similar to: outgoing callerid problem

Hi, I've run into a veird problem. I'm using a B400P BRI and an A1200P card with dahdi (2.2.1) driver. The dahdi_scan shows the each moduls and spans, everything seems fine. With dahdi_genconf I made the config, set up the channels in chan_dahdi.conf, but after reboot, the two card changes the order, (originaly the B400P is the first (closer to the processor) and A1200P is the

Hi i've got an openvox a800p01 with 1 FXO and 4 FSX i've done the following: - downloaded zaptel-1.4.7.1 > >> - downloaded the file opvxa1200.c > >> - copied in zaptel-1.4.7.1/ > >> - edited makefile adding opvxa1200 in the modules and the voice > >> opvxa1200.o : zaptel.h wctdm.h > >> - edited zaptel.sysconfig adding MODULES="$MODULES

Hi all, Does anyone have any good/bad comments on the A1200P 12-port fxo/fxs card from OpenVox? I'll be using one to with 8-12 fxo interfaces.? The cards will be plugging into a cable-modem / phone adapter.? We weren't able to port the numbers, so we're going to use the existing PSTN connection and replace all of the office phones. With these short distances, will I need to worry

Hi, I have a B400P BRI card with point-to-point connection (signalling: bri_cpe) with this dmesg: http://pastebin.com/sXrRt1yM When i restart asterisk server, the card cannot connect to the telco, the control led flashes red. If I unplug the cable between the ISDN nt and the card and wait 40 sec, the card can connect and works properly. The telco says the asterisk crashes the connection

Hi, I run into a problem and I'm not shure what do I misconfigure. I've a B410P ISDN card with bri_cpe signalling and two Openvox (A1200, A800) cards with fxo_ks signalling, all with dahdi drivers. I can receive fax from a public number, but I can't send fax. The CLI says it picks up the line but no dialing. I tried the extension with an analog phone, it works fine, I can dial

Hi, I need a feature from asterisk with dahdi channels, if there is an incoming call, it should ring on several dahdi channels. My channels look like: OFFICE1=DAHDI/13,,rtT OFFICE2=DAHDI/14,,rtT If I add this line: exten => 12345678,1,Dial(${OFFICE1}&{OFFICE2}) only OFFICE1 rings. If I change it to exten => 12345678,1,Dial(DAHDI/13&DAHDI/14) DAHDI/13 and 14 rings together,

Although I see similar, but more complex, questions addressed in the help archive, I'm having trouble adding superscripted text to the y-axis labels of some figures, and I can't find anything in the R documentation on this. I have: ylab="BA (m2/ha)" but I want the "2" to be superscripted. Thanks in advence for the help, or for pointing out the appropriate help file.

Was'nt sure if this mail got through earlier: I have been having a weird issue with my telco's ISDN PRI occasionally resetting on a incoming call, i suspect it to possibly be a timing issue since some of the incoming call work. This problem happens very frequently. I am using asterisk-1.6.0.1 with libpri-1.4.9, the asterisk server is connected viw TDMoE to a Redfone Fonebridge into

Hello, I am running Asterisk 11.17 with DAHDI 2.9.0 and an OpenVox A800P with 8x analog POTS lines coming into my Asterisk server from the phone company. Internally, I have about 180 SIP clients defined in sip.conf. What appears to be happening is that if existing calls are consuming all 8 external lines and a new SIP client attempts to make a call, an existing call gets dropped. The asterisk

Hi all, After a forced reboot of the host machine... my VM lost the eth0 interface... ifconfig eth0 device not found Please help Thanks in advence Yassine _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, IF i use a sip softphone or a iax softphone with asterisk, i get a lag of about 1 second. The two phones were on 2 different pc's near me. When I speak on one, i hear it on the other after about 1 second. I tried using iaxComm, Xten Xlite, etc. Same. FYI: The codec used was GSM. Using the fxo and fxs interfaces on the digium cards with POTS have no such issues. Any clue where the

My outgoing FXO calls are answered but have no audio in either direction if I have callprogress=no in chan_dahdi.conf. If I change to callprogress=yes then the audio returns. My chan_dahdi.conf file is listed below. Can anyone point-out why callprogress=no isn't working? #cat /tmp/a [trunkgroups] [channels] language=en context=incoming toneduration=40 ;usedistinctiveringdetection=yes

hello, all of users: there are header files missed when you compile dahdi with kernel-2.6.29 or 2.6.33. i believe that few files are affected: wctdm.c dahdi-base.c wcb4xxp/base.c, opvxa1200.c... the errors look like these: ================================================ from?/usr/src/dahdi-linux-complete-2.2.0.2+2.2.0/linux/drivers/dahdi/dahdi-base.c:61:

i have the following constructed and running very well,, thanks to Gabor Grothendieck for his help. >data.info <- c("station.id", "year", "date", "max.discharge") > > for(i in 1:num.files) { + station.id <- substring(data[i], 1,8) + DF <- read.table(data[i], sep=",", blank.lines.skip = TRUE) + z <- zoo(DF[,4],

Hi, I try to compile mISDN 1_1_9_2 (kernel: 2.6.32.13). I had the following compiling error: make[1]: Entering directory `/usr/src/linux-2.6.32.13' CC [M] /usr/src/mISDN-1_1_9_2/drivers/isdn/hardware/mISDN/sysfs_obj.o /usr/src/mISDN-1_1_9_2/drivers/isdn/hardware/mISDN/sysfs_obj.c: In function ?mISDN_register_sysfs_obj?:

Hello guys, I am having some problems with calls comming from the PSTN lines, when somebody calls people can't hear me, but I can hear them, every day I have to do a /etc/init.d/asterisk stop && /etc/init.d/dahdi restart to have calls with sound again, wich cli dubug commands can I use to see what is going on, here I have my chan_dahdi.conf and sip.conf, I am using 1.6 Thanks a lot!

I have a samba 3.0.2 working as a PDC with ldap as a authentication backend, how to setup logon hours for users? thanks in advence luk

I installed a new machine with CentOS 5.2, Zaptel 1.4.11 and Asterisk 1.4.21.2 and an OpenVox A1200P card. This card has its own driver and Zaptel has been patched to use it. The problem is that from the moment I load Zaptel I get this messages on the console: buffer re-sync occur from 2 to 1 buffer re-sync occur from 1 to 0 buffer re-sync occur from 0 to 1 buffer re-sync occur from 1 to 0

Hi, I''m using CentOS 5.5 x86_64 xen 3.43 from gitco.de and I have an Openvox A1200P voip card and am passing it thru to another centos 5.5 DomU, when I 1st start the domain driver loads and everything seems quite nice and the device works, but after a reboor of the DomU, this is shown on my Dom0 dmesg Here''s Dom0 info [root@xen ~]# dmesg Bootdata ok (command line is ro

Hi, I''m using CentOS 5.5 x86_64 xen 3.43 from gitco.de and I have an Openvox A1200P voip card and am passing it thru to another centos 5.5 DomU, when I 1st start the domain driver loads and everything seems quite nice and the device works, but after a reboor of the DomU, this is shown on my Dom0 dmesg Here''s Dom0 info [root@xen ~]# dmesg Bootdata ok (command line is ro