similar to: AudioCodes MP-114 - SAS (Stand Alone Survivability) configuration

I was able to setup AudioCodes MP-114 to rote calls form FOX to Asterisk and make internal calls: Routing Tables -> Tel to IP Routing: *, *, 10.0.0.109 (my asterisk IP) But I'm not sure how to setup AuioCodes to make calls out via FXO? In extensions.conf [Globals] pstn-5665=10.0.0.157 Whenever, I try to call out I get a busy signal. -- Joseph

I have an Audiocodes MP-114 and modem dial-out can not establish connection. Snooping with Wireshark I get a lot of entries like this: No. Time Source Destination Protocol Info 2934 27.221559 10.0.0.110 10.0.0.109 RTP PT=ITU-T G.711 PCMU, SSRC=0x7D08611A, Seq=7662, Time=1805957855 Frame 2934: 214 bytes on wire (1712 bits),

Hi list, I'm trying to get ready the MP-104 FXO to use qith my box, but when I send calls I hear only dial tone and after a few seconds I get busy signal. I very appreciate your advices. Command line results and SIPconfigurations follows: *CLI>* -- Executing [7991696900 at total:1] Playback("SIP/101-09dd8918", "beep") in new stack -- <SIP/101-09dd8918>

Hello, Anyone here have experience with Audiocodes MediaPack MP-108 Gateways? I would be willing to pay someone for advice and support with configuring my gateways for a telemarketing project I am starting. My experience is somewhat limited but all I want to do is make outbound calls just like I would on normal pots lines. (That's the best way to explain it) I do not need any special

It's noisy while talking. Any idea? Thanks in advance. Jason ____________________________________________________________________________________ Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates (http://voice.yahoo.com)

Hello: Is that possible? Do I have to upgrade first to firmware version 6.4? Does firmware version 6.4 exist? Thanks in advance. Regards. -- Usuario Linux Registrado # 342019 --> http://linuxcounter.net/ <-- skype --> luedcortes gtalk --> luedcortes at gmail.com msn --> luedcortes at gmail.com

Hello all, I'm working on a little project right now and have ran into a snag. Was hoping someone would be kind enough to give me a few pointers to help me get past the current issue... I have an AudioCodes MediaPack MP-114 (2FXS and 2FXO... SIP firmware...) that I'm trying to get to play nice with Asterisk 1.4. I've got it to the point where the AudioCodes box picks up

Has anyone used the AudioCodes MP-20x? http://audiocodes.com/Objects/Analog_Telephone_Adapter_Series_MP_20X.pdf Seems like a good device, but I can't seem to find anyone actually using them... -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061022/6ca85b8c/attachment.htm

We are currently moving away from a wide-spread Cisco CallManager deployment to Asterisk. For many of our small sites we have the routers configured for what Cisco calls SRST so if we have a WAN failure, the router acts as a SCCP registrar. We are converting to SIP, and from what I can tell Cisco wants a license for each router to run SRST over SIP... So my question to the group is: What are

I've MP-114 that is working configured and working OK with my Asterisk but I just obtained MP-112 (2xFXS) and I can register OK with asterisk but I can only dial 3-digit extension. Anything longer than 3-digits is cut off, example I dial extension 1000: [Apr 29 10:03:30] NOTICE[3817][C-000000e9]: chan_sip.c:25902 handle_request_invite: Call from '54' (10.0.0.115:5060) to extension

Sir, Here is the working Audiocodes MP-11X FXO configurations to work with Asterisk. ;************** ;** Ini File ** ;************** ;Board: MP-118 FXO ;Serial Number: 905371 ;Slot Number: 1 ;Software Version: 5.00A.024 ;DSP Software Version: 204IM => 209.13 ;Board IP Address: 192.168.0.195 ;Board Subnet Mask: 255.255.255.0 ;Board Default Gateway: 192.168.0.1 ;Ram size: 32M Flash size:

guys, what firmware version of audiocodes mp104 fxs are you using with asterisk? i'm having sip stack problems. ~kelvin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030916/50d5f5de/attachment.htm

I am currently installing an Audiocodes MP-108 with Asterisk in Singapore. I am able to make outgoing calls but incomming calls just get cut by the MP-108 I can see the corrosponding frontpanel led light p but the call gets cut so I'm very confused about what could be wrong. Could this problem have something to do

I'm trying to define distinctive rings for lines in this gateway but don't works. Nothing happen when sending a call...the phone doesn't ring.... The same configuration works fine for PAP2NA devices. Adriano Almeida Flickr agora em portugu?s. Voc? clica, todo mundo v?. Saiba mais. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Razza, I have a MP114 FXO/FXS that I have never got to work , even as an FXS, even though I have several other FXS's that work fine ie Linksys PAP2 etc.. would you put up your config? PDE

Does anyone have configs on the MP-108 FXO to asterisk setup? I'm doing my best with the limited docs, but having very little success. Thanks, -Darren

My experience with an MP-108 was similar. Incredibly complex to setup, and very little help from MFR, or even ABPTECH, the main US reseller. We just couldn't get it working properly. Ended up with a TE110P with an Adit 600 channel bank, which ROCKS. Unbelieveably easy to setup. No echo whatsoever. -Darren

Hi: We're offering some sort of reward to that one who can help us For this site we are using trixbox and Asterisk 1.2 More info off list. Many thanks, Carlos -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070927/4b058148/attachment-0001.htm

I'm trying to get a MP-114 FXS/FXO gateway working with Asterisk. It registers fine and I can call between the MP-114 and other extensions, but I'm not having much luck with the FXO ports. syslog shows the problem to be in the MP-114 configuration. Can anyone help?

I'm having problem passing Caller ID to asterisk from AudioCodes MP-114 (FXO) AudioCodes is passing the caller ID to Asterisk but Asterisk is trying to interpret it as authentication: [Dec 31 11:41:07] WARNING[9752]: chan_sip.c:8553 check_auth: username mismatch, have <pstn-5665>, digest has <pstn-1270> [Dec 31 11:41:07] NOTICE[9752]: chan_sip.c:14316 handle_request_invite: