similar to: iaxmodem to ReceiveFAX crashes Asterisk equipped with B410P

Hi, On a new Raspberry2 with Asterisk 11.13.1 binary-installed, ReceiveFAX exits with FAILED status. Each attempt is made with something like: channel originate Local/12345 at faxgateway application SendFAX myfile.tif I'm not sure if failure "mostly" comes from SendFAX or from ReceiveFAX but it fails with 100% rate. uname -a output is: Linux myhost 3.18.7-v7+ #755 SMP PREEMPT

Morning, Have some questions regarding receiving and sending faxes... 1:st example: exten => 101,1,Answer() exten => 101,2,Wait(3) exten => 101,3,ReceiveFAX(/var/spool/asterisk/tmp/fax.tiff) exten => 101,4,System(tiff2pdf -p A4 /var/spool/asterisk/tmp/fax.tiff > /var/spool/asterisk/tmp/fax.pdf) exten => 101,5,System(mutt -s 'New FAX for you sir' -a

Hi, Do you have any example showing how to use SendFAX ? I can see several examples of ReceiveFAX but not a single one showing SendFAX. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081127/b41ca08b/attachment.htm

Hello users, have been facing problems with t38 passthrough using asterisk 1.6.0.3. observed also that in case of SendFAX we are not having major issues, its almost successfull. ReceiveFAX has problems most of the time. we have been using a ringcentral account for testing this receivefax. so ringcentral is trying for 3 times if the sending fax failed for the first time. what i observed is

A few weeks ago, I lost my Trixbox that was all set up with Hylafax and IAXmodem. I am trying to set it up for email > procmail > faxmail > iaxmodem > asterisk >sipext > ATA (with attached fax). I have followed all the instructions on creating the IAX extension and configuring the IAXmodem config file. I can see the connection in Asterisk: iax2 show peers Name/Username

hi, today i upgraded from asterisk 1.4.21 to 1.6.2.9 (i know this release is not supported anymore, please don't tell me to upgrade). unfortunately now i can't use the rxfax() application anymore. i tried to use ReceiveFAX() the way i used to use rxfax() (multiple dedicated fax extensions getting their faxes from isdn via zaptel/dahdi), but this doesn't work. either fax

Using spandsp-0.0.6-pre17, SendFax on 1.6.1.18 and ReceiveFax on 1.6.2.8. Sip.conf on both sides has t38pt_udptl = yes. -- Executing [s at fax-tx-test:3] SendFAX("SIP/side-sip-00000009", "/var/spool/asterisk/fax/20091113_1455.tif") in new stack [Mar 20 17:05:34] WARNING[6433]: app_fax.c:178 phase_e_handler: Error transmitting fax. result=49: The call dropped

Hi all, I'm installing Hylafax on my Asterisk system. From what I've read, I can either use IAXModem or T38Modem to provide the virtual fax device. So at the risk of starting a religious war, which one should I use? I don't mind running IAX if I have to. I want as much flexibility and stability as I can get. So, what are your recommendations? Mike. -------------- next part

My set up is 1.6.0.15 with the digium fax modules. I want to capture a fax from the internal analog fax machine (using an SPA2102), and then resend it. I know the internal extension of the fax machine, and for now I'm just testing it to one outside fax machine if I dial 8447. In particular, I'm completely unfamiliar with the use of "G" in the Dial app. exten =>

Hello. I've been trying to setup Free Fax for Asterisk on a Debian machine with Asterisk 1.8. I have managed to register and installed the Digium modules. Sending and receiving through it have resulted in failure. The output of fax show capabilities is: Registered FAX Technology Modules: Type : DIGIUM Description : Digium FAX Driver Capabilities : SEND

For our internal fax machines, I'm checking if the faxes are going to branch offices. If they are, I want to capture and email them to the branches. I've set up extension 8447 to test this. A fax machines is connected via an SPA 2102 on 173. Any calls from 173 are sent to: [outbound-fax] exten => 8447,1,Answer() exten => 8447,n,GoSub(Capture-Fax,s,1) exten

dialplan [FaxIncoming] exten=s,1,NoOp(Incoming fax on 46-va) same=n,Set(FAXFILE=/var/spool/asterisk/fax/${STRFTIME(${EPOCH},,%Y%m%d)}_${STRFTIME(${EPOCH},,%H%M)}) same=n,Answer() same=n,ReceiveFAX(${FAXFILE}.tif,df) same=n,Hangup() exten=>h,1,NoOp(FAXSTATUS: ${FAXSTATUS} FAXERROR: ${FAXERROR} FAXPAGES: ${FAXPAGES} @ bitrate ${FAXBITRATE}) same=n,System(scp ${FAXFILE}.tif

Hi all, I've got a perl agi script that exec()'s the FFA version of receivefax to... receive a fax. However, after the fax is received, the script seems to die. This is what I have: $main::agi->exec("receivefax","/tmp/${$}.tiff|fs"); $main::agi->verbose("FAX COMPLETE",1); I never see the "FAX COMPLETE" message on the console, I've set

Hello, I've got an analog phone which is currently receiving unsollicited FAX calls from PSTN. For learning purpose, I'm preparing an Asterisk/SPA3102 setup that would let voice calls come in and out and translate incoming FAX calls to TIF files (forwarded through email)). My target setup is : PSTN <-- analog--> SPA3102 Line Port <-- SIP --> Asterisk <-- SIP -->

Hello, We're trying to receive G.711 (aLaw) faxes on the asterisk and convert them to tif. With T.38, we have several issues, so we are trying to use G.711, since the gateway is located in the same LAN, so there's no bandwidth/packet-lose issue. We also use on the same Asterisk Real-Time process for the extensions.conf My question: Is the following syntax for disabling T.38 support

Hello, I have a noticed strange behavior in Asterisk 1.6.18.2 with ReceiveFax Digium FAX Driver: 1.6.2.0_1.3.0 (optimized for i686_32). I use a context [capi-in] for icoming ISDN calls: ====== [capi-in] ; Faxe fuer Ruben exten => 12345,1,Macro(faxin,ruben.roegels at jumping-frog.org,${EXTEN}) ====== My macro for the fax receiving looks like that: ====== [macro-faxin] ; Faxe ; ARG1 =

Hi all, I wanted to switch from my current setup (mISDN) to the native dahdi with b410p support (wcb4xp). All works fine for normal phone calls but not for faxing. Faxes are distorted, if arriving at all, and hylafax logs the usual bad stuff (HDLC frame not byte-oriented.) Our setup uses a digium b410p card with asterisk 1.6, latest libpri and dahdi, hylafax with iaxmodem, and all this on 1

Hello users, Recently i have installed the free version of FaxForAsterisk and trying to work with it by sending a fax on T38. My version information is as follows i)Asterisk 1.6.0.20 ii)res_fax-1.6.0.14_1.1.6-x86_32 iii)res_fax_digium-1.6.0.14_1.1.6-i686_32 sip.conf [general] t38pt_udptl=yes extensions.conf [default] exten => _XXXXXXXXXX,1,NoOp(Fax Incoming Call) exten =>

To provide a reliable fax solution for users connected to a Asterisk 1.6.2.6 server i have tested a few T.38 capable ATA's: - Patton M-ATA - Grandstream HandyTone 486 - Fritz!Box 7170 I have tried Asterisk 1.6.2.6 compiled with SpanDSP-0.0.6pre17 and also Asterisk 1.6.2.6 with Fax for Asterisk installed. These Asterisk servers are connected to a Cisco PGW 2200 + AS5400XM. Sending fax

Hi! Have probably not understand how fax is working in Asterisk 1.6. I did install: ptlib-v1_12_0 h323plus-v1_19_7 dahdi-linux-complete-2.2.0.2+2.2.0 spandsp-0.0.5 asterisk-1.6.2 asterisk-addons-1.6.2 make menuselect in asterisk-1.6.2 source directory shows: [*] app_fax But "core show applications" doesnt show me any "fax applications" and when I try to receive a fax: