similar to: Asterisk 1.4.28 intermittent one way audio?

Hi All, I've been testing reliability with t.38 faxing pass through with * 1.4.21.1, Linksys ATA's 2102 x 2, Sharp UX-B800SE and Cannon ImageClass D880. cannon> <2102 #1> <SIP> <*> <SIP> <2102 #2> <sharp Started out with default settings on all devices, configured Asterisk to handle T.38 pass through, the configuration I believe is solid. I get

Hi All, I upgraded a PBX from 1.2. to 1.4.21.1 and I'm noticing that the hints for SIP channels are not updating the phones 100% of the time. The hints seem to work for some time, then the notification on the phone will hang in either and on or off state. During this condition, on the PBX, >core show hints, indicates the correct presence state for the SIP channel. Also if multiple

Hi, I have a 1.2.4 asterisk box at a remote location, which is using IAX2 to connect to a 1.2.5 box for PSTN. There are 15 users on the remote server, all connecting via SIP softphones. For some reason, there is an increasing number of calls where the callee does not get any audio although the caller can hear them perfectly. This happens between 5% and 10% of the time. If they hang up and call

On Wed, Jan 20, 2010 at 2:42 PM, JR Richardson <jmr.richardson at gmail.com> wrote: > Hi All, > > I'm using Asterisk 1.4 branch and checking the status of some SIP > Peers with the functions ${SIPPEER(101:status)} and the result is "OK > (48 ms)". ?Seems to work fine. > > Now I would like to use the function CUT to set a variable with the > 'OK'

On 6/26/07, JR Richardson <jmr.richardson at gmail.com> wrote: > Hi All, > > I have Asterisk 1.2.9.1 sending SIP calls to a Cisco 2620XM Router > with a PRI card in it, handing off to a PBX and vise verse. Calls in > and out are working fine except for DTMF from Asterisk to the 2600. > DTMF from the 2600 to Asterisk is fine. > > Here are the Asterisk console warnings

The best type of error possible, intermittent. We have PSTN numbers being switched to SIP then forwarded to our Asterisk server which sits inside our LAN Every once and a while (maybe 1 out of every 20 calls) goes like this: -- Executing Answer("SIP/213.199.36.50-0818e3e8", "") in new stack -- Executing Ringing("SIP/213.199.36.50-0818e3e8", "") in

I think you are absolutely right. The audio I heard earlier sounds exactly like a timing issue. So: wanpipe1.conf: TE_CLOCK = NORMAL TE_REF_CLOCK = 0 wanpipe2.conf: TE_CLOCK = MASTER TE_REF_CLOCK = 1 zaptel.conf: span=1,1,0,esf,b8zs span=2,0,0,esf,b8zs I'm going to make this change and reload at lunchtime, I'll document it and post it to the list if it works.

Followup on this issue, it appears that using a single PRI's clock as the master clock avoids clock drift between the PRI's and we get no more artifacts. So, : wanpipe1.conf: TE_CLOCK = NORMAL TE_REF_CLOCK = 0 wanpipe2.conf: TE_CLOCK = MASTER TE_REF_CLOCK = 1 zaptel.conf: span=1,1,0,esf,b8zs span=2,0,0,esf,b8zs -----Original Message----- From: Michael L. Young

Hi All, Call comes into Asterisk Asterisk answers and Dials SIP Phone SIP phone has call forward enabled to a long distance number Asterisk receives a SIP response 302 "Moved Temporarily" back from phone Asterisk then forwards inbound call to 'Local/number@context' thanks to phone 2 problems with the CDR: 1. intermittent 'bill sec' accuracy, sometimes 0 even when the

> -----Original Message----- > From: JR Richardson [mailto:jmr.richardson@gmail.com] > Sent: Saturday, June 17, 2006 2:30 PM > To: asterisk-users@lists.digium.com; Douglas Garstang > Subject: Voicemail with NFS (working, I think) > > I'm using a stand-alone VM server and exporting the VM files ro for > MWI function only. All my registration servers mount the remote

OK this was an easy one to fix. All I had to do is RTFM. Note on the wiki: ATTENTION: Make sure you take a look at bug report 7144 Just do what Kevin said, include the regcontext in whatever static context you have the priority 2 extension and don't make a static regcontext in extension.conf. Let sip module do the rest. Works great. Thanks Guys. JR On 12/5/06, JR Richardson

Hi All, I'm trying to track down an intermittent echo issue. My setup is <phone>sip<asterisk>sip<tnt>pri to carrier less than 10ms latency on the network, 100% SIP, ULAW I have several different phones; cisco, linksys, polycom, snom. It's difficult for me to reproduce the problem regularly so I'm really having trouble isolating anything. I'm wondering if this

I've replaced 2XTE110 with an A102 with echo cancellation specifically to deal with echo problems. However, user feedback has indicated to me that on some calls (not a lot, but some) the call is unusable, with audio artifiacts, described by one user, as: "very bad phasing reverb & feedback (from my rock & roll days)". This is quite intermittent, as in most cases, the user

We are having intermittent problems where the person we call reports static when we place an outgoing PSTN call. Only the person called hears static, to us the conversation sounds fine. Never happens on inbound calls. It doesn't matter what channel you call from (IAX, SIP, or Zap). We have a Sangoma A108D with hardware echo cancellation with 2 PRIs to Level3 and 2 PRIs to a Nortel Option

Is this with Asterisk in the RTP stream? Is it doing any transcoding? > -----Original Message----- > From: JR Richardson [mailto:jmr.richardson@gmail.com] > Sent: Tuesday, April 18, 2006 9:34 AM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Asterisk Performance 350 Concurrent > ChannelsWorking Nicely > > > Hi All, > > This is a performance

On 1/28/08, JR Richardson <jmr.richardson at gmail.com> wrote: > > You need to take a step back and first test the script without using > > MRTG. Execute it like this: > > # /opt/bin/asterisk-mrtg -h localhost -u XXX -p XXXX -1 SIP -2 Zap > > 10 > > 10 > > 10 > > 10 > > > > You should get 4 lines of numbers. That respresents your SIP

Three sites are experiencing ~10sec period of one-way audio. This happens several minutes into the call, and it is very intermittent (infrequent). It does not happen on inter-office calls but only on calls to/from the PSTN. Occasionally, a spurt of white noise precedes the drop-out much like a cell phone drop-out. One site uses one port of a Sangoma A102X (PCI-X). Another site uses a

Hi All, I'm running 1.2.9.1 and have a sip user setup with accountcode=4444 in the context. lab1*CLI> sip show peer 1234 * Name : 1234 Secret : <Set> MD5Secret : <Not set> Context : sip1004 Subscr.Cont. : <Not set> Language : Accountcode : 4444 AMA flags : Unknown CallingPres : Presentation Allowed, Not Screened Callgroup

Hi All, Simple scenario: 7940 SIP><NAT Router><INTERNET><Asterisk SIP B2BUA w/Public IP Inbound/outbound calls work fine 2 way audio, features ok, no issues that I can tell so far. 7940 SIP Using Outbound SIP Proxy><NAT Router><INTERNET><Asterisk SIP w/Public IP Phone registers, call in/out SIP Signaling traversing the proxy ok no audio on phone, SDP

Hi All, http://www.voip-info.org/wiki/index.php?page=Asterisk+func+cdr Under example: exten => s,2,Set(CDR(MyFavoriteBand)=Foo Fighters) exten => s,3,Set(CDR(MyFavoriteSong)=Hero) and under description: -userfield: The channel's user specified field. ""-any custom value that you wish to store."" My question is how do you setup more custom fields in the cdr and be