logger::INFO RAILS_DEFAULT_LOGGER = logger # Tell rails to log to our logger also The

Hey Guys, I''m trying to mock the Rails Logger for the following code: ... rescue TimeoutError => error $logger.error("#{self.name} Timeout for #{path}: #{error}") and return rescue SocketError => error $logger.error("#{self.name} SocketError for #{path}: #{error}") and return rescue StandardError => error