similar to: Getting: Can't fix up channel from 5 to 7 because 7 is already in use, and pri_dchannel: Answer requested on channel 0/7 not in use on span 1

Hi all, I've done this a few times with other PBX's but swyx has stumped me! I'm having some trouble getting Asterisk connected to a Swyx system using a sangoma A104dx... currently the setup is: BT <-> Swyx The above setup works fine... what i'm trying to achieve is BT & SIP Trunks <-> Asterisk <-> Swyx I have connected to our BT (2 x ISDN30 UK) with

I am getting: NOTICE[180235]: chan_zap.c:7358 pri_dchannel: PRI got event: 6 on Primary D-channel of span 1 on my asterisk box and it seems to be causing a poping sound in the phones, I am wondering if anyone can shed some light on this. I have scanned the archives and get possibilities ranging form motherboards, to pri, to loaded module problems. Can someone tell me the best way to start

I have a serious problem that repeats very often, after 30 - 50 calls and I can only solve it by stopped and restarting * :-( After a while, * seems to loose track of something. When an ISDN call from PBX needs to go to the Telco, I get 'Ring requested on unconfigured channel 255/255 span 2' It's always channel 255/255 ??, the 'span' number is random Setup: * between Local

Just throwing out this question. integrating with Altiware server. PRI appears to be okay. It keeps trying to move my call to a different channel...usually channel 1. This is the deal here: Moving call from channel 23 to channel 1 Then the following errors after no audio then hanging up manually: Mar 24 17:46:17 WARNING[1315]: chan_zap.c:7792 pri_fixup_principle: Call specified, but not

Hello, I have a situation where a remote worker dials in to the asterisk server, enters the "secret code", then dials out via Disa on a PRI. This was all working great until this morning. Now the calls is placed out, connected but there is no voice from/to either phone. This is what shows on the CLI when the calls is bridged at a verbose of 4 and a debug of 1: [Jan 25 17:51:40] --

Hi, I still cant dial out on Zap and I really have no clue why. I'm using Asterisk Asterisk 1.2.6 and Zaptel 1.2.5 with Digium card 4 ports, 31 channels each and able to receive incoming calls and fax perfectly. I've done this in my dial plan. exten => 111,1,Answer() exten => 111,n,Ringing() exten => 111,n,Wait(2) exten => 111,n,AbsoluteTimeout(30) exten =>

I'm not sure if it's the same problem but your error message likely the same. after i additing pridialplan=local in the zapata.conf i'm able to make outboundcalls (located in germany) marcus -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Gesendet: Dienstag, 11. April 2006 16:33 An:

hello all, i'm using TE110P and all configuration prosess is done. but after i do the 'modprobe' for zaptel and wcte11xp, follow by ztcfg -vv and asterisk -vvvgc i have this error. *CLI> May 27 14:44:33 WARNING[3059]: chan_zap.c:8534 pri_dchannel: PRI Error: We think we're the network, but they think they're the network, too. May 27 14:44:34 WARNING[3059]: chan_zap.c:8534

Hi, in a PRI setup, the receiving side is changing the B channel at proceeding. It seems this sometimes breaks some logic (pri_fixup_principle) and then the hangup kind of breaks, release is not answered and a restart cycle is triggered (by remote side). Anyone can help me debug this ? I've seen many posts with simmilar issues but no answer/solution. This is happening on Asterisk 1.2.16 +

Hi all, I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns QuadBRI running in NT-mode. Connected to the BRI-Ports are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34) which are only operating in dial out analog mode to deliver fax messages. After a while of running fine (50-200 dial out connections) on some S0 spans the following message occurs

Hi, I got a problem with PRI that I'm not sure how to solve. Asterisk sits between PABX and PRI. PRI is span 1 and PABX is span 2. After every single call (no matter in what direction) I get "pri_fixup_principle: Call specified, but not found?" and "pri_dchannel: Hangup on bad channel" messages and the channel in question is restarted. As far as I can see, all

I receive this error on the asterisk console and it is pretty much ALWAYS coming up. Sometimes there will be a break where it does not display. We had our PRI provider test the lines and they claim that there is no signalling problem. It doesn't matter if there are no calls or if there are 10 calls in progress the error is still displayed. I also get an annoying popping or clicking sound

What am I doing wrong here? Why is this happening? libpri is version 1.0.7-1 (debian package) asterisk is version 1.0.7.dfsg.1-2 (debian package) zaptel is version 1.0.9.2 -- Executing Dial("SIP/739-5935", "Zap/g1/0916000739") in new stack -- Called g1/0916000739 -- Channel 0/1, span 1 got hangup Oct 10 13:14:45 WARNING[7544]: app_dial.c:412 wait_for_answer:

Hello list i have an issue with my dahdi_channels.conf in span 1 when i use it like below i can do my outband calls without issue ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) group=0,11 context=from-pstn switchtype = euroisdn signalling = pri_cpe channel => 17-31 context = default group = 63 but when i add in channel 1-15 like: channel => 1-15,17-31 i receive all

Hi all, So, we reverted the LibPRI version and tested it, and then tried with the latest version of everything. Still no changes. The BRI line is in PTMP. If we set the configs to PTMP in the genconf_parameters and try it, we get the following: [Jan 21 17:32:20] ERROR[20341]: chan_dahdi.c:12645 dahdi_pri_error: Unable to receive TEI from network! If we set it to PTP (which it is not) we

I'm running an E400P. Every now and then Asterisk stops receiving incoming calls. This turns up in the messages log: Nov 25 10:49:12 WARNING[65541]: File chan_zap.c, Line 5793 (pri_dchannel): Ring requested on channel 1 already in use on span 1. Hanging up owner. Nov 25 10:49:15 WARNING[81926]: File chan_zap.c, Line 5793 (pri_dchannel): Ring requested on channel 1 already in use on

Hi all, I just posted this question before last week. Meanwhile after upgrading Asterisk 1.0.7-BRIstuffed-0.2.0-RCg to 1.0.8-BRIstuffed-0.2.0-RCh the same problem occurs, but seems to be more seldom. Attached is now the output of "zap show channel" . - I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns OctoBRI running in NT-mode.

i need your help regarding some issue related to the outband calls i have installed asterisk 1.4.32 with dahdi and i have 1 card diguim with 2 ports when i try to call my phone number all time i receive message busy number this error just with g1. with g2 there is no problem i can call without issue can anyone see the CLI and tell me what is the problem thanks and regards == Parsing

Hi, I am getting this message on the * console on my first pri span. Pri show span show it is down, and I can't make any calls from the span. Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27

Hi fellow asterisk users, I am running Asterisk 1.4.29 with an Digium TE121 card (wcte12xp kernel module) an approx. 100 snom320. The whole installation is running without issues since 5 months. Without having changed anything on the asterisk server for at least 2 months, i noticed "clicking sounds" at external calls over the PRI. Asterisk constantly throws the following messages: ...