similar to: Strange Problem

Hello List, I think I've discovered a little bug in t.38 bug in 1.6.0.22 regarding the speed (T38MaxBitRate) used to send the faxes. Asterisk always responds with a=T38MaxBitRate:2400. I've tried with Patton and Grandstream devices and the result is always the same. Patton ignores the parameter and sends the fax at 9600.

Hello list! I'm having a strange problem with the VoIP Gateway that I'm using to go on the PSTN: if the number on the other end is busy or unavailable I hear an initial RING, generated by Asterisk from what I'm seeing and after that the line goes down with busy signal: Here is the scenario: Softphone *ASTERISK

Dear * users, in your opinion, when using a * as a public server, is good practice enabling nat=yes in sip.conf for all the peers? Can anyone imagine a scenario when enabling this parameter (even for peers that don't require it) can cause problems? Regards and thanks in advance, Alex -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi List, Is there any way by which we can remove asterisk from machine without deleting folder manually? I did google and gets various solution by no success. even after deleted asterisk will be there ..... ----- Thanks and regards Virendra Bhati +91-9172341457 Asterisk Engineer -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello Does anyone have any experience with configuring BT (British Telecom) ISDN2e lines to work with Patton SmartNodes - and then Asterisk? I have a Patton SmartNode 4638, which is now connected to 3 x ISDN2e lines - and in turn connected to our internal LAN. I'm having huge issues configuring the SmartNode to successfully "see" the ISDN channels - and to be honest, I'm

Hi, we have and Asterisk server connected to a Patton Smartnode 4638 with 4 BRI. We configured 4 SIP account on Patton (1001, 1002, 1003, 1004). The system is fully functional, but we have a problem to recognize incoming calls from Asterisk: when a call come from SIP/1001 (BRI 1 on Patton) or SIP/1002 (BRI 2) or SIP/1003 (BRI 3) Asterisk record a call coming from SIP/1004. I have contacted Patton

I have been given a Patton SmartNode 4114 and asked to get it working as POPS gateway for our asterisk box. The 4114 has 4 FXO ports. It's got firmware 3.21 on it. I currently have a single POPS line plugged into port 0. I can not seem to get the two to talk together. I am running asterisk 1.2.21.1. I am seeing the following repeatedly in * Jan 24 16:23:40 NOTICE[17063]: chan_sip.c:11291

Dear fellow list readers This is the situation: ISDN Devices => Patton ISDN to SIP GW => Asterisk PJSIP The Patton GW resides on a dynamic IP address, so I cannot really use match=ip in the identify section. The Patton does not send a line parameter. The ISDN Devices behind the patton have different MSN and should be able to send them in the From: Header, so the default endpoint

Hey Everyone, i am using Asterisk 1.4.21.1 with a old Patton SN1400 and some SNOM 300,320,360 Devices. In the combination with asterisk and the patton, there are occuring some strange behaviour, due to the calling and answering everything works good, clear voice, great availability. All the devices have to use ulaw, alaw and slinear is available but never the first choice since i use my

Hi, I succesfully install spandsp chan_misdn and digium card. the rxfax works fine and I get the fax result by email. I would like to do the same using a Patton gw + zaptel but I can't receive fax anymore, the call comes in from ISDN in the Patton gw, patton sends it to asterisk, asterisk run a macro to make a tif file using rxfax, the tif file is correctly created but with a 0 size the call

Hi, 1. Has someone met any success at all, connecting a Digium B410P to a Patton Smartnode 4638 (with latest 5.3 firmware) ? 2. If positive, then, which signalling was used on both sides ? My project's goal is use a Patton Smartnode 4638 to act as telco BRI lines, from a B410P-enabled asterisk box. In my testings, I can see channel is respectively up (with patton web server status page)

Hello list, I need a hand to find the best dialplan failover solution when using two SIP Trunks. My reasons to do failover are: a) one of the two providers could be unreachable b) both providers may be UP but one of them could return a SIP error message (maybe caused by DOWN E1s) Googling I found a few possible solutions: 1.

Hi all, I've been using telephone cards for 4-5 years and now I'm considering the Patton gateways. What are the pro and cons of Patton stuff compared to internal cards in a production system? Someone say external gateway are better because has no echo but have a longer delay when placing calls. Any suggestion appreciated. Thank you! Giorgio

Any have any success using a patton smartnode 4118/js/eiu fxs gateway with asterisk? We we're able to get the unit to register with asterisk, but when trying to place a call, no codec was compatible, even though I had all of the following enabled on the patton ... # G.711 A-Law/?-Law (64kbps) # G.726 (ADPCM 40, 32, 24, 16 kpbs) # G.723.1 (5.3 or 6.3 kbps) # G.729ab (8kbps) the link to this

I have a patton 1400 setup to handle the bri interface. As a trixbox user, I wanted a sip trunk rather than having to re-compile bri support into trixbix. Anyway, I have it working now so that asterisk can make calls and they are passed properly to the telephone network. Incoming calls however are another matter. I have (after turning on cli debug in the 1400) determined that its getting stuck

Hi all, I install the last version of Asterisk and I tried to send faxes, but nothing works. Here is my configuration: Analog Fax <----> IP <----> Asterisk <----> IP <----> Patton M-ATA <----> Analog Fax 2 I tried Analog Fax 2 -> Analog Fax but nothing works!! In the Patton configuration I put G711 and no silence suppression. In asterisk I have

Hello Does anyone have any experience with configuring BT (British Telecom) ISDN2e lines to work with Patton SmartNodes? I have a Patton SmartNode 4638, which is now connected to 3 x ISDN2e lines - and in turn connected to our internal LAN. I'm having huge issues configuring the SmartNode to successfully "see" the ISDN channels - and to be honest, I'm lost as to how to then

Hi, Has anyone met something like this ? dialor*CLI> sip show peers Name/username Host Dyn Nat ACL Port Status 7541/7541 (Unspecified) D 0 UNKNOWN 7540/7540 (Unspecified) D 0 UNKNOWN 7534/7534 (Unspecified) D 0 UNKNOWN 7533/7533 (Unspecified)

Hi, My setup is: IPPhone1 --- Asterisk1 with B410P ---- Patton 4638 --- Asterisk2 --- IPPhone2 I want to evaluate Asterisk1 in TE/PtmP mode. So, Patton box is configured in NT/PtmP (with 3 BRI links between both systems). Anyway, asterisk -rx "pri show spans" keeps replying : PRI span 1/0: Provisioned, Down, Active PRI span 2/0: Provisioned, Down, Active PRI span 3/0: Provisioned,

Hello, I've configured with the very same script 1 Intel Xeon and 1 Intel Pentium4 machines. On one MOH is working properly On the other, I can read on console, lines such as those bellow but I can't hear anything. In which direction, should I further investigate ? If this help, here is my setup: me ---<PSTN-ISDN> ---- Patton 4638 ---<SIP>--- Asterisk 1.6.1.18 --