similar to: SIP Incoming / Inbound not working for Broadvoice (Asterisk PBX 1.6.1.6)

Hi all Can someone explain me this: ifcfg-eth0-range1: ONBOOT="yes" IPADDR_START="192.168.1.48" IPADDR_END="192.168.1.55" CLONENUM_START="1" Why Bcast is 192.168.1.51 and why Mask is 255.255.255.252 ? OS: Centos 6.3/64bit Thanks Levi # ifconfig eth0:1 Link encap:Ethernet HWaddr 00:9C:02:99:FA:00 inet addr:192.168.1.48

Monitoring a tcpdump between two systems, a FreeBSD 9.1 system has the following interface: msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=c011b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4,VLAN_HWTSO,LINKSTATE> ether 00:11:2f:2a:c7:03 inet 10.0.1.199 netmask 0xffffff00 broadcast 10.0.1.255 inet6 fe80::211:2fff:fe2a:c703%msk0 prefixlen 64 scopeid

Hi, Thanks to John Wice for helping me with an earlier question. My two PCs behind the same router are still having problems connecting. Would appreciate thoughts on what I?m doing wrong? Router: Port 655 forwarded to 192.168.1.45, both TCP and UDP Port 656 forwarded to 192.168.1.51, both TCP and UDP Machine #1. ========== Local IP address on LAN = 192.168.1.45 Windows Firewall

Hi - Thanks to Sven-Haegar and Donald, but still having issues setting up with Windows. Machine1 can't ping the VPN address of machine2. Regular IPv4 address for both machines in 192.168.1.xxx range. Router: Forwarding port 655 to 101.102.103.1, UDP and TCP Forwarding port 656 to 101.102.103.2, UDP and TCP Tinc.conf on machine user1 just three lines: Name = vpnuser1 ConnectTo =

Before starting xend (xen 3.0) these are my correct network interfaces: eth0 Link encap:Ethernet HWaddr 00:14:5E:0A:53:04 inet addr:192.168.1.51 Bcast:192.168.1.255 Mask:255.255.255.0 eth1 Link encap:Ethernet HWaddr 00:14:5E:0A:53:05 inet addr:192.168.1.52 Bcast:192.168.1.255 Mask:255.255.255.0 lo Link encap:Local Loopback inet

Hi, I have a Polycom 501 that is currently unusable because I started a firmware and sip upgrade that I can't complete. The Ubuntu box address is set static at: 192.168.1.101. The phone address is set static at 192.168.1.51. The phone settings for the server menu are: Server Type: Trivial FTP Server Address: 192.168.1.101 Server User: PlcmSpIp Server Password: PlcmSpIp (not sure what it

Hi folks, First of all I have a well-working samba-2.2.2-20011013 on a Redhat 7.1 with 2.4.7. (Fast like a thunder 8-). Good job guys!) But. I have a little problem with printing: At my work we have only NT 4.0 workstations on our LAN with sp6a or sp5. This problem is appearing when a client try to print onto a printer attached to samba. Sometimes. But sometimes not. > api_net_sam_logon:

Hi I installed the following driver. http://www.f.csce.kyushu-u.ac.jp/~shigeaki//software/freebsd-nfe.html Before I had the nve driver which was unstable on this server and on a prior server in both cases causing either spontaneous reboot or just a crash when under load. So far touchwood the nfe driver has stayed up and running at almost 3 days uptime and has had some stress. I know the driver

Hi, I'm trying to use samba with ldap because I've several server with samba and it would be impossible to add the users to every server. I'm using samba from debian unstable andfollowing the smb-ldap-3-howto but I'm having this error: Sep 12 12:26:08 tele nmbd[24587]: [2002/09/12 12:26:08, 1] nmbd/nmbd_processlogon.c:process_logon_packet(100) Sep 12 12:26:08 tele nmbd[24587]:

I'm trying to mount a samba share located on one Linux server to another samba server for backup purposes. The problem im running into is that i get an error stating: couldn't find service <share I am specifying> Here is what im attempting: One server #1 sambaserver, Where I want the share to be mounted for backup purposes smbmount //valhalla/backupdir /backuparea/valhalla If

Hello, while checking new mtu9k-setup, I discovered that ping has some odd behaviour. If I use payloadsize > 4067, every 2nd icmp-echo-request seems to be malformed: ping -s 4068 -D 10.5.49.65 1st: 12:21:09.048447 IP 10.5.49.126 > 10.5.49.65: ICMP echo request, id 46597, seq 0, length 4076 0x0000: 4500 1000 0f2d 4000 4001 a507 0a05 317e 2nd: 12:21:10.052891 IP 10.5.49.126 >

hi all, i am setting up a load balancing netwrok with failover, i have applied julian patch, but whenever i try to traceroute from any client node, it gives me two entries for that destination, but i get different interface for that entries, so it doesn''t forward my requests, i have done masquerading for client nodes, the ip rule/route are as follows, ip rule add prio 222 table

Hello, I deployed a Rails App using Switchtower and now I''m getting a Routing Error to my Javascript and Stylesheet files. Has anybody else had this issue? Here is the log file. > ActionController::RoutingError (Recognition failed for > "/javascripts/prototype.js"): > /vendor/rails/actionpack/lib/action_controller/routing.rb:470:in >

I've been trying to build a model cluster using three virtual machines on my home server. Each VM boots off its own dedicated partition (CentOS 7.3). One partition is designated to be the common /home partition for the VMs, (on the real machine it will mount as /cluster). I'm intending to run GFS2 on the shared partition, so I need to configure DLM and corosync. That's where I'm

Hey, someone just told me yesterday that I can give my machine an initial IP address, gateway, dns server, and netmask via command line like this: linux ks=http://www.mydomain.com/kick.ks ip=192.168.1.5 netmask=255.255.255.0 gateway=192.168.1.1 dns=192.168.1.10 Is this true? Is the syntax wrong or right? If so, and I call my kick.ks file and it has install cdrom it'll pull the files

Hi all Can anyone tell me how to set up the w2k PDC to accept a samba unix server to join the domain. What do I need to perform on the w2k box to enable me to join to its domain. Regards

Thanks a lot for your help so far. The main reason I do not use vms is that the server is pretty limited in RAM so this would only be my last resort. To prevent confusion: srv.wie (192.168.1.50) is the same machine as smb.wie (192.168.1.55), I seperated them just now to debug the problem. > These look like they are being run on the DC, what about from the > windows clients ? > I did

I have an adit 600 with one fxo card connected to a Digium single span T1 card. CallerID, disconnect supervision work perfect, however the users complain that they have some sound quality issues, after testing it I realized that whenever one is in a phone call they get like silence between the sounds coming from the other party, almost like a cell phone, in other words if there is no sound coming

> > This sounds like a dns problem, are your windows machines using the DC > as their nameserver ? > yes they are using the server as dns. DNS is done through bind9 and implemented in samba via bind9_dlz. All looks fine: $ host -t A smb.wie smb.wie has address 192.168.1.50 $ host -t SRV _kerberos._udp.smb.wie _kerberos._udp.smb.wie has SRV record 0 100 88 srv.smb.wie. $ host -t SRV

Make sure your router supports nat reflection and has it enabled. On Mon, Jul 13, 2015 at 5:44 PM, Adam Macielinski <adam at macielinski.net> wrote: > Hi, > > > > Thanks to John Wice for helping me with an earlier question. My two PCs > behind the same router are still having problems connecting. Would > appreciate thoughts on what I?m doing wrong? > > > >