similar to: Follow-up to CALLERID(num) not working

I am having a problem setting the caller ID that shows when I make an outbound call over my PRI line. If I make a call from a SIP phone registered with the Asterisk box the PRI is connected to the correct ID shows on my cell phone. If I make a call from an IAX trunk connected asterisk box calling the same number as call one and setting the caller ID to the same number as call one the caller ID

I have a dialplan that looks like this: [dorecord] exten => _*99XX,1,Verbose(2,Doing custom record) exten => _*99XX,n,Answer() exten => _*99XX,n,Verbose(2,Doing custom record - before wait) exten => _*99XX,n,Wait(0.5) exten => _*99XX,n,Verbose(2,Doing custom record - before record) exten => _*99XX,n,Record(/tmp/prompt${EXTEN:3}.gsm) exten => _*99XX,n,Verbose(2,Doing custom

Jim, and all: Thanks for the response. If I can repeat what you are saying: you don't have to define the multiple lines in sip.conf? For comparison, with my current esi setup, we have 10 outgoing lines. If one line is busy, then the service just rolls to the next number. This is set up with the phone service. That doesn't have to done with outgoing sip lines? Does the dialstatus

We have a client that currently has a Microsoft Lync setup. I must admit I know nothing about this setup. What we would like to be able to do is allow the phones on desks connected to this server the ability to dial something that would allow the phone to access an asterisk box to be able to do an agent login over their LAN. Is there any way to do this? Can the Lync server have a SIP trunk to

I am running asterisk 1.6.0.1. I have a Grandstream GXP280 phone I use for testing. In addition I register a zoiper SIP soft phone. For the Grandstream I have busylevel=1 in sip.conf. If I place a call from the GXP280 to zoiper and then put that call on hold from the zoiper side and then call GXP280's extension, asterisk indicates the phone is ringing. As the GXP280 is a single line phone it

I sent this email a few days ago but did not see any responses to it: > I am running asterisk 1.6.0.1. I have a Grandstream GXP280 phone I use for > testing. In addition I register a zoiper SIP soft phone. > > For the Grandstream I have busylevel=1 in sip.conf. > > If I place a call from the GXP280 to zoiper and then put that call on hold > from the zoiper side and then

Is there a way to inject sound from a sound file into an established call using AMI? I have an established call from which I can record either or both legs. I can additionally "spy" on the call. Is there any way I can play a sound file into the call and not loose the ability for the people to continue talking while listening to the sound file? -- Jim Dickenson mailto:dickenson at

I am trying to get updateconfig working. I found an example of updating configuration files here: http://www.voip-info.org/wiki/index.php?page=Asterisk+Manager+API+Action+Upd ateConfig When I tried it the conf file was updated but the new entry was not added. action:updateconfig reload:no srcfilename:manager.conf dstfilename:manager.conf Action-000000:append Cat-000000:newuser

I have an i686 cpu and when compiling from source I get this error: touch /usr/src/dahdi-linux-2.2.0/drivers/dahdi/xpp/init_fxo_modes.verified Building modules, stage 2. MODPOST WARNING: could not find /usr/src/dahdi-linux-2.2.0/drivers/dahdi/vpmadt032_loader/.vpmadt032_x86_32. o.cmd for /usr/src/dahdi-linux-2.2.0/drivers/dahdi/vpmadt032_loader/vpmadt032_x86_32.o Anyone else seeing this?

Does Asterisk, currently using version 1.4, get any more information about the result of an outbound call made over a PRI line compared to a call via a SIP trunk? As an example, in a PRI call there is this message that shows up on the console: [2011-01-05 14:59:02] -- Channel 23 detected a CED tone from the network. for a call to a fax machine. Does asterisk set anything that a dialplan can

I have this extension: exten => 1322,1,Answer() exten => 1322,n,Set(CfMC_AMDValue="NotChecked") exten => 1322,n,GotoIf($["${CfMC_DoAMD}" != "Yes"]?NOAMD) exten => 1322,n,AMD() exten => 1322,n,Set(CfMC_AMDValue = ${AMDSTATUS}) exten => 1322,n(NOAMD),Wait(1) exten => 1322,n,UserEvent(E1322-1,${CfMC_ActionID}=${CHANNEL} & ${CfMC_AgentToUse}

I have an extension defined like this: exten => do_monitor,1,Answer() exten => do_monitor,n,NoOp(Just got '${CfMC_ActionID}') exten => do_monitor,n,ChanSpy(${CfMC_WhoHear},qX) exten => do_monitor,n,Hangup() I use an AMI packet like this: Action: Originate Channel: Agent/1001 Exten: do_monitor Context: cfmc_cdi_private Priority: 1 Variable: CfMC_ActionID=callE1334 Variable:

I would like to be able to stop the chanspy application and go to the next step in the dialplan but I do not see a way to do that. I have looked at the code and I do not see a way to stop the chanspy application. Even if there are no channels that match the chanprefix pattern the chanspy application is not exited. Hitting the * key stops spying on a channel but then starts spying on the same

[2009-05-27 02:06:16.294] WARNING[6971] chan_dahdi.c: No D-channels available! Using Primary channel 24 as D-channel anyway! [2009-05-27 02:06:16.295] VERBOSE[6971] logger.c: [2009-05-27 02:06:16.295] == Primary D-Channel on span 1 up [2009-05-27 02:06:16.301] ERROR[6971] chan_dahdi.c: !! Got a UA, but i'm in state 7 I noticed the above error many days after this at around 2AM. This

I issue this command: RetryDial(another-time,10,4,SIP/GXP280_18,10,ghM(cfmc_dial_private^RetryAndQ ueue^SIP/GXP280_18)) Asterisk rings the phone for 10 seconds. Asterisk then waits 10 seconds. Asterisk rings again for 10 seconds. I would expect this to happen a total of 4 times. The problem is that after the second ring for 10 seconds Asterisk exits the RetryDial step with HANGUPCAUSE=0 and

I have a PRI line and I am having problems setting the ringtimeout on the dial application to more than 29. If I set ringtimeout to 29 on the dial application call and I do not answer the ringing phone then I correctly get DIALSTATUS set to NOANSWER. If I set ringtimeout to any value over 29 on the dial application call and I do not answer the ringing phone then I go to extension h and have

I have been fighting with the ability to set the caller ID when I make outbound calls via a PRI line as well as via my SIP provider. The more I play around the less I understand. There is a setting in chan_dahdi.conf that seems to say do not pay attention to the CALLERPRES value and just allow the ID to be set. This setting is usecallingpres. If this is set to yes then the value of CALLERPRES

I am still trying to figure out a reasonable way to exit the chanspy application in a dialplan. For the most part I understand how things are working and there is one change I would like to propose. The way the 1.4.23.1 code seems to work is that if there are no channels that match the chanprefix argument the chanspy code stays in a loop waiting for a new channel to come into being that matches

I installed version 1.6.0.3-rc1 and my AMI application stopped working. I reinstalled 1.6.0.1 and it worked again. I reinstalled 1.6.0.3-rc1 and it stopped. Looks like a problem in the software to me. Following the same steps using the same code for the AMI and conf files for * I get bad behavior in 1.6.0.3-rc1 and good behavior in 1.6.0.1. I have this action: Action: Originate Channel:

I work at home with standard residential cable Internet service and I wanted to test CPA for use with our dialer solution. The first problem I ran into is that CPA only works with a SIP provider that does IP based authentication opposed to usename/password authentication. After I got an account setup to solve that problem I thought I was on my way to being able to test. No so. I got asterisk