similar to: SIP codec negotiation / manipulation

Hello, I have been trying to get my coders to work without a conversion. I have read all the available asterisk documentation and support groups without any luck. Here is my issue. (Please feel free to ask questions if you do not understand what I am talking about.) I am using Cisco ATA-186 set to g729 codec. (But it will switch to g711 if sip-server request g711) I have 2 SIP-services to

Hello, I've successfully installed Asterisk from last CVS and configured it for using with DLINK-DG104S as mgcp CPE and PGW2200 as external sip server. All are work fine at G711 codecs, but then I disable all codecs except g729 some calls failed (Not all calls. Some calls passed at g729 succesfully). All my devices configred to use only g729 and I don't see other codecs at mgcp or sip

Hello, I have a problem with movistar in Mexico with a sip calls. Movistar send to me T38 and G729 in the INVITE and they say that I have to ignore T38 and use G729 in the voice call. When a fax call is made Movistar send only T38 in the INVITE. Invite example: v=0 o=GDL-BMSW-12D 19913379 19899826 IN IP4 192.168.1.2 s=sip call c=IN IP4 192.168.1.2 t=0 0 m=audio 6370 RTP/AVP 18 101 a=fmtp:18

Hi all, we have a problem with a reinvite sent by our SIP provider to change audio codec due to the recognition of a fax tone. After that the SIP call session has been established (INVITE and 200 OK) we have the following codec situation: UAC ASTERISK UAS | ASTERISK UAC PROVIDER g711 <----------------------> g711

The scenario we have is fax send/recieve software that ONLY talks T38 and an asterisk box. We have ITSP providers that do NOT talk T38 but G711 only. Does asterisk have the capability to take the T38 call from an ATA or T38 software then bridge/transcode it and do G711 out to the PSTN providers? If not is there another product PAID or FREE software or hardware that can do this easily and

So, I've been able to receive faxes quite reliably through teliax with g711 so far; I think I can live with it. For outbound faxing, I'd really like to get a service that lets me send faxes, but doesn't charge me a monthly fee (I don't send enough faxes to justify it). T.38 is a requirement; I need to know that a fax has gone through at the time I send it (store-and-forward,

Hi list, I'm with a little problem on codec negotiation between a cisco827 and asterisk. My sip.conf is like that: [general] port = 5060 bindaddr = 0.0.0.0 context = default amaflags = default allow=g729 allow=gsm allow=alaw allow=ulaw ;disallow=all and cisco like that: dial-peer voice 6 voip destination-pattern 0T session protocol sipv2 session target ipv4:<asterisk-ip>

Hello, Is there an utility for asterisk for codec conversion? I tried google but i haven' got anything. I am trying to initiate a call with G711 codec to asterisk and i would like asterisk to call a gateway with an g729 codec, therefore making a codec conversion from g711 to g729. I know chan_oh323 does it by specifying the OUT_CODEC variable, but chan_h323 does not. And i was wondering is

We are evaluating starting a small VoIP consumer based platform. What is the best codec to use with customers using primarily DSL as internet connectivity? I know that g729 is the king-all, but I want to know what the rest of the professional are using out there. g729 has a cost involved, so does the cost really offset the performance? Or is it better to go with g711 to start off? We plan

Hi, We have a scenario where inbound calls from an upstream provider (chan_sip) sent downstream (chan_iax2) negotiates only g729 yet RTP media contains g711. Both the upstream and downstream trunks are limited to only offering g729 whilst the initial invite from our upstream provider offers both g711 and g729. Asterisk presumably simply forwards the media from iax2 trunk encapsulation to sip

How can i control the codec for the calls. For example I have 3 SIP phones registered to asterisk The firs two are in the local area network (behind nat)- I want to use g711 between them and to connect directly (canreinvite=yes) and the third is in internet - want all calls to it and from it to use g729 and media to go through asterisk. So if Phone 1 calls Phone 2 the codec to be g711, but when

Ok, I built a test system to duplicate my problem and provide myself a platform that I can mess around with to try and break any features. My problem is G729 pass-through from a gateway to a phone. I think I even have transcoding working, which makes me more confused on what's wrong with my pass-through. It must be a configuration issue. The basics... *CLI> core show version Asterisk

Hello list, I have many IP hardphones like Siemens 300 basic ( old ) , cisco ata.. etc I need: G711 from old phones must be convert to G729 via asterisk and send to provider ( G729 from digium ) I have this problems: oh323 (last version): ------------- asterisk work with this driver ok for old phones, if I only faststart=no . But problem with codec , asterisk can speak with provider (

I have multiple voiceage g729 licenses installed on a RH9 box, and have a remote C7960 configured to use it (low bandwidth). In calls like: Remote C7960 -> g729 -> asterisk -> g711 -> C7960 the audio is oftentimes rather choppy. Changing the remote 7960 to use g711 seems to eliminate/reduce the choppyness. Any ideas on what might be behind this?

I have a connect to * via H.323/g711 from device A and want to connect to B which want for H.323/g729 h323.conf contains disallow=all allow=alaw allow=g729 but outgoing faststart/TCS contains only g711 (from h323_request(format) i think) and so no codec negotiation and no voice. Howto run up g711/H323 -> * -> g729/H323 PS intel's g729 was used. ast 1.0.3-6 PPS stupid -

Asterisk 1.4.32 (Also 1.4.26, 1.4.33) Broadvox ITSP (xxx.xxx.xxx.xxx) Linksys 2102 (yyy.yyy.yyy.yyy) Both peers : canreinvite=yes t38pt_udptl = yes I'm having some trouble getting a T.38 fax call established with Broadvox. During negotiation, Asterisk sends a SIP re-invite (T38 switchover) to Broadvox with the Asterisk server's IP address in the Connection Information (c) instead of

Disclaimer: Yes, I know faxing over G711 is unreliable. :-) We're running Asterisk 1.0.9 which talks to a Audiocodes SIP Gateway. We're running Sipura SPA-2002's as ATA's and faxing within our own voice network is working. If we try and fax out to the world however, we're running into a problem. When the call connects and the modem tones begin to negotiate, our SIP/PSTN

Hello, I'd like to implement some public sip uri's that poeple can call into and get an echo test. Is there a way to force a codec so that users can test various codecs? Something like: echo-test at example.com (negotiates whatever codec, is there a way to figure out what codec was negotiated and tell the user) echo-test-g711 at example.com (forces g711) echo-test-g729 at

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=UTF-8" http-equiv="Content-Type"> <title></title> </head> <body bgcolor="#ffffff" text="#000000"> <font face="Helvetica, Arial, sans-serif">Before ordering I want to be

Hello list, I have many IP hardphone like Siemens 300 basic ( old ) , cisco ata.. etc I need: G711 from old phones must be convert to G729 via asterisk and send to provider I have this problem: oh323 (last version): ------------- asterisk work with this driver ok for old phones, if I only faststart=no . But problem with codec , asterisk can speak with provider ( G729 ) only if I disable