similar to: SIP handset + SLA example

Hi All. I've been experimenting with SLA on Asterisk 1.4.13 (patched up to 1.4.14). I am using a SIP channel for my "trunk" line. On the whole things are good, but I have noticed that if I misdial an outgoing call, i.e. I get 404 "Not Found" in the SIP trace, then the trunk line just drops, rather than presenting an error tone or message to the user.

Fellow asterisk users, I am trying to get Single Line Appearance functionality working on a set of Linksys SPA942 phones and have not been successful. It looks like sla.conf is not getting read, only one phone reads as registered for the shared line, and a busy tone every time the shared extension is dialed. I have followed the documentation [1] and followed through other threads I saw

Has anyone had any success with getting SLA going between 2 SIP phones? (Particularly a set of Cisco 79xx's) The SLA document that comes with the asterisk source is about as clear as mud. Does anyone have a working sip.conf, sla.conf, and extensions.conf that I can use for reference? The part I'm most confused about is how to build the lines in sip.conf and how the phones should

I configured my sla.conf to use with a Polycom phone. I have no idea if I did it right, however, none of the console "sla" commands exist. Do I have to something special to compile in this support, or should it just work out of the box? ~jay

I understand that the Asterisk SLA implementation is somewhat different from most key systems and PBX systems. I also understand that in Asterisk, one does not put an SLA line on hold since it is just a MeetMe conference. However, is there any way to make the BLF flash when the answering party on the Asterisk system presses the hold key on their set and leaves the calling party alone in the

Has anyone done SLA with Polycom phones? I've got a large project coming up where the customer is keen on SLA for trunks and extensions. Trunks will be on a PRI. We may do this with Cisco phones if they work better. Mark Willis

Greetings, Back in September someone asked about documentation for the new SLA feature in 1.4, however they received no replies. I thought I might ask the same question now in December. Apart from sla.conf.sample and a few comments in app_meetme.c I have been unable to find useful documentation. Is anyone using this feature right now? Is there a helpful source for information this highly

Has anyone successfully gotten the features of sla.conf to work with Polycom phones? I would like to get 501's to show 3 shared lines on each of the keys. Particularly I am looking for a sample configuration for the phone, the Asterisk configuration seems simple enough. I've searched and searched and searched and have not found anything, general info about SLA yes, but nothing specific

Hello, every body Anyone set up, the sla sharing line appearances, in asterisk, I'm setting, tha but, don't, work, I change the sla.conf, extensions.conf, and sip.cfg, but don't work fine. Any one, could setup, tha? Regards Carlos Rojas -------------- next part -------------- An HTML attachment was scrubbed... URL:

I'm trying to record all calls including calls that are part of a SLA. Using both monitor and mixmonitor the recording appears to happen (that is, asterisk logging shows it happening) however the file is never written to. It doesn't seem to be possible to use the recording that is part of the meetme app because when the SLA app creates the conference it passes NULL in the options field

Hello, I am looking for a "real life" example of using SLA lines under Asterisk. I'll describe my environment and would like to know how I define it in Asterisk (version 1.4 final). Suppose I have two multi lines phones. The first phone has extension 1 assigned to it, and the second phone has extension 2 assigned to it. Now, I want extension 3 to be available on both phones as

On 8/7/07, raviprakash sunkara <sunkara.raviprakash.feb14 at gmail.com> wrote: > > Hello Russell, > Nice To meet U and Good Morning. I got u r mail-Id from > http://www.asterisk.org/node/48325 > Recently i started the SLA configuration. But i didn't understand the > Flow of its Functionality > One of the My Client Ask to have do deploySLA feature > He Using

Hi, I have a basic router that is shaping traffic, and it seems to be working at the moment. We have a 100Mbit connection to the internet, however we get charged for each mbit that we use and so have to shape/limit the traffic to avoid huge bills and my boss getting cross!! We have a /29 subnets set up as follows: tc qdisc add dev eth0 root tbf rate 0.8Mbit latency 50ms burst 10k tc qdisc add

Howdy, Excuse the neophyte questions... I was wondering: (1) what's involved in setting up a call with encrypted media (I'm on a cable network and don't want my calls snooped); (2) is there a cheat-sheet for configuring Sipura handsets/hardphones like the SPA-942, and in particular for message-waiting indicator and shared-line appearances? (3) my PSTN service provider that I

Hi. I've been researching very deep into SLA in Asterisk 1.4, and am unclear as to if the feature exist. I know the commands and configs are available, but there is no documentation, and I've heard that it will not be supported until 1.4.1. Does anyone have a definitive answer on this? If it is available, is there any documentation on the feature? -Chris

Hello, do you know if it is possible to define the SLA configuration in the database for realtime usage with asterisk? Leandro -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20141114/7c4f09a4/attachment.html>

Hi all, i'm trying from several days to setup a SLA on my machine with some THOMSON 2030. My goal is to bind every F key to an extension (NOT a trunk). So, F1 = 201, F2 = 202, F3 = 203, and so on... I'm googled thousand of pages and many more confusing concepts are in my mind. My server uses extensions with numbering 2XX placed in context 'phones'. I set yet in sip.conf:

Hi guys, I know that this could be considered a bit off the topic, I've just posted this topic at VoIPSEC mailing list but I just thought this could be very interesting for Asterisk community members so I'm posting it here too. So the point is for traditional telephony we expect service availability of 99,999% and what about VoIP providers around the world what is currently available? I

Hello, I'm trying to setup shared lines with Asterisk 1.4.26 and Snom phones. It seems that Asterisk works correctly (I get "State: SLA_TRUNK_STATE_RINGING" from the CLI) but the lamps on the phone are not blinking even if I setup one function key on my phones as shared line with number: <sip:line1 at 192.168.0.123> where line1 is my DAHDI/32 Any hints appreciated. :)

I have read that 1.4 has shared line appearances, which I assume will work with Polycom phones. Has anyone configured this and verified it working? I was going to start playing around with it but wanted to see if anyone else has tackled it yet. Bill -------------- next part -------------- An HTML attachment was scrubbed... URL: