similar to: Do i need install Dahdi or libpri ?

Does anyone have any information for me? Welinghton. Citando Welinghton Magno Guimaraes <welinghton.guimaraes at ufvjm.edu.br>: > Hello! > ? > I am setting up an Asterisk server with a Mediant 1000 (Audiocodes) > to make external links. Does anyone have any manual or instructions on > how to proceed? > ? > Asterisk ?=>? Mediant 1000 (AudioCodes) ?=>?

Greetings... We've been having some interoperability issues between Asterisk and an AudioCodes Mediant 2000, and, well, I gotta use the Mediant 2000 somewhere. So, I've been pondering using iptel.org's SIP server (SIP Express Router) as a "front end" for PSTN calls going out to the Mediant, while using Asterisk for everything else. Has anyone done something similar, or

Hello my friends, I want to make fax work in the following scenario: My versions are: Asterisk 1.4.21.2 WANPIPE Release: 3.4.7 Zaptel Version: 1.4.11 libpri version: 1.4.5 Digium Card TDM 410P The E1 pri is connected to our Sangoma A102DE, we also have a SIP Mediant Audiocodes 1000 where we have some fax machines connected to fxs ports, what we need is to make fax machines through mediant

I just put in a Audiocodes Mediant 1000, which seems to be working well except for one annoyance. I am using Polycom 501's and 601',s and if I do a supervised transfer of a PSTN call where I complete the transfer before the 3rd party has answered, the PSTN party hears dead air until the call is answered or goes to voicemail. I'm not really sure where to start my troubleshooting. Any

I'm currently looking to interconnect my Asterisk PBX system with the PSTN via a digital PRI/T1. I know a multitude of options exist for internal PCI cards (Digium/Sangoma/Rhino), I was wondering if anyone has any experience or recommendations of external PRI media gateways that support SIP. So far I've found: VegaStream Vega 400 Audiocodes Mediant 2000 MediaTrix 1531 However they are

Hi FOlks, I am trying to setup remotely an "AudioCodes Mediant 2000" MG Module 2 to work with Asterisk through SIP or H323. But since I don't the product manual, it's being a little hard. Anybody would the manual in PDF(file or URL) to indicate to me? Thanks a lot, Isamar

Dear ALL I have audiocode MP -124 with configure in asterisk Endpoint configuration means every analog phone register in asterisk now thing is that i have one more SIP trunk with mediant 2000 [auodiocode-mp-124]-----[ * ]------[mediant 2000]-----E1 When i call from audiocode MP -124 phone i got this error -- Executing Dial("SIP/20-0889c4d8", "SIP/mediant/1")

Hi all, I am planning to use VoIP gateways to connect remote offices to Asterisk. Not having much experience with these and Asterisk I would appreciate any info/experience that you might share with me as to their interoperability with Asterisk. I am interested with in rather bigger gateways (order of E1's) from: AudioCodes - Mediant Mediatrix - 1531 Quintum tenor Multupath D3000 Has anyone

Hello, i just made the reproducible watching: I send a Fax from asterisk (trunk) with spandsp (latest snapshot) via T.38 -> Audiocodes Mediant 2000 (FW 5.60.43.5) -> PSTN Fax With Internal timing Enabled, the Fax break after the first quarter from the first page is transfered. With Internal timing Disabled, the fax is transferred flawless. Both test with pthread timing module on a QEMU

Has anyone had success patching chan_sip.c so that Asterisk will recognize the tel: header for RDNIS information? exten = get_in_brackets(tmp); if (!strncasecmp(exten, "sip:", 4)) { exten += 4; } else if (!strncasecmp(exten, "sips:", 5)) { exten += 5; } else { ast_log(LOG_WARNING, "Huh? Not an

Is anyone on this list using and audiocodes FXO gateway? I have Asterisk(1.07 on OS X) setup and working fine, including SIP phones and IAX2 phones - I can make outbound calls just fine and receive inbound calls just fine. However, I can't seem to find the right series of DTMF settings on the AudioCodes to allow DTMF tones to be sent after an outbound call is connected(phone banking,

Has anyone used the AudioCodes MP-20x? http://audiocodes.com/Objects/Analog_Telephone_Adapter_Series_MP_20X.pdf Seems like a good device, but I can't seem to find anyone actually using them... -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061022/6ca85b8c/attachment.htm

Dear all anyone have idea about connect asterisk with mediant 2000 audiocode configuration ... anybody have configuration about it --------------------------------- Get your own web address. Have a HUGE year through Yahoo! Small Business. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Thanks James, What i need is to make the fax machines connected to the audiocodes mediant 1000 be able to send and receive fax throught Asterisk (connected to a pri) I know it's not reliable, but it should work at leaste, what should i do on Asterisk and Mediant to make this work? Im quite confuse with all these fax issues :S Thanks in advance > > Message: 11 > Date: Fri, 9 Apr

Hello List. We are having some problems using t.38 together with a Cisco voice router at one of our providers end. We are using the new digium asterisk fax module to generate the fax, and when we use together with our internal Audiocodes Mediant 2000 gateways, we have no issues what so ever, and the faxes go right through. When we send faxes to our other provider, who has cisco hardware

Hi, I am configuring an audiocodes Medant1000 to talk to my asterisk box. So far I have successfull in landing a single call from mediant to my *box. my sip conf is as follows: [general] context=sip bindport=5060 bindaddr=0.0.0.0 srvlookup=yes [3911700] type=friend host=dynamic dtmfmode=info secret=blah context=sip where 3911700 is my E1 telephone no. in my extensions.conf I have exten =>

I sent this yesterday, but saw zero traffic, so I think it got lost in the ether, so I'm sending again. I'm having an issue using Asterisk 1.2.14 and an Audiocodes Mediant 1000 ISDN gateway. For the most part, everything is working except for attended transfers. When I do an attended transfer, and complete the transfer before the 3rd party answers, the PSTN side hears dead air until the

Hello Everyone, I must deploy an asterisk system that can support at least 500 pstn outbound calls. It's a challenge as it's the first time i'm gonna build such a large system. I want to have your advice on hardware, software and so on . What i have in my plan is a cluster of servers with quad PRI cards. I will appreciate your advice. Thank you all . --

Greetings... I'm working on getting an AudioCodes Mediant 2000 big box o' PRI's going with Asterisk, and am running into a problem with DTMF handling. The box is sending DTMF packets to Asterisk as INFO packets, and they are apparently being seen by Asterisk. However, the DTMF knowledge doesn't seem to actually do anything -- the VM system doesn't recognize the digits,

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 186 bytes Desc: OpenPGP digital signature Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20061103/b35592e2/signature.pgp